Airsoft GI small logo

Accessories / BBs / Magazines / Batteries / Gas » Batteries / Chargers / Gas » Lithium Battery Bookmark and Share

Valken Energy 7.4v 1600mAh 2s 20C LiPO Mini Battery

[K11E00][14732 / 48221]
$22.99
( 1 Reviews ) ❤ Add to Wishlist
ADD TO CART

Please Note: Lithium Polymer batteries MUST be charged with a Lithium Polymer Balance Charger!

Description:
Lithium Polymer batteries are the newest available batteries for airsoft and other hobby toys. They are designed as a light weight, high output power source. This 7.4v Li-Po battery can deliver more power than 9.6v Ni-MH large type battery with only half of the size and a third of the battery cells.

Specifications:
Manufacturer: Valken
Voltage: 7.4v
Milliampere Hours: 1600mAh
Cell Type: Lithium Polymer (LiPo)
Connector Type: Mini
Recommended Fit: M4A1, AK, M14, MP5, G36

    LiPoSack Use and Safety Instructions:
    Battery safety:

    ∑ Lithium Polymer batteries are volatile. Failure to adhere to established charging guidelines may result in fire, personal injury and damage to property if charged or used improperly.

  • The makers of LipoSack or its distributors or retailers assume no liability for failures to comply with these use and safety guidelines.
  • By purchasing this product, the buyer assumes all risks associated with its intended use. If you cannot comply with these guidelines please return this product unused to your retailer.


    1) Charge batteries in a safe area away from flammable materials and only on a non-flammable surface in a vented area. Do not discharge batteries below 3 volts/cell. Doing so may result in cell damage and subsequent cell venting upon a subsequent charge.
    2) Do not recharge damaged batteries. Dispose of damaged batteries in the proper manner.
    3) Some Lipo chargers on the market may have technical deficiencies that may cause it to charge the battery incorrectly or at an improper rate. It is your sole responsibility to assure that the charger you purchased works properly. Always monitor the charging process to assure batteries are being charged properly. Failure to do so may result in cell damage or fire.
    4) In the event of a crash, you must remove the battery from the model for observation and place in a safe open area away from flammable materials.

    LipoSack Use Instructions:

    1) Ensure that charger rate is properly set and polarity is correct.
    2) Attach charging leads to battery.
    3) Place battery in LipoSack towards the bottom.
    4) Place LipoSack on non-flammable surface.
    5) Route charge leads through vent at the top seam of the LipoSack.
    6) Close top flap of LipoSack and press hook and loop closure fully closed.
    7) Charge battery using proper charging practices.

Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.

Specifications
Manufacturer: Valken
Color: Green / Black
Material: Lithium Polymer
Package Includes: One (1) Battery
see 1 reviews | Write a Review
verified buyer
J. MCBREARTY | 2014-01-28
Product Information:
Don't let the small size of this battery fool you! It has the power of a 9.6v NiCd, but it's only half the size! Perfect for guns with limited battery space like an AUG, Tavor, or Sten/MP40.

Pros:
-Great power output
-Small size perfect for bullpup airsoft guns
-Average mAh


Cons:
-LiPo charger required
-Potentially volatile, and improper care can result in an accident
 
Will this fit a JG F6613TAN SR16 RIS M4 Carbine AEG Airsoft Rifle Enhanced Version
JG F6613TAN SR16 RIS M4 Carbine AEG Airsoft Rifle Enhanced Version

558 days ago
Zach M
0
0

(I have this same question)
Staff Answer:
I would recommend getting a nnchuck shaped battery. They're shaped to fit in alot of guns.

558 days ago
0
0
1 answers
1 asked
 
Fitment
will it fit in a Echo 1 Troy MRF-C buffer tube?

1744 days ago
Brandon B
0
0

(I have this same question)
Staff Answer:
No, however a compatible item has been listed below: <BR><BR> <a href="http://www.airsoftgi.com/product_info.php?products_id=11913">Tenergy LiPo 7.4V 1000mAh 20C Stick (Battery) [Link]</a>

1743 days ago
0
0
1 answers
1 asked
 
Will it fit?
Will this fit in the stock of the ares amoeba am-013

1812 days ago
Riley A
0
0

(I have this same question)
Staff Answer:
No

1812 days ago
0
0
1 answers
2 asked
 
Chargers
What chargers do you recommend for this battery?

1818 days ago
Jeff P
0
0

(I have this same question)
Staff Answer:
A LiPo charger

1818 days ago
0
0
1 answers
1 asked
 
Would this fit in.
Would this fit in a PEQ-15 battery box?

1912 days ago
Bert M
0
0

(I have this same question)
Staff Answer:
No

1909 days ago
0
0
1 answers
1 asked
 
Will this fit in a cyma rpk 0 answers
1 asked
 
Will this work in a polarstar?
im thinking about making a polarstar AK custom, and I would like to know if this will connect to the polarstar fusion engine without many modifications. If any mods are required please tell me what they are!

1973 days ago
Alyssa S
0
0

(I have this same question)
Staff Answer:
This will not work with the FCU. You will need a JST connector or adapter that we sell.

1973 days ago
0
0
1 answers
1 asked
 
Fit
Will this fit a VFC M27 IAR?

1975 days ago
Martin P
0
0

(I have this same question)
Staff Answer:
No

1974 days ago
0
0
1 answers
1 asked
 
What peq box will it fit in it?
What peq box will it fit in it?

2014 days ago
Elvis P
0
0

(I have this same question)
Most PEQ-2 battery boxes.

1993 days ago
Coley W
0
0
1 answers
2 asked
 
Fitment
Will it fit in the Echo 1 Red Star LMG?

2021 days ago
Austin C
0
0

(I have this same question)
Staff Answer:
It should be able to fit

2021 days ago
0
0
1 answers
1 asked
 
fitment
Will this fit a peq 15 or peq 16 box

2024 days ago
adrian p
0
0

(I have this same question)
Staff Answer:
It will not fit

2022 days ago
0
0
1 answers
1 asked
 
vfc 416c
Will this fit in a vfc 416c peq box

2049 days ago
ANDREW W
0
0

(I have this same question)
Staff Answer:
This battery will not fit.

2048 days ago
0
0
1 answers
1 asked
 
Fitment
Will this fit in a KWA G36? The length and depth listed n a previous question seem fine, but im worried about the width.

2059 days ago
Lukas B
0
0

(I have this same question)
Staff Answer:
The best battery would be the 9.6v 1600 mAh nunchuck style battery.

2058 days ago
0
0
1 answers
1 asked
 
Charger
I really don't know how these work, but is it possible to charge lipo's with smart chargers?

2112 days ago
Andy S
0
0

(I have this same question)
Staff Answer:
No. Lipo batteries will require you to use Li-Po Balance chargers.<br><br> <a href="http://www.airsoftgi.com/index.php?cPath=27_74_639">http://www.airsoftgi.com/index.php?cPath=27_74_639</a>

2111 days ago
0
0
1 answers
1 asked
 
what are the dimensions for the Valken Energy 7.4v 1600mAh 20C LiPo Mini Battery
the only reason I ask is because it dose not tell me the dimensions on the sight and I want to put it in a lancer tactical PEQ box battery holder.

2128 days ago
Bruce J
0
0

(I have this same question)
Staff Answer:
3.5"L x 1.4"H x .5"D

2127 days ago
0
0
the only reason I ask is because it dose not tell me the dimensions on the sight and I want to put it in a lancer tactical PEQ box battery holder.

2128 days ago
Bruce J
0
0

(I have this same question)
Staff Answer:
3.5"L x 1.4"H x .5"D

2127 days ago
0
0
2 answers
1 asked

Other Great Deals and Accessories:
Select the item from the Drop Down Menu and click add.

Gear Accessories
 
Search Tags: Lithium Polymer 2 Cell Cells Battery Valken 7.4 1600 mAh 1600mAh 20C LiPo Lithium Polymer Phosphate PO4 Li ion Fe Iron

For Questions, Answers and Comments:

Talk about the Valken Energy 7.4v 1600mAh 2s 20C LiPO Mini Battery with your friends on the facebook comments box below:
Copyright © 2019 Airsoft GI
Disclaimer:

All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.

Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.

By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.