UTG Model 4/15 Handguard Rail Systeml (Black)
[F04G00][08259 / MTU001]
Free Shipping for orders over $169 No Coupon needed New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Description:
The UTG Carbine Quad Rail Unit is a sturdy free floating RIS Handguard that clamps firmly onto real gun style delta rings. This rail is made with aircraft grade aluminum that is hard anodized for increased wear resistance.
Specifications:
Manufacturer: UTG
Design: M4 with real gun style delta ring
Features:
Precision machined with maximum strength.
Four mil-spec Picatinny rails for versatile accessory applications.
Simple and friendly installation, no gunsmith or tool required.
Solid locking features for most secure fit.
Ultimate tactical solution to enhance accuracy under toughest environments.
Fits CAR length model 4,15,16 and variants.
Hard anodized finish for wear resistance.
- Specifications
- Manufacturer: Leapers
see 39 reviews
| Write a Review
verified buyer
verified buyer
R. ROSENE
|
2013-01-07
Product Information:
This is a great rail for really anyone. When I got it, I thought I would have to buy rail covers, but it came with enough to cover all the rails. These rail covers on this rail is very flush with a Magpul RVG.
Pros:
- Great rail
- Comes with good rail covers
- Adds some weight to your gun, but that can be a good and a bad
Cons:
I can't think of a con. This is a great rail and is on sale for a good price.
This is a great rail for really anyone. When I got it, I thought I would have to buy rail covers, but it came with enough to cover all the rails. These rail covers on this rail is very flush with a Magpul RVG.
Pros:
- Great rail
- Comes with good rail covers
- Adds some weight to your gun, but that can be a good and a bad
Cons:
I can't think of a con. This is a great rail and is on sale for a good price.
verified buyer
E. RAMIREZ
|
2013-09-23
Product Information:
Great quality RIS for the price. I was having trouble finding a RIS to fit my KWA CQR. This RIS fits like a glove! No wobble what so ever! I'm able to fit a 7.4lipo in side the RIS no problem at all. The rail guards that come with it are very nice as well and give the gun that little extra tactical look.
If you're in the same boat as I was with having issues with finding an RIS to fit on a kwa CQR with out having to rewire to the rear. Look no further, this RIS is for you.
Pros:
Quality Finish
Lines up nicely with upper receivers rail
Rail guards that come with it are very nice and durable
Fits like a glove with no wobble
Price
Cons:
No cons at all. Great item like most UTG products
Great quality RIS for the price. I was having trouble finding a RIS to fit my KWA CQR. This RIS fits like a glove! No wobble what so ever! I'm able to fit a 7.4lipo in side the RIS no problem at all. The rail guards that come with it are very nice as well and give the gun that little extra tactical look.
If you're in the same boat as I was with having issues with finding an RIS to fit on a kwa CQR with out having to rewire to the rear. Look no further, this RIS is for you.
Pros:
Quality Finish
Lines up nicely with upper receivers rail
Rail guards that come with it are very nice and durable
Fits like a glove with no wobble
Price
Cons:
No cons at all. Great item like most UTG products
verified buyer
C. ALMEDA
|
2014-02-08
Product Information:
This is a rail system that will fit right into a RS style delta ring. This will fit most AEG's and GBBR's with very little effort with installation. You simply remove the old hand guard by depressing the delta ring, replace it with the UTG Carbine Quad Rail Unit and screw it on for a lock tight fit. This Quad Rail DOES NOT wobble at all. It also comes with 12 rail covers.
The price is pretty decent, it definitely gets the job done.
Pros:
-Easy installation
-Great quality
-Aluminum construction. Feels very strong and will take any abuse given.
-Sturdy when installed correctly, no wobble at all
-Comes with 12 rail covers. They are tight, I suggest to go from one end and slide down.
-Will fit most AEG's and GBBR's
Cons:
To be honest, the only con that I see is that while it may fit most AEG's, the batteries may not fit well inside of it assuming your battery location is in the hand guard. If your battery location is located in the rear then you have nothing to worry about.
Alternatively, you can get a PEQ Box for the batteries and mount it on the UTG Carbine Quad Rail.
I would suggest doing that if you have an AEG with the batteries in the front hand guard. Even if the batteries fit inside of the UTG Quad Rail, it can get tiring taking it on and off just for the battery.
This is a rail system that will fit right into a RS style delta ring. This will fit most AEG's and GBBR's with very little effort with installation. You simply remove the old hand guard by depressing the delta ring, replace it with the UTG Carbine Quad Rail Unit and screw it on for a lock tight fit. This Quad Rail DOES NOT wobble at all. It also comes with 12 rail covers.
The price is pretty decent, it definitely gets the job done.
Pros:
-Easy installation
-Great quality
-Aluminum construction. Feels very strong and will take any abuse given.
-Sturdy when installed correctly, no wobble at all
-Comes with 12 rail covers. They are tight, I suggest to go from one end and slide down.
-Will fit most AEG's and GBBR's
Cons:
To be honest, the only con that I see is that while it may fit most AEG's, the batteries may not fit well inside of it assuming your battery location is in the hand guard. If your battery location is located in the rear then you have nothing to worry about.
Alternatively, you can get a PEQ Box for the batteries and mount it on the UTG Carbine Quad Rail.
I would suggest doing that if you have an AEG with the batteries in the front hand guard. Even if the batteries fit inside of the UTG Quad Rail, it can get tiring taking it on and off just for the battery.
|
|
will this fit aKing Arms Nylon M4A1 Carbine AEG Airsoft Gun
Will it fit
2992 days ago William R
0
0
(I have this same question)
Staff Answer:
It should fit 2985 days ago 0
0
|
1 answers 1 asked |
|
|
Will this fit with a Classic Army M15A4? | 0 answers 1 asked |
|
|
Will it work for G&G Combat Macine M4
I do not like the handguard and I want a rail system for Combat Machine M4 will this work for it?
3176 days ago James M
0
0
(I have this same question)
Staff Answer:
It should work 3173 days ago 0
0
|
1 answers 1 asked |
|
|
Will this fit on King Arms M4 Ultra grade?
I don't know if the king arms has a real steel style delta ring.
3188 days ago John S
0
0
(I have this same question)
Staff Answer:
It should be able to. 3186 days ago 0
0
|
1 answers 1 asked |
|
|
AGM M4-A1
will this RIS fit a Agm full metal m4a1 and if so how do you put it on
3213 days ago Noah B
0
0
(I have this same question)
Staff Answer:
It should be able to fit, however modification may be required 3211 days ago 0
0
|
1 answers 1 asked |
|
|
will work on my CA armalite M15A4?
I don't have to worry about the battery because that's in the crane stock but I just wanted to make sure it would work
3239 days ago Jessica B
0
0
(I have this same question)
Staff Answer:
It should work 3239 days ago 0
0
|
1 answers 1 asked |
|
|
Will it fit a KWA LM4 PTR Gas Blow Back Rifle?
I bought a lm4 made by KWA and I want to put this rail on here, I know you are out of stock on them but I can wait. Can they fit on a KWA LM4 PTR with out modifications or very little modifications at the least?
3254 days ago Kenn S
0
0
(I have this same question)
Staff Answer:
It should be able to work with modification. 3253 days ago 0
0
|
1 answers 1 asked |
|
|
Will this fit on the kwa cqr mod 1 | 0 answers 2 asked |
|
|
dose it fit on a delta ring m4?
???
3271 days ago Jason L
0
0
(I have this same question)
Staff Answer:
This rail is designed for use on guns with a real steel style delta ring. 3270 days ago 0
0
|
1 answers 1 asked |
|
|
will this fit on the KWA CQR MOD2?
.
3330 days ago Bryan A
0
0
(I have this same question)
Staff Answer:
This should fit okay. 3329 days ago 0
0
|
1 answers 1 asked |
|
|
How long is the rail
In inches
3333 days ago andrea k
0
0
(I have this same question)
Staff Answer:
The rail length should be 7 inches. 3333 days ago 0
0
|
1 answers 1 asked |
Search Tags: RIS RAS M4 M16 Rail 7" Upgrade Handguard for M4 / M16 / AR15 Series Firearms
