Burst Wizard King Kong Super 2 Small Tamiya Connector Mosfet
[S04J02][16004]
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Specifications:
Manufacturer: Burst Wizard King Kong Super 2
Modes: Programmable
Package Includes: One (1) MOSFET System
Features:
Programmable Fire Modes
Pre-Setup ROF Adjustment
Compact Design
- Specifications
- Manufacturer: Burst Wizard
- Color: Black, Red
- Material: Rubber, Silicone, Metal, Plastic
- Package Includes: One (1) MOSFET System

greatly improves your gun everyone should get this now
Pros:
improves your gun , makes your battery last longer , and has amazing trigger response time
Cons:
none it is a great must have piece in anyone arsenal

This is a great little mosfet. It's really useful for all sorts of things.
Pros:
Small and easy to use
Sniper delay and mag delay for extra realism
If you have midcaps, mag delay can make your gun stop firing when you run out of ammo
Cons:
Might not fit in really small battery compartments

This MOSFET is really easy to use, and it has way more settings then I would have ever imagined. The plug and play aspect of it made all the difference in the world, although it comes with the option to hard wire it if that's what you are looking for. Very impressed!
Pros:
Ease of use
Lots of settings
Change on the fly
Cons:
Not always timed with the gearbox.
|
Will this fit an M4/M16 | 0 answers 1 asked |
|
Will it fit in ARX-160?
I have the Beretta Umarex ARX-160 Elite. Will I be able to use this mosfet in it?
3138 days ago Michael P
0
0
(I have this same question)
Staff Answer:
It should work 3137 days ago 0
0
|
1 answers 1 asked |
|
Ump
I have a H&K Ump and the battery compartment is pretty small. Will the mosfet wizard fit in there.
3142 days ago Erik S
0
0
(I have this same question)
Staff Answer:
No 3139 days ago 0
0
|
1 answers 1 asked |
|
Braking
Is this a active braking mosfet
3176 days ago Collin M
0
0
(I have this same question)
Staff Answer:
Yes, all King Kong MOSFETs have active and adjustable active-braking. 3175 days ago 0
0
|
1 answers 1 asked |
|
Protection
will this protect a HK M27 gearbox from 11.1 lipo damage?
3185 days ago Zach F
0
0
(I have this same question)
Staff Answer:
It will help protect the trigger contacts 3182 days ago 0
0
|
1 answers 1 asked |
|
will this work for the lancer tactical ak74u connector
will this work for the lancer tactical ak74u connector if not witch type of connector will.
3274 days ago Abdullah G
0
0
(I have this same question)
Staff Answer:
It should 3270 days ago 0
0
|
1 answers 1 asked |
|
Will this work?
Will this work with the jg ak -47 ris?
3282 days ago Keith K
0
0
(I have this same question)
Staff Answer:
It should 3278 days ago 0
0
|
1 answers 1 asked |
|
Restock?
when will you restock
3329 days ago zane z
0
0
(I have this same question)
Staff Answer:
We are working on getting more in stock 3328 days ago 0
0
|
1 answers 2 asked |
|
anti reversal latch
With the mosfets active braking feature will it be okay to remove the anti reversal latch from my v2 gearbox?
3392 days ago jeremy s
0
0
(I have this same question)
Staff Answer:
No, you still need the anti reversal latch 3389 days ago 0
0
|
1 answers 1 asked |
|
Can you program it to stop shooting when there is no bbs feeding.
Basically will it be able to simulate the mag emptying and stop shooting.
3398 days ago Grant B
0
0
(I have this same question)
Staff Answer:
No 3397 days ago 0
0
|
1 answers 1 asked |
|
Will this mosfet limit an AEG to semi-auto?
I play at a CQB field that is semi-auto only. The semi-auto in my favorite AEG broke though, keeping me from using it at that field. If I install this mosfet can I program it to limit me to one shot fired per trigger pull even when my gun does nothing to mechanically limit me to semi-auto?
3400 days ago Haines T
0
0
(I have this same question)
Staff Answer:
It is possible 3399 days ago 0
0
|
1 answers 2 asked |
|
can this fit a cyma cm032a m14?
just curious
3417 days ago Dorion H
0
0
(I have this same question)
Staff Answer:
It should 3413 days ago 0
0
|
1 answers 1 asked |
|
Lipo battery
Will it stop the gun from shooting before the lipo dies
3426 days ago drew r
0
0
(I have this same question)
Staff Answer:
Lipo protection is a programmable feature 3425 days ago 0
0
|
1 answers 1 asked |
|
Will this work with the RM4?
I'm not sure if this would mess up my RM4, because of the precocking setting. Would this also precock the kinetic feedback system, or just the spring? If it doesn't then the whole gun would be out of tune, when shooting.
3430 days ago Donna P
0
0
(I have this same question)
Staff Answer:
This will work with the RM4. You can take off the pre-cocking setting on the burst wizard. 3427 days ago 0
0
|
1 answers 1 asked |
|
If i put this in will it protect my gear box from a 11.1 volt lipo?
I really want to get a lipo battery but I don't want to break my gun so would it stop it and may it not burn out any of my gear box?
3431 days ago Howard E
0
0
(I have this same question)
Staff Answer:
It mainly depends on what airsoft gun you have. 3431 days ago 0
0
|
1 answers 1 asked |
|
Will this work on the SRC Ak beta?
Just wondering. I know it's not sold on ASGI unfortunately so I don't expect for you guys to know but if you do, it would definately be appreciated. :D
3433 days ago Angel C
0
0
(I have this same question)
Staff Answer:
If the connector is a small tamiya, then yes. 3430 days ago 0
0
Just wondering. I know it's not sold on ASGI unfortunately so I don't expect for you guys to know but if you do, it would definately be appreciated. :D
3433 days ago Angel C
0
0
(I have this same question)
Staff Answer:
If the connector is a small tamiya, then yes. 3430 days ago 0
0
|
2 answers 1 asked |
|
Will this fit in a buffer tube?
Will this fit In a mil-spec buffer tube?
3440 days ago Tyler Q
0
0
(I have this same question)
Staff Answer:
it should, however it depends on what battery you're using 3440 days ago 0
0
|
1 answers 1 asked |
|
Trigger contacts
Will it protect your trigger contacts like other mosfets?
3440 days ago Nazneen I
0
0
(I have this same question)
Staff Answer:
Only if it is hard wired into the gun 3440 days ago 1
0
|
1 answers 1 asked |
|
Will this fit in the g&g firehawk
I'm thinking of getting the g&g fire hawk and running it with a 11.1 so will this fit and does it offer lipo protection thanks
3444 days ago Anh Dao H
0
0
(I have this same question)
Staff Answer:
Yes this will fit. 3441 days ago 0
0
|
1 answers 1 asked |
|
will this protect my internals from lipo damage without hardwiring it? my gun is totally stock and isn't designated as "lipo re
Want to switch to lipo
3448 days ago casey b
0
0
(I have this same question)
Staff Answer:
No it will not protect your internals. It will prevent you from burning out your trigger contacts 3447 days ago 0
0
|
1 answers 1 asked |
|
how do you hardwire this mosfet into a dboys m4 wired to the rear?
Want to go lipo so looking to hardwire this in to my gun to protect my internals
3448 days ago casey b
0
0
(I have this same question)
Staff Answer:
It comes with instructions on how to do so 3447 days ago 0
0
|
1 answers 1 asked |
|
Will this fit an src
I have an src sr4 it is a model ge-0501
3456 days ago Bryce M
0
0
(I have this same question)
Staff Answer:
If you have enough room, it will work 3455 days ago 0
0
|
1 answers 1 asked |
|
which connector do i need
i have an src sr4 the model is a GE-0501
3457 days ago Bryce M
0
0
(I have this same question)
Staff Answer:
Most likely the small connectors 3455 days ago 1
0
|
1 answers 1 asked |
|
Has anyone had any problems using this with the vfc HK416 and a 9.6 1600 nunchuck? | 0 answers 1 asked |
|
What's wrong with my mosfet?
After the burst my gun would fire an extra 1-3 bbs, it wasn't doing that this morning. I disconnected it from my gun and pulled the trigger on auto and let go and no bbs came out. I plugged the Mosfet back in and it did it again, then it wouldn't do anything at all. I didn't do anything different then i usually do. I never spilled water on it or anything liquid. Any suggestions?
3460 days ago Daniel h
1
0
(I have this same question)
did they answer your question about your mosfet
3177 days ago
Ramon R
0
0
After the burst my gun would fire an extra 1-3 bbs, it wasn't doing that this morning. I disconnected it from my gun and pulled the trigger on auto and let go and no bbs came out. I plugged the Mosfet back in and it did it again, then it wouldn't do anything at all. I didn't do anything different then i usually do. I never spilled water on it or anything liquid. Any suggestions?
3460 days ago Daniel h
1
0
(I have this same question)
Staff Answer:
Please contact our sales department at 1(909)869-0671 3460 days ago 1
0
|
2 answers 2 asked |
|
Is the mosfet comparable with a 11.1v Lipo?
One of the feature the mosfet has is that it protects the gun from power surges. Will the 11.1v lipo set off the fuse. Also the mosfet doesn't do anything to re-route the transfer of electricity through the trigger contacts because of it's easy connect characteristics. So trigger arching will still be an issue correct?
3485 days ago julian l
0
0
(I have this same question)
Staff Answer:
It is a feature that has to be activated, and you should experience little or no arching if it was hardwired correctly 3483 days ago 0
0
|
1 answers 1 asked |
|
could it fit an elite force m4 cqb?
I recently just got an aeg so i could have a dmr,field,and cqb gearboxes and new barrels and i want different settings on the burst wizard and the crane stock isnt exactly big so
3497 days ago Jake D
0
0
(I have this same question)
Staff Answer:
It should be able to fit. 3496 days ago 0
0
|
1 answers 1 asked |
|
which one will work
Will this one work for the a&k Masada or do I need the large one? Also will this work with a g&g gr18 like?
3498 days ago David K
0
0
(I have this same question)
Staff Answer:
You will most likely need a the small connector. 3497 days ago 0
0
|
1 answers 1 asked |
|
Trigger Arcing | 0 answers 2 asked |
|
Can I Remove The Burst Function And Keep The Full Auto Function
I love all the features besides the burst
3506 days ago Jake D
0
0
(I have this same question)
Staff Answer:
Yes, it is possible to have semi and full auto with the Burst Wizard. 3504 days ago 1
0
|
1 answers 1 asked |
|
Will this fit a KM4
I have a KWA KM4, and an 11.1v lipo, would this fit? (The Lipo does not fit into the battery tube, it just sits directly on the inside of the butt plate). It is a tight fit just to fit my battery in, how much space does this take up? If there isn't enough room, I heard about hard wiring it into your AEG, how does that work, and how much would that cost? Would I be able to change settings after it is hardwired? Thanks!
3517 days ago Jacob D
0
0
(I have this same question)
Staff Answer:
This will easily fit inside the buffer tube with space left over. Hard wiring means opening the gearbox and soldering the gate wire to the contacts. This will allow you to have more settings. 3516 days ago 0
0
|
1 answers 1 asked |
|
Can you eliminate the burst to full auto delay completely?
I play a lot of CQB and like to have just full auto. Can I eliminate the delay?
3530 days ago Ryan K
0
0
(I have this same question)
Staff Answer:
Yes you can eliminate the delay. 3529 days ago 2
0
|
1 answers 1 asked |
|
Will this fit into an ics cxp16L? | 0 answers 1 asked |
|
Whhat would be the programming setup times for a Mil-Sim CYMA M14 SOCOM 16? | 0 answers 1 asked |
|
Am I able to replace my semi-auto with burst?
I would like to switch my semi-auto to burst whilst keeping my full auto selector.
3551 days ago River H
0
0
(I have this same question)
Staff Answer:
No, it will only replace the full auto function. 3551 days ago 0
0
|
1 answers 1 asked |
|
Can you disable the precocking function?
I have stock jg m4 internals and I don't want to fink them up!
3560 days ago David R
0
0
(I have this same question)
Staff Answer:
By default, the pre-cocking function is set to off. 3560 days ago 0
0
|
1 answers 1 asked |
|
If i add this to my gun, will i need a fuse anymore?
Title
3563 days ago Mitchell B
0
0
(I have this same question)
Staff Answer:
The fuse should not be needed. 3560 days ago 0
0
|
1 answers 1 asked |
|
is it small enough to fit in the battery well of an Ares TAR-21?
the Ares TAR-21 has a small well for the battery, will this be to cramped for all the components. or is there a lipo small enough to accommodate the space with the burst wizard.
3564 days ago Jesse V
0
0
(I have this same question)
Staff Answer:
I should fit with a small lipo. 3563 days ago 0
0
|
1 answers 1 asked |
|
Which should i choose small, or large tamiya connector?
I have a KWA CQR MOD 2, and would like to purchase one of these burst wizards, so I can have programmable fire modes on my gun, but one problem which type of connector fits the KWA CQR MOD 2 small, or large tamiya connector?
3564 days ago Susie G
0
0
(I have this same question)
Staff Answer:
Small Tamiya. 3564 days ago 0
0
|
1 answers 1 asked |
|
Will this protect my internals if i put a lipo battery into a gun
that's not lipo ready?
3573 days ago John U
1
0
(I have this same question)
Staff Answer:
This will protector your connectors, but your internals will still suffer more wear & tear than 9.6v NiMH or 7.4v Lipo. 3572 days ago 0
0
|
1 answers 2 asked |
|
Does this only change the full auto function?
Can I only change the full auto function to burst function or can I change the other functions (semi auto, etc.) instead of the full auto function?
3574 days ago Danton N
0
0
(I have this same question)
Staff Answer:
This product should only change the full auto function. 3573 days ago 0
0
|
1 answers 1 asked |
|
could this fix my full auto issue?
I have a matrix m4 and it started firing full auto randomly when the battery gets connected and i was wondering if this mosfet could fix the problem cause it controls the power sent to the motor or something... idk
3574 days ago Gregory W
0
0
(I have this same question)
This could help, but check your wires to make sure they are all connected correctly or frayed.
3140 days ago
Ryan D
1
0
|
1 answers 1 asked |
|
Can i use this on a Magpul Masada?
Can i use this on a Magpul Masada? Since it has a micro swtich.
Thanks.
3574 days ago Kevin L
0
0
(I have this same question)
Staff Answer:
This should work. 3574 days ago 0
0
|
1 answers 1 asked |
|
Will this work with 9.6v 2000MaH NiMh bat?
I have a 9.6v 2000MaH NiMh battery and am wondering if this will work
3578 days ago Anthony G
1
0
(I have this same question)
Staff Answer:
The Burst Wizard is meant to be used with any type of battery and should not have any issues with this one. 3577 days ago 0
0
|
1 answers 1 asked |
|
Does it protect the wires?
So i'm not really familiar with mosfets and recently I got two 2200 mah 20c lipos for RC and they burnt up my wires, so can I use this to protect my wires and still use the lipos i have?
3580 days ago Keaton C
0
0
(I have this same question)
Staff Answer:
This product should be able to protect your gearbox and wires okay. 3580 days ago 0
0
|
1 answers 1 asked |
|
Will it work with a microswitch trigger
My gun has a micro switch trigger in it. Will this product work with it? I have an elite force m4 cqb
3581 days ago John H
0
0
(I have this same question)
i believe so and i too have and elite force m4 cqb
3497 days ago
Jake D
0
0
My gun has a micro switch trigger in it. Will this product work with it? I have an elite force m4 cqb
3581 days ago John H
0
0
(I have this same question)
Staff Answer:
This should work with the King Kong Mosfet unit. 3580 days ago 0
0
|
2 answers 2 asked |
|
Can I put this mosfet into another mosfet?
Well i have a A&K Masada and i put a mosfet on it to replace the stock connections to prevent bad arc-ing. Now i see that the burst wizard can do alot of things but i already have a basic mosfet. So can i still put this on my acr?
3589 days ago Christopher P
0
0
(I have this same question)
Staff Answer:
That configuration may cause problems for the gun, and is not recommended by ASGI. 3587 days ago 0
0
|
1 answers 1 asked |
|
Is it really worth $37?
I've been manually burst firing ever since my first AEG years ago. is it really worth almost $40 just for an attachment that just dose it for me?
3590 days ago David M
0
0
(I have this same question)
This is a programmable device, you can have custom settings as opposed to just three round.
2680 days ago
Luke R
1
0
I've been manually burst firing ever since my first AEG years ago. is it really worth almost $40 just for an attachment that just dose it for me?
3590 days ago David M
0
0
(I have this same question)
It will make your gun last longer and also ultimately up the performance i think it's actually a good deal!
3372 days ago
James E
1
0
I've been manually burst firing ever since my first AEG years ago. is it really worth almost $40 just for an attachment that just dose it for me?
3590 days ago David M
0
0
(I have this same question)
It's not just a burst function. It's a "smart" mosfet. The burst is just a feature added to it, along with other things.
3586 days ago
Gabriel S
2
0
|
3 answers 1 asked |