Valken Energy 11.1v 1600mAh 3s 20C LiPO Battery

[K10A00][14734 / 48207]
$34.99
Write Review ❤ Add to Wishlist
ADD TO CART

Please Note: Lithium Polymer batteries MUST be charged with a Lithium Polymer Balance Charger!

Description:
Lithium Polymer batteries are the newest available batteries for airsoft and other hobby toys. They are designed as a light weight, high output power source. This 11.1v Li-Po battery can deliver more power than 12v Ni-MH large type battery with only half of the size and a third of the battery cells.

Specifications:
Manufacturer: Valken
Voltage: 11.1v
Milliampere Hours: 1600mAh
Cell Type: Lithium Polymer (LiPo)
Connector Type: Mini
Recommended Fit: M4A1, AK, M14, MP5, G36

LiPoSack Use and Safety Instructions:
Battery safety:

∑ Lithium Polymer batteries are volatile. Failure to adhere to established charging guidelines may result in fire, personal injury and damage to property if charged or used improperly.
 

  • The makers of LipoSack or its distributors or retailers assume no liability for failures to comply with these use and safety guidelines.
  • By purchasing this product, the buyer assumes all risks associated with its intended use. If you cannot comply with these guidelines please return this product unused to your retailer.


    1) Charge batteries in a safe area away from flammable materials and only on a non-flammable surface in a vented area. Do not discharge batteries below 3 volts/cell. Doing so may result in cell damage and subsequent cell venting upon a subsequent charge.
    2) Do not recharge damaged batteries. Dispose of damaged batteries in the proper manner.
    3) Some Lipo chargers on the market may have technical deficiencies that may cause it to charge the battery incorrectly or at an improper rate. It is your sole responsibility to assure that the charger you purchased works properly. Always monitor the charging process to assure batteries are being charged properly. Failure to do so may result in cell damage or fire.
    4) In the event of a crash, you must remove the battery from the model for observation and place in a safe open area away from flammable materials.

    LipoSack Use Instructions:

    1) Ensure that charger rate is properly set and polarity is correct.
    2) Attach charging leads to battery.
    3) Place battery in LipoSack towards the bottom.
    4) Place LipoSack on non-flammable surface.
    5) Route charge leads through vent at the top seam of the LipoSack.
    6) Close top flap of LipoSack and press hook and loop closure fully closed.
    7) Charge battery using proper charging practices.
     

 

Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.

 

Specifications
Manufacturer: Valken
No reviews | Write a Review
 
compatibility
Will this fit in a Lancer Tactical M4

310 days ago
Spongy S
0
0

(I have this same question)
Staff Answer:
This battery is very large and will require a stock with a large cavity to store. This will not fit into a standard crane style stock.

298 days ago
0
0
1 answers
1 asked
 
Will it fit?
Will it fit in a kytac crb mk2 stock?

356 days ago
Randy Y
0
0

(I have this same question)
Staff Answer:
They will not fit in the CRB stock.

356 days ago
0
0
1 answers
1 asked
 
Classic Army ECR 5 M4 Crane stock
Will these batteries fit in the above mentioned rifle/stock?

748 days ago
Noah W
0
0

(I have this same question)
Staff Answer:
They will not, the cells are too large

353 days ago
0
0
1 answers
1 asked
 
small tamya
would it work with a small tamya connector in my G&G combat machine

1067 days ago
dave j
0
0

(I have this same question)
Staff Answer:
It will connect but it may not fit

1067 days ago
0
0
1 answers
1 asked
 
Compatibility
Would this fit in a Ares Amoeba M4 Carbine

1460 days ago
Andrew S
0
0

(I have this same question)
Staff Answer:
No.

1405 days ago
0
0
1 answers
1 asked
 
PEQ Box
will this fit any PEQ Box? or what battery will?

1509 days ago
Noah K
0
0

(I have this same question)
Staff Answer:
It should fit in a PEQ-2 style

1508 days ago
0
0
1 answers
1 asked
 
Peq
What peq box will this fit in? If none, how should I house this in a 13" vtac rail?

1510 days ago
Michael A
0
0

(I have this same question)
Staff Answer:
This battery will fit in: <BR><BR> <a href="http://www.airsoftgi.com/product_info.php?products_id=12497">D Boy PEQ Battery box [Link]</a>

1502 days ago
0
0
1 answers
1 asked
 
Scar
Will this battery fit a vfc scar-l?

1534 days ago
brian y
0
0

(I have this same question)
Staff Answer:
Yes, there should be adequate space within the stock for this battery.

1532 days ago
0
0
1 answers
1 asked
 
does it fit in the handgaurd of a g&g gk99 0 answers
1 asked
 
will it fit?
will it fit in a kwa g36c?

1756 days ago
David C
0
0

(I have this same question)
Staff Answer:
It will not

1755 days ago
0
0
1 answers
1 asked
 
Magpul PDR
Would this fit into a Magpul PDR well?

1831 days ago
Scott M
0
0

(I have this same question)
Staff Answer:
No it will not fit

1831 days ago
0
0
1 answers
1 asked
 
Will this Fit in a Magpul Masada?
Will this Fit in a Magpul Masada?

1916 days ago
Kevin L
0
0

(I have this same question)
Staff Answer:
This should fit okay.

1916 days ago
0
0
1 answers
1 asked
 
crane stock fit?
will this tri panel battery fit a crane stock?

1932 days ago
lukas l
0
0

(I have this same question)
Staff Answer:
This battery won't fit crane stocks very well. This one might be a better choice for crane stocks: http://www.airsoftgi.com/product_info.php?products_id=11916

1930 days ago
0
0
1 answers
1 asked

Other Great Deals and Accessories:
Select the item from the Drop Down Menu and click add.

Charger
 
Gear Accessories
 
Search Tags: Lithium Polymer 3 Cell Valken 11.1 V 11.1V 1600mAh 1600 mAh 20C LiPo battery
This product was added to our catalog on Wednesday 10 July, 2013.
Copyright © 2019 Airsoft GI
Disclaimer:

All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.

Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.

By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.