Madbull Gemtech "Blackside" Barrel Extension (Tan)
[03476 / MB BE BS TAN]
OUT OF STOCK
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
The Blackside is one of the latest barrel extensions released from Mad Bull Airsoft under license with Gemtech of Boise, ID. Gemtech has long been known for the quality of their silencer designs and have been in use with numerous branches of law enforcement and the armed forces. The Blackside will fit on most airsoft guns with a 14mm counter-clockwise thread. Each barrel extension is constructed from high tensile strength aluminum and engraved with licensed Gemtech trademarks. This barrel extension is an excellent choice to disguise an extended inner barrel while keeping the weight on the front end down.
Specifications:
Length: 155mm (6.10")
External Diameter: 35mm (1.37")
Thread Type: 14mm Counter-Clockwise
Thread Position: The edge of the barrel extension
Recommended fit: M4, M16, AUG, SCAR, MK36, MK5
Color: Tan
Features:
Extra Light Weight
High Tensile Strength Aluminum
Licensed by Gemtech
Please Note:
The Mad Bull barrel extensions have no suppressive ability.
- Specifications
- Manufacturer: Madbull Airsoft
see 4 reviews
| Write a Review
verified buyer
verified buyer
verified buyer
verified buyer
D. MILSOM
|
2010-04-14
Product Information:
Better than I expected. I picked up a VFC SCAR-L in tan last year (which I love and highly recommend) that I have mounted an EOTech 552, Rico vertical flashlight grip, and a Noveske KX3 - all in black, so this year I'm going tan for the external pieces and this was my first.
I had the stock "standard" outer barrel with the KX3 on the end which looked bad a$$ but I wanted to go CQC so I tossed the outer barrel, dropped in the short inner barrel and put the KX3 on the end. It looked pretty good just a little short so I picked this suppressor up to compensate for an extra 4" or so and it's PERFECT! Longer than the Noveske but shorter than the standard length barrel. The "Blackside" IMO is the perfect length, it's nice and fat - it looks really mean, the tan shade is an acceptable match the the VFC SCAR-L and really just looks great. If this type of scenario is what your going for click "buy now" before they got on back-order.
Pros:
Perfect length
Nice and fat
Has a serious genuine heavy feel
Paint job feels and looks mint
Laser etching is spot on
Theading was perfect, almost feels impossible to cross-thread
Cons:
Would have been nice to have the trademarkings on both sides
Honestly, that's it
Better than I expected. I picked up a VFC SCAR-L in tan last year (which I love and highly recommend) that I have mounted an EOTech 552, Rico vertical flashlight grip, and a Noveske KX3 - all in black, so this year I'm going tan for the external pieces and this was my first.
I had the stock "standard" outer barrel with the KX3 on the end which looked bad a$$ but I wanted to go CQC so I tossed the outer barrel, dropped in the short inner barrel and put the KX3 on the end. It looked pretty good just a little short so I picked this suppressor up to compensate for an extra 4" or so and it's PERFECT! Longer than the Noveske but shorter than the standard length barrel. The "Blackside" IMO is the perfect length, it's nice and fat - it looks really mean, the tan shade is an acceptable match the the VFC SCAR-L and really just looks great. If this type of scenario is what your going for click "buy now" before they got on back-order.
Pros:
Perfect length
Nice and fat
Has a serious genuine heavy feel
Paint job feels and looks mint
Laser etching is spot on
Theading was perfect, almost feels impossible to cross-thread
Cons:
Would have been nice to have the trademarkings on both sides
Honestly, that's it
verified buyer
C. NELSON
|
2010-07-14
Product Information:
got this thing for my pws diablo and all i have to say is WOW. pretty sure this thing is just a bored out solid piece of aluminum its got that much heft to it, also looks just mean on my diablo and my 1911 MEU.
Pros:
great construction
sturdy
heft
pretty sick trademarks
I got the lat one in stock!
Cons:
none
got this thing for my pws diablo and all i have to say is WOW. pretty sure this thing is just a bored out solid piece of aluminum its got that much heft to it, also looks just mean on my diablo and my 1911 MEU.
Pros:
great construction
sturdy
heft
pretty sick trademarks
I got the lat one in stock!
Cons:
none
verified buyer
C. HANLEY
|
2010-09-05
Product Information:
this is an awsome barrel extension. it doesnt do much but if your looking for the stelth/SOCom look ..... well this it the thing to finish the look.
Pros:
CCW(counter clock-wise)
TAN also comes in Woolland green and black
great look and finish
durable
Cons:
none other than it doesnt accutually suppress but i knew that before i bought it. there are very few guns that actually do suppress anyways.
this is an awsome barrel extension. it doesnt do much but if your looking for the stelth/SOCom look ..... well this it the thing to finish the look.
Pros:
CCW(counter clock-wise)
TAN also comes in Woolland green and black
great look and finish
durable
Cons:
none other than it doesnt accutually suppress but i knew that before i bought it. there are very few guns that actually do suppress anyways.
|
|
Will this fit on a elite force m4 cqc gen 4 | 0 answers 1 asked |
|
|
Foam
Does one of the ends screw off so you could fill it with foam?
3702 days ago Nick C
1
0
(I have this same question)
Staff Answer:
It should not 3699 days ago 0
0
|
1 answers 1 asked |
|
|
pistol
will this fit on a side arm
4015 days ago Lorraine M
0
0
(I have this same question)
Staff Answer:
If it has 14mm CCW thread 4013 days ago 0
0
|
1 answers 1 asked |
|
|
Echo 1 XCR-C
Will this fit the Echo 1 XCR-C?
4024 days ago Christian F
0
0
(I have this same question)
Staff Answer:
It should 4007 days ago 0
0
|
1 answers 1 asked |
|
|
Barrel Extension | 0 answers 1 asked |
|
|
will the bbs feed out on my kwa lm4c? | 0 answers 1 asked |
|
|
Would this work on a G&G M4 Combat Machine? | 0 answers 1 asked |
|
|
Barrel
If i put this on my gun, would I need to get a longer barrel as well?
4131 days ago Jacob B
0
0
(I have this same question)
Staff Answer:
it is suggested so that the BB does not ricochet inside the barrel extension. 4131 days ago 0
0
|
1 answers 1 asked |
|
|
Flash hider
Do i need a different flash hider and if so where can i get it.
I'm going to put this on my combat machine
4199 days ago Josh P
0
0
(I have this same question)
Staff Answer:
This threads in place of a a flash hider 4196 days ago 0
0
|
1 answers 1 asked |
|
|
Flash hider
Im getting this for my combat machine and i was wondering if i need a different flash hider.
4199 days ago Josh P
0
0
(I have this same question)
Staff Answer:
This threads in place of a flash hider 4196 days ago 0
0
|
1 answers 1 asked |
|
|
Will this Work With a G&G Combat Machine MK18 MOD1
Will this Be Able to fit a G&G Combat Machine MK18 MOD1
4202 days ago Charlene S
0
0
(I have this same question)
Yes
4078 days ago
Andre T
0
0
Will this Be Able to fit a G&G Combat Machine MK18 MOD1
4202 days ago Charlene S
0
0
(I have this same question)
Staff Answer:
As long as your gun has 14mm counter clockwise threads 4201 days ago 0
0
|
2 answers 1 asked |
|
|
Will this work with a G&G Combat Machine CM16 MOD0
4218 days ago marti m
1
0
(I have this same question)
Staff Answer:
It should be able to fit 4216 days ago 0
0
|
1 answers 1 asked |
|
|
Would this fit a VFC 416?
I have a elite force VFC 416, and I want to get a longer tight bore barrel in it.
4237 days ago Zachery J
0
0
(I have this same question)
This extension will fit in the VCF 416. Ads long as you unscrew the flash hider
4168 days ago
Anthony M
0
0
I have a elite force VFC 416, and I want to get a longer tight bore barrel in it.
4237 days ago Zachery J
0
0
(I have this same question)
Staff Answer:
It should fit any guns with 14mm counter clockwise threads. 4237 days ago 0
0
|
2 answers 1 asked |
|
|
Will it work on a kwa m4
Will it work on the KWA CQR mod 1
4243 days ago John M
0
0
(I have this same question)
Staff Answer:
Yes, it should work 4242 days ago 0
0
|
1 answers 1 asked |
Search Tags: 14mm CCW M4 Cosmetic Mock Suppressor Mock Fake Suppressor Silencer Barrel Extension Extender Can
