G&G Turbo Fan for Goggles (Black)[ST01][03001 / G-07-040]
The G&G Turbo Fan for Goggles is more effective than using anti-fog solution. The fan is molded to a bracket for easy mounting onto the vent of goggles. The on/off switch has 12 inches of wire to remotely mount to the back strap of the goggles via elastic strap, which is also included in the kit. Also included with the kit are 2 zip-ties to securely mount the fan bracket and 2 AAA batteries.
Model: Turbo Fan for Goggles
12 inches of wire
Prevents fogged goggles
- Manufacturer: G&G
- Color: Black
- Package Includes: One (1) Turbo Fan
I finally got to field test this fan. These went on my full face mask. This all happened on a normal day in May. I got my new Proper BDUs so they were a little warm. This fan was so quiet, i thought it broke or stopped working. Fortunately the fan was still working perfectly and at the same time almost too quiet. Then it starts POURING rain. I thought for sure this little fan would short out or something. after about an hour of solid rain, we stop the game. The fan still worked after getting rained on directly for over an hour. Not to mention the fact that i had NO fog the entire day. Just to test it i kept it off until i had fog built up on the top of the lense. I flipped the switch and in about 3 minutes the fog was gone. If your going to make an investment into your gear, this is worth every penny.
doesn't cost much
eliminates the fear of fog, which always is a good thing
small but powerfull
...too quiet (you will think its broken because you can't even hear it when its 5 inches away from your ear)
you might need to mod your mask, but its not too difficult
it could break if it took a direct hit by a BB, but it's not likely to happen
If you own foggy goggles you know how depressing it is to stop and wipe out your mask every 5 minutes. You will thank yourself when you buy this fan. JUST BUY IT.
I bought this fan kit to mount onto my Save phace mask. I live in the deep south where humidty is king. My full face mask has been basically useless until I installed this fan. I have went though different types of anti fog with Revision being the best. But the anti fog would still only do so much. When you get the package it seems to be lacking and before installing the fan I thought I had wasted my money. It didnt come with any instructions other than a picture showing it mounted a to a set of goggles. When you put power to the fan you can not hardly tell it is pushing any air. The fan also looks fairly fragile so I didnt want it taking many direct shots from bbs. So after looking at different ways to mount the fan I decided to mount it on the inside of my mask directly in front of my mouth. My lips just barely miss the fan. I got a few small machine screws with washers and nuts at the local hardware store and used them to secure the fan to the mask. I ran the wire on the inside of the mask around to the outside of the mask where the ear protection was and mounted the battery pack to the hard plastic rather than putting it on the head band. I was able to put the mask to the test on a two day game in the heat. As usual the humidy was thick but to my suprise my mask stayed clear. I was even able to wear a pair of safety glasses underneath the mask so that when I was not in combat I could shed the mask and never compromise the protection for my eyes. The fan ran both days like a champ.
1. Does what it is suppose to
2. Quiet with little vibration
3. Runs for several hours without a change of batteries
4. If placed in the right spot in a full face mask it will be plenty strong enough to do the job without you or anybody else noticing it even running.
5. Worth the money seeing that my Save phace mask was useless until I bought this fan.
6. Now I can actually see the people that are giving me compliments for my custom painted mask
1. No directions
2. Fragile feeling
3. Wire could be a few inches longer
I own two different fans. I own this fan and the cyclone mike fan. I will say that the G&G turbo fan is very small in profile and does what it is supposed to do. I just wish ASGI would carry the cyclone mike too.
Uses common batteries
Low profile compared to other fans
Its a fan - great for unfogging goggles or keeping them from fogging
Does not work as well as i thought it would. Takes over two minutes to unfog goggles
Can only be attatched to certain goggles - I cant use it with my smith optics boogie sport goggles
Gets in the way of using a helmet
Have to solder the wires together
Will this work/fit on a full face mask?
I wanted to put this on a Valken Identity full face mask, but I need to know if it will work/fit on it.
2013 days ago
(I have this same question)
It works with all mask, it may require small modification that is all
2005 days ago
Will these work in these googles?
I have Revision Exoshield Extreme Low-Profile Goggles and I was wondering if the fan would fit because in a review it said it does fit all goggles.
3344 days ago
(I have this same question)
It should be able to fit, however, modification may be required
3343 days ago