Airsoft GI small logo

* Discontinued * Airsoft GI PE Reinforced Piston Sear for VSR 10/BAR 10 Series

Orders over $179 qualify for free shipping
Free Shipping for orders over $179 No Coupon needed
New to airsoft? Here are some safety tips for airsoft guns that we recommend following.

The Airsoft GI PE Reinforced Piston Sear for VSR10 / Bar10 Series is a high quality, high value, alternative to high priced Japanese upgrade parts that do the same exact thing! This piston sear is precision machined from high quality metal that can take a much higher stress load that stock components, resulting in more upgrade potential from your gun. Why pay more for the same result. Airsoft GI has always provided great value through our products, and great customer service through our staff, and we're not going to stop! View the chart below to see how the Airsoft GI PE parts perform.

Manufacturer: Airsoft GI
Design: TM VSR-10 (Including G-Spec), JG BAR-10 (Including G-Spec), HFC VSR-11, AGM MP001

M170 Spring 570-600 FPS 490-510 FPS N/A
Trigger Sear Modification Yes Yes Yes (Only trigger parts will work with this model)
*FPS Readings were made with Airsoft GI PE Piston, Spring Guide, and Sears.

Manufacturer: Airsoft GI
Color: Grey
Material: Metal
Package Includes: One (1) Piston Sear
see 3 reviews | Write a Review
verified buyer
H. FERNANDEZ | 2009-10-01
Product Information:
Once again the Airsoft GI brand comes through like a winner (see my review for the Airsoft GI VSR 10 precision inner barrel). This excellent steel piece holds up the load of the Laylax SP150 I bought with it. I had to do some slight grinding to the round near the pivot point to get it sit in the trigger sear properly but no biggie.

I strongly recommend this piston sear for anyone looking for a cheaper alternative to the name brand sears without sacrificing tinsel strength and quality. From my experience so far, you definitely need this if you upgrade your stock piston to an aluminum one; even if you are using the stock spring.

-Excellent hard steel

-Holds up the load of my SP150 spring

-Airsoft GI brand (as of now I have purchased 2 Airsoft GI brand products and both have been excellent in build quality and performance)

-Very minor tolerance issue with the overall size, almost not worth mentioning as a con.
verified buyer
J. SCOVEL | 2009-11-07
Product Information:
I was happy that airsoft gi offered an upgrade suite for the jg bar 10, in fact it was the main contributing factor in purchasing that rifle in place of the ares awp model. I have found this trigger sear lacking. I think at my level of technical inclination, this process offered too much a challenge. the upgrade including the sear works about 75% of the time, the other quarter is hamstrung with the sear locking and causing the gun to slam fire, which I find unnacceptable because to fix the problem requires a complete break down of the trigger firing mechanism. It works better after heavy lubrication

All in all, I would suggest that those interested in upgrading their remington m700 clone get the zero trigger which will fix the trigger sear issue, it's some bucks, but if you upgrade the way that most suggest, it will cost you bucks anyway.

inexpensive, it was a house brand (which I always prefer)

may cause slam firing which is annoying
S. SCHLEDER | 2010-01-16
Product Information:
Even though it is discontinued, I still think a review is in order. My friend bought this, and being the technician of our group, I had to install it along with other upgrades. It seems to work well enough, but as soon as I held it in my hand the little knob fell off of it. Great... It was already falling apart without even being used yet. It took over 2 hours to install because of the spring. But, so far his sniper fires fine and has had very few issues on an m150 spring. Though it does look to be getting quite a bit of wear on it after 1000 rounds.

-Works with the m150 spring
-Fit decently into the trigger sear

-Already noticible wear after 1000 shots
-knob fell off immediately
-Pain to install because of the spring
Search Tags: Reinforced upgrade internal

For Questions, Answers and Comments:

Talk about the * Discontinued * Airsoft GI PE Reinforced Piston Sear for VSR 10/BAR 10 Series with your friends on the facebook comments box below:
Copyright © 2023 Airsoft GI

All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.

Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.

By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.