Airsoft GI small logo

Airsoft GI DMR Upgrade Package

[00154 / POUPGRADE2]
Discontinued
This item qualifies for free shipping
Free Shipping for orders over $179 No Coupon needed
New to airsoft? Here are some safety tips for airsoft guns that we recommend following.

Specifications:
Muzzle Velocity: 470FPS - 500FPS (Airsoft GI does not guarantee FPS, the range given is meant to be used as a guideline not an exact measure)
Materials Used: M150 Spring, Metal Bushings, 6.03mm Precision Inner Barrel, Hop Up Bucking, POM Piston, Torque Up Gear Set, Ball Bearing Spring Guide, Cylinder, Aluminum Cylinder Head, Aluminum Piston Head, High Torque Motor
Exclusions: SR25, SVD, PSG-1, FAMAS, TAR-21, PTS Masada
Note: TM M14 and Clone TM M14s will require an additional labor surcharge of $30 to cover the cost of more expensive gears.

Please Note:
  • We require about 10 business days to complete service requests. Be advised, this is an estimated time only; some jobs may finish sooner or require more time.
  • Service fee only applies to a single (1) airsoft gun.
  • Repair work may take longer than 10 business days to diagnose and repair.
  • If you will be shipping your airsoft gun for service, we recommend that you contact us beforehand regarding any special request, to answer any questions and provide shipping instructions. Please call (909) 869-0671 during business hours of 9am to 5:30pm (PST), Monday to Friday, and speak with either a Sales or Customer Service Representative.
  • Return shipping is a separate charge that is calculated during checkout, it is not included in the service fee.
  • There will be a $25 service charge for request to cancel any upgrades, tune ups and/or repairs where the Technician has already begun work. Meaning the Technician has already performed dis-assembly and/or accessed the gearbox of the airsoft gun. No exceptions.
  • 45 day limited warranty on all work performed by Airsoft GI Technicians.

    Helpful Battery Note:
    350FPS: 9.6V 600mah or above
    400FPS: 9.6V 1500mah or 8.4V 2000mah or above
    450FPS: 9.6V 2000mah or above
Specifications
Manufacturer: Airsoft GI
see 3 reviews | Write a Review
C. WHALEY | 2008-02-07
If I were on an actual computer I would've emailed ASGI, but I am on my PSP. I just wanted what brands you think ASGI would do this upgrade for. I am a proud owner of a JG M16a4 and need it at 400 fps at least with a .25g bb. I will also be giving it a G&P Zombie Killer metal body. If ASGI cannot upgrade my JG I will simply do it myself!
D. TOLLIS | 2008-02-22
To upgrade your JG you would need a lot more things than listed on here, I would just get a systema m150 gearbox to get the power level you want. Besides, your gearbox would split in half before a full mag was shot through if you were using the stock JG gearbox.
Z. TAGGART | 2019-07-17
Product Information:
I sent in a SL9. It had feeding issues and was shooting 320-340 with .28s. I requested it shoot under 2.32 joules with .32s or under 395fps with .32. The tech hit that mark right on!

Pros:
Gun shoots what I requested.
They R-hopped it.
Gun is really quiet.
Kept me up-to-date on what was going on with the gun.
I did put aftermarket parts in the gun and most, if not all were sent back to me with the gun.

Cons:
It cost me alot to ship my gun out. (live on eastcoast)
It took over a month from shipping it out and receiving it back. I dont put that on the tech, the communication between customer service and I was slow. Emails were sent and there were delay responses.
I dont know exactly everything that was done with the gun.
 
FPS?
is there a part that will allow me to change FPS mid game?

2110 days ago
Carl D
0
0

(I have this same question)
Staff Answer:
Some guns have quick change springs that can let you change FPS, but even then, it wouldn't be something you could do on the field.

2109 days ago
0
0
1 answers
1 asked
 
Where is this available
Is this service only available in the store in California or can this be done at any ASGI store?

2223 days ago
Jaxon T
0
0

(I have this same question)
Staff Answer:
You should be able to have any upgrade package installed at any ASGI store. Please call the store you would like to have your gun serviced at for availability of parts.

2175 days ago
0
0
1 answers
1 asked
 
can you do this on an ak 47
ak 47

3227 days ago
ethan t
0
0

(I have this same question)
Staff Answer:
Please contact our customer service for assistance.

3174 days ago
0
0
1 answers
1 asked
 
CM032a M14
Could I get this upgrade for the CM032A M14 socom 16?

3263 days ago
David D
0
0

(I have this same question)
Staff Answer:
You could. Please contact our customer service for more information regarding that package.

3244 days ago
0
0
1 answers
1 asked
 
Why the ball bearing Spring guide? 0 answers
1 asked
 
Kwa sr10 and installation
Will these parts fir my gun and how much to have airsoft gi put this together

3359 days ago
Cameron T
0
0

(I have this same question)
Staff Answer:
Please contact our customer service for assistance

3357 days ago
0
0
1 answers
1 asked
 
fps for .28 or higher gram bb's 0 answers
1 asked
 
Will a echo 1 M16 DMR work for this upgrade?
I have a stock echo 1 m16 DMR enhanced edition, and I was wondering if the upgrade will work for this gun

3389 days ago
Rafael M
0
0

(I have this same question)
Staff Answer:
It should

3386 days ago
0
0
1 answers
1 asked
 
Barrel length
How long is the inner barrel and would these upgrades be compatible if I decided to put a mock suppressor on my guy. (Krytac trident SPR M4)

3395 days ago
Jakob R
0
0

(I have this same question)
Staff Answer:
It matches whatever barrel you need

3394 days ago
0
0
1 answers
1 asked
 
I have a dboys m4 full metal. Can this gun get the dmr upgrade? 0 answers
1 asked
 
Would this upgrade work for KWA M4?
Looking for my new M4 to get 450+ fps, would this upgrade work on that gun?

3429 days ago
Justin W
0
0

(I have this same question)
Staff Answer:
Please contact our customer service for details

3429 days ago
0
0
1 answers
1 asked
 
M14
Is the CYMA M14 compatible with this?

3430 days ago
Marcella M
0
0

(I have this same question)
Staff Answer:
It should be, please contact our customer service for details

3429 days ago
0
0
1 answers
1 asked
 
ASG SA58
Granted it is a new gun, I don't see it on the exclusions list..so I am assuming it is alright for this to be sent in for upgrades. Is my assumption correct?

3435 days ago
Jake F
0
0

(I have this same question)
Staff Answer:
Please contact our customer service for details

3435 days ago
0
0
1 answers
1 asked
 
will this work for the ca25?
Im trying to get my old team back together and i want something that i can shoot a good 300 feet down range but i don't want to buy a gas sniper.

3488 days ago
tre f
0
0

(I have this same question)
Staff Answer:
Please contact our customer service for details

3485 days ago
0
0
1 answers
1 asked
 
KMP basic
would this upgrade package work on a KMP basic? I want a good 200+ foot range DMR.

3503 days ago
Kyle E
0
0

(I have this same question)
Staff Answer:
Please contact our customer service for details.

3499 days ago
0
0
1 answers
1 asked
 
What about the gr-25
Gr-25 has a regular v2 gear box. Will the regular package be ok

3513 days ago
Victoria F
0
0

(I have this same question)
Staff Answer:
Please contact our customer service department for details

3513 days ago
0
0
1 answers
1 asked
 
KMP basic? 0 answers
1 asked
 
Dmr
Will this package remove the ability to use full auto?

3532 days ago
Sal G
0
0

(I have this same question)
Staff Answer:
You will need to request that

3531 days ago
0
0
1 answers
1 asked
 
International Shipping
If I bought a DMR on the site and had it upgraded would it still get by the Canada and USA Border without being seized due to its high FPS?

3533 days ago
Ferrin C
0
0

(I have this same question)
depends, if it shoots just under 500fps when the asgi tests it and when the border tests it than the gun will cross, you could however request for asgi to put the stock spring back in the gun after upgrading and ship the high powered m150 spring in the same box but out of the gun. if you do this then it will most likely shoot between 366-500fps and will cross with no problem, or you could get a firearms license that way you can get any gun no matter what the fps is and as long as you provide the cbsa with a scan or photocopy of your firearms license through your local cop shop.

3527 days ago
dwayne r
0
0
1 answers
1 asked
 
KWA SR-10
Will you upgrade a KWA SR-10

3548 days ago
David S
0
0

(I have this same question)
Staff Answer:
Yes we can

3547 days ago
0
0
1 answers
1 asked
 
What would the approximate rate of fire be with those mods
With those mods on a kwa sr10 what would be the approximate rate of fire

3556 days ago
Logan N
0
0

(I have this same question)
Staff Answer:
If you are making a gun a DMR, fields will not allow a gun of this FPS to shoot full auto, so it should not matter as this is designed to make the gun shoot hard and in semi auto

3555 days ago
0
0
1 answers
1 asked
 
Custom Order?
Is there any way for me to get a custom order?

3573 days ago
Stephanie C
0
0

(I have this same question)
Staff Answer:
Please call our customer service department at 1(909)869-0671 for details

3570 days ago
0
0
1 answers
1 asked
 
can you upgrade to a slightly lower fps?
my local Airsoft group only lets non bolt action up to ~420fps. could you upgrade this gun so it only averages 420 and not 450fps (.20)? http://www.airsoftgi.com/product_info.php?cPath=139_24_107&products_id=6510

3602 days ago
andrew g
0
0

(I have this same question)
Staff Answer:
The Airsoft Gun you linked already shoots are 400 FPS which is just right according to your statement.

3602 days ago
0
0
1 answers
1 asked
 
If I already have some parts.
I have just recently put in a 6.03mm madbull barrel. Also many of the internal parts are already metal. Will having these parts on the gun lower the price of this service?

3622 days ago
Neil C
1
0

(I have this same question)
Staff Answer:
I would recommend calling into our sales dept. at 1(909)869-0671 PHONE HOURS: 09:00-17:30 PST (M-F)

3622 days ago
0
0
1 answers
2 asked
 
If i get a gun and the service at the same time, could you upgrade the gun before sending it to me
could you install the upgrades before sending it to me, or would i have to buy the gun and then send it back

3627 days ago
Amro H
0
0

(I have this same question)
Staff Answer:
We should be able to service it before it goes out. Please contact our customer service line for more info on this process:<br><br> CUSTOMER SERVICE: 1(909)869-0671 PHONE HOURS: 09:00-17:30 PST (M-F)

3625 days ago
0
0
1 answers
1 asked
 
SR25?
I would love to sent in my SR25, but I see it is excluded from most of your packages. Why???

3629 days ago
Nick W
0
0

(I have this same question)
Staff Answer:
Reason being is because the SR25 uses different components. If you contact our customer service, we can still do a custom DMR package / tech work for you. 909 869 0671

3628 days ago
0
0
1 answers
1 asked
 
what brands do you use for each part?
what brands do you use for that part and if different for certain parts which ones and what brands?

3650 days ago
nicole c
0
0

(I have this same question)
Staff Answer:
It depends on demand. If you have a preference, please contact our customer service:<br><br> CUSTOMER SERVICE: 1(909)869-0671 PHONE HOURS: 09:00-17:30 PST (M-F)

3650 days ago
0
0
1 answers
1 asked
 
Extend outer barrel
Will I have to pay extra if I need an outer barrel extension also or does it come with an outer barrel

3651 days ago
Joshua L
0
0

(I have this same question)
Staff Answer:
An extended outer barrel will cost extra.

3651 days ago
0
0
1 answers
1 asked
 
will the look change
will this upgrade fit on a tokyo marui m4s system...and will the look of my airsoft has to change...this is just a internal upgarde right...gun will still look like its stock...thanks

3674 days ago
aquaman826 A
0
0

(I have this same question)
Staff Answer:
This is strictly an internal upgrade and would not change the exterior look of your gun.

3674 days ago
0
0
1 answers
1 asked
 
Madbull Extension?
If I bought a Madbull Barrel extension, would you install an inner barrel that takes advantage of that extra length and is longer than the actual outer barrel?

3704 days ago
Isaac H
1
0

(I have this same question)
Staff Answer:
They should be able to do that, please contact our Customer Service line for further details on our upgrade services. CUSTOMER SERVICE: 1(909)869-0671 PHONE HOURS: 09:00-17:30 PST (M-F)

3703 days ago
0
0
1 answers
1 asked
Search Tags: 500FPS M150 Spring Bushings Inner Barrel Hop Up Bucking Piston Torque Up Gear Spring Guide Cylinder Aluminum Service

For Questions, Answers and Comments:

Talk about the Airsoft GI DMR Upgrade Package with your friends on the facebook comments box below:
Copyright © 2024 Airsoft GI
Disclaimer:

All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.

Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.

By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.