Madbull Daniel Defense 14.5" Lightweight Profile Outer Barrel (Black)
[Y01A03B][07924 / MB OTB DD CAR 14.5 LIGHT]Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
The Madbull Daniel Defense 14.5" Lightweight Profile Outer Barrel is cold hammer forged from high quality metal and features fully licensed trade marks and engravings. The make, caliber and rifling of the barrel are all beautifully engraved on this barrel and add to the overall look and realism. Unlike some lesser outer barrels, the Madbull Daniel Defense outer barrel is made with extremely tight tolerances to ensure maximum barrel stability. The fit and finish of this barrel easily surpasses low quality barrels that you might find in most clone AEGs, if you are looking for a outer barrel that looks great and functions perfectly then this barrel will definitely fit the bill.
Specifications:
Manufacturer: Madbull
Length: 14.5"
Color: Black
- Specifications
- Manufacturer: Madbull Airsoft
Bought this barrel for my G&G M4 Raider mostly because i liked the profile and wanted to get rid of the stock front end sight post that was fixed to the stock two piece barrel. Install on the other hand was more difficult that i had anticipated (not that i was expecting a perfect fit from the get go). The base of this outer barrel is wider than the stock one and took some time dremeling out the threaded barrel lock to fit this barrel and then had to rig a support for the front end of my stock RIS so the barrel stays firm in place (Black electrical tape for now until i can make an appropriate brace). Also had to widen the slots in my upper receiver (good thing it was plastic) to accommodate the new barrel. All said and done the profile of this barrel fit my desires for the look i was going for and the threaded tip made affixing my mock suppressor easier since i didn't have to figure out how to thread the stock outerbarrel.
Pros:
Lightweight (compared to stock)
No sight post
Already threaded
Makes the gun look better (in my opinion)
Cons:
Took a little bit of work but not really any to knock it down because i knew it wouldn't be a perfect fit (~8 hours of sanding of stock barrel lock to fit)
When i got rid of the stock RIS and everything else on my G&G GR-15 CQB, i wanted a more field looking gun rather than CQB. plus i had to do my math also cause i had some paranoid thoughts on my longer inner barrel and the mock suppressor standing out there and one error by myself could break the supressor and bend my miracle barrel. So I measured and come to conclusion that the 14.5" would make it perfect for what i needed.. and not worry about it.
Pros:
Very stable and has a snug fit (both pro and con)
easy to install if your rail is aftermarket..
Cons:
is a sung fit but can also be a good thing for being sturdy..
other than that no other cons that are present at the time..
Fits my VFC perfectly, was somewhat easy to install
Pros:
Cons:
|
Will it fit an HK G36
HK G36
2128 days ago Isaac W
0
0
(I have this same question)
Staff Answer:
No, this is for M4/M16 style rifles. 2128 days ago 0
0
|
1 answers 1 asked |
|
Restock
When is this item going to back in stock?
3239 days ago Liz B
0
0
(I have this same question)
Staff Answer:
We have no ETA at this time 3239 days ago 0
0
|
1 answers 1 asked |
|
inner barrel
Will a 365mm inner barrel fit
3249 days ago Jacob G
0
0
(I have this same question)
Staff Answer:
Yes. 3248 days ago 0
0
|
1 answers 1 asked |
|
looks | 0 answers 2 asked |
|
Will it fit Kwa Km4 Commando
Will it fit my KWA KM$ commando
3388 days ago helen f
0
0
(I have this same question)
Staff Answer:
It should 3386 days ago 0
0
|
1 answers 1 asked |
|
Compatibility
I wold like to know if this would fit on Airsoft GI's Custom Polar Star Hunter Desert Carbine Airsoft Gun
3416 days ago Gabe D
0
0
(I have this same question)
Staff Answer:
It should 3415 days ago 0
0
|
1 answers 1 asked |
|
Compatibility
Will this work on the Combat Machine M16 with blow back that you sell?
3517 days ago Jeremy S
0
0
(I have this same question)
Staff Answer:
It should 3517 days ago 0
0
|
1 answers 1 asked |
|
width
How wide is the tip
3527 days ago brandon j
0
0
(I have this same question)
Staff Answer:
It should have 14mm CCW threads 3524 days ago 0
0
|
1 answers 1 asked |
|
will it fit
Will it fit on a D Boy Full Metal M4 RIS
3527 days ago brandon j
0
0
(I have this same question)
Staff Answer:
It should 3524 days ago 0
0
|
1 answers 1 asked |
|
will this fit
will this fit my APS Guardian because i have bought this and I am having trouble putting this in.
3542 days ago Connor W
0
0
(I have this same question)
Staff Answer:
It should fit as long as it is an M4 platform 3542 days ago 0
0
|
1 answers 1 asked |
|
Would it fit
Would it fit a M4 Raider and is it easy to install? Also, what is it made out of? Aluminum or steel?
3561 days ago Clayton M
0
0
(I have this same question)
Staff Answer:
It should be able to fit, and it should be made from aluminum 3561 days ago 0
0
|
1 answers 1 asked |
|
Inner barrel
How long of a inner barrel will fit the outer barrel?
3581 days ago Ryan S
0
0
(I have this same question)
Staff Answer:
this barrel would use a 363mm inner barrel 3580 days ago 0
0
|
1 answers 2 asked |
|
Will it fit
Will this fit a kwa lm4 pts?
3609 days ago Richard S
0
0
(I have this same question)
Staff Answer:
No, the LM4 has its own proprietary barrel 3609 days ago 0
0
|
1 answers 1 asked |
|
Will it fit?
Will this fit the Echo 1 TROY MRF-X AEG Airsoft Gun with a 363mm inner barrel?
3622 days ago Jared M
0
0
(I have this same question)
Staff Answer:
This outer barrel should fit with that gun. 3622 days ago 0
0
|
1 answers 1 asked |
|
Kwa sr7
Can this fit on a kwa sr7
3634 days ago kelly P
0
0
(I have this same question)
Staff Answer:
It should fit. 3631 days ago 0
0
|
1 answers 1 asked |
|
threads
is it ccw or cw
3642 days ago Ahmed M
0
0
(I have this same question)
Staff Answer:
14mm CCW. 3640 days ago 0
0
|
1 answers 1 asked |