Airsoft GI small logo

Madbull Noveske 10" M4/M16 RIS (Black)

[X05D09][03707 / MB FFHG 10 / NRH02]
$106.70
( 2 Reviews ) ❤ Add to Wishlist
OUT OF STOCK
Orders over $179 qualify for free shipping
Free Shipping for orders over $179 No Coupon needed
New to airsoft? Here are some safety tips for airsoft guns that we recommend following.

Description:
This Madbull Noveske 10" Rail Unit is a licensed RIS from Noveske Rifleworks. Madbull has always been a company dedicated to excellence, which is why they take the extra step to make the best quality built and looking airsoft accessories available. If you want a unique looking RIS then look no further than the Madbull Noveske.

Airsoft Noveske RIS

Specifications
Manufacturer: Madbull Airsoft

see 2 reviews | Write a Review
verified buyer
B. GREENE | 2008-07-07
this is a great ris!! i got this for my ca m15 spc and it fits totaly flush with the upper reciver even lighter then the CA ris. gives it the hk 416 look and its a real steel replica noveske.com.
verified buyer
J. ARVAY | 2009-03-06
Product Information:
I installed this rail on my KWA M4 for the mid-lenght RIS look, but it was a little tricky to get on.
For those of you who have yet to install this rail..

-The rail doesn't have room for a fuse inside of it, so if your gun is front wired and has a fuse, you're going to have to remove that and just replace the fuse with 16 or 18 gauge wire.

-Please! (this is the mistake I made) Pay attention to getting the holes on the replacement delta-ring lined up, and don't just tighten it. I forgot to do this and had a heck of a time unscrewing the delta-ring a little to get it lined up.

-You may want to use a small amount of powdered graphite or oil as a lubricant to help you get the delta ring on.

Pros:
-Very sturdy. This thing is a rock-solid unit.

-Finish looks good.

-It's a pretty skinny rail, not like the Mad Bull "Dragon Fire" rail at all. It's maybe about 2.5 inches to 3 inches wide from the bottom to the top, and about 2-2.5 inches wide.

-Fits KWA guns! (you may have to use a hex wrench, or something that does the same job, to get enough torque to turn it near the end.)

-It lines up perfectly with the rail on my M4's upper. This isn't some cheaply machined and cheaply spec'd knock-off rail at all.

-

Cons:
-None.
 
lm4c
will this fit on an lm4c

3178 days ago
robert l
0
0

(I have this same question)
Staff Answer:
It should

3177 days ago
0
0
1 answers
1 asked
 
Will this fit on a vfc body, specifically a pr-15?
It has a 14.5 inch barrel with the flip up sight on the putter barrel. I would be removing the flip up sight.

3234 days ago
Patricia B
0
0

(I have this same question)
Staff Answer:
Yes

3177 days ago
0
0
1 answers
1 asked
 
fit
will this fit my Krytac CRB

3248 days ago
Talisen S
0
0

(I have this same question)
Staff Answer:
It should

3246 days ago
0
0
1 answers
1 asked
 
WIll this fit on Tippmann's M4 Carbine 0 answers
1 asked
 
CAA/king arms?
does this fit my CAA/king arms m4?

3384 days ago
Christian S
0
0

(I have this same question)
Staff Answer:
It should

3378 days ago
0
0
1 answers
1 asked
 
fit
will this fit the combat machine m4-a1 carbine?

3391 days ago
William W
0
0

(I have this same question)
Staff Answer:
You will need to remove the front iron sight

3387 days ago
0
0
1 answers
1 asked
 
fit
I have a kwa sr10, can i still fit my gas tube into the upper receiver with this ris?

3512 days ago
Joshua R
0
0

(I have this same question)
Staff Answer:
It should be able to

3512 days ago
0
0
1 answers
1 asked
 
Magpul Full Metal MOE 11.5" CQB
Will the rail fit this gun without the G&P barrel nut?

3518 days ago
Michael N
0
0

(I have this same question)
Staff Answer:
If the gun is a G&P you will need the G&P barrel nut

3515 days ago
0
0
1 answers
1 asked
 
lm4
Will it fit and does it come with barrel nut

3528 days ago
Colby M
0
0

(I have this same question)
Staff Answer:
It should fit and come with the barrel nut

3525 days ago
0
0
1 answers
1 asked
 
KWA SR10
I was looking to see if I still need the original delta ring from my rail system or does this come with a nut or something of the sort like the madbull troy RIS systems use to create a flush look to the upper receiver.

3534 days ago
Joshua R
0
0

(I have this same question)
Staff Answer:
This does not require the Delta Ring

3533 days ago
0
0
1 answers
1 asked
 
Weight 0 answers
1 asked
 
Installation
Can you install this for me at the walk in store?

3543 days ago
Angeluz G
0
0

(I have this same question)
Staff Answer:
There will be a labor fee. But it's best if you just show up to the store and just ask our staff over there.

3540 days ago
0
0
1 answers
1 asked
 
Fit
Will this fit a kwa sr10

3543 days ago
Angeluz G
0
0

(I have this same question)
Staff Answer:
It should

3543 days ago
0
0
1 answers
1 asked
 
elite force 4crs
Will it be a direct bolt on, or will it require modification?

3547 days ago
Eddymir L
0
0

(I have this same question)
Staff Answer:
Modification may be required

3547 days ago
0
0
1 answers
1 asked
 
will it fit on a G&G GR16 combat machine?
i just wanted to know because my M4 isnt the type with a delta ring

3549 days ago
Greg S
0
0

(I have this same question)
Staff Answer:
It will most likely not fit if you have a 14.5 inch barrel with a front triangle sight

3549 days ago
0
0
1 answers
1 asked
 
Can you install this for me?
I want this rail on my kwa cqr mod 2 because I want the "honey badger" look. Could you guys install it if I buy it? Thanks.

3577 days ago
Jeremy W
0
0

(I have this same question)
Staff Answer:
We could with out tune up / repair service, however there is no suppressor, aside from the Gemtech Outback that will fit inside of that rail system

3577 days ago
0
0
1 answers
1 asked
 
What is the weight of this RAS 0 answers
2 asked
 
will this fit a g&p woc gbb?
I want this rail because it seems like I still have my mock gas tube vs. The mad bull dd 9" lite rail .

3615 days ago
Noel M
0
0

(I have this same question)
Staff Answer:
It will not, you will need and adapter for any G&P gun.

3613 days ago
0
0
1 answers
1 asked
 
fit on combat machine
will this rail fit on a combat machine shorty

3640 days ago
Jane L
0
0

(I have this same question)
Staff Answer:
It should fit.

3640 days ago
0
0
1 answers
2 asked
 
Room for imitation has tube?
Does this have room for an imitation gas tube found on a G&G Top Tech Gun?

3644 days ago
Russ L
0
0

(I have this same question)
Staff Answer:
This should have room for that.

3644 days ago
0
0
1 answers
1 asked
 
Whats the inner diameter of this rail?
im hoping i could put a mock suppressor inside, so if theres a specific one that happens to be a perfect fit that would help too.

3644 days ago
Gregory M
0
0

(I have this same question)
I have read online that it will fit a silencer with a diameter of 30mm. The inner diameter of the rail is something like 1.3"

3632 days ago
Alexander B
0
0
1 answers
2 asked
 
Will this fit?
Can it fit on the KWA LM4 GBBR?

3689 days ago
Logan F
0
0

(I have this same question)
Staff Answer:
Yes, this should work.

3689 days ago
0
0
1 answers
1 asked
 
How sturdy is this rail?
From what I have heard, this rail bolts on to a new ring that is tightened onto the upper receiver. If this is the case, then what is keeping this rail from just twisting itself off or un-aligning? I have seen many G4's with them, which is what I have, and want to make sure it is reliable. Thank you

3690 days ago
Lucas s
0
0

(I have this same question)
Staff Answer:
Usually a dab of locktite can fix any twisting issues, but these rails will usually fit pretty tightly.

3690 days ago
0
0
1 answers
1 asked
 
Will this rail fit on a KWA CQR mod 1?
i really want a great sturdy rail platform for my KWA mod 1 and I want this one. Please tell me if it will fit my gun.

3694 days ago
Will A
0
0

(I have this same question)
Staff Answer:
This rail should be able to fit on the CQR. You will need to remove the delta ring however, which may require the delta ring removal tool.

3694 days ago
0
0
1 answers
1 asked
Search Tags: External Accessories RAS Metal Hand Guard Licensed Rail M4 M16

For Questions, Answers and Comments:

Talk about the Madbull Noveske 10" M4/M16 RIS (Black) with your friends on the facebook comments box below:
Copyright © 2024 Airsoft GI
Disclaimer:

All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.

Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.

By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.