Airsoft GI small logo

Modify Baton Ryusoku Flat Hop Up Bucking (Hard)

[SI04 / O00E06][11712 / MOD HB BATON HARD / GB-05-63]
$14.42
( 10 Reviews ) ❤ Add to Wishlist
ADD TO CART
Orders over $179 qualify for free shipping
Free Shipping for orders over $179 No Coupon needed
New to airsoft? Here are some safety tips for airsoft guns that we recommend following.

Modify parts have always been extremely high quality and consistent in both construction and performance, and their latest Ryusoku Hop Up bucking is no different. This model has a 55 to 60 soft degree designed to work well with .25g BBs. With this bucking, Modify also achieved an excellent air seal which will benefit both your gun's FPS and consistency. Modify has included a Flat Hop Up Nub for increased stabilization of the trajectory. To coincide with this new feature, Modify has removed the hop up lug on the inside. Due to the high grade construction of the Modify bucking, it is highly tear and abrasion resistant and will stand up to most velocities. If you are looking to increase performance on you AEG, look no further. Little to no modification is needed when installing this bucking.

Specifications :
Manufacturer: Modify
Model: Baton Ryusoku Hop Up Bucking ( Hard )
Hardness: 55-60 Degree
Package Includes: Hop Up Bucking, Flat Spacer

Features:

  • Flat Nub
  • Designed for 0.25g or above heavier BBs
  • Improved distance and accuracy
  • Excellent extreme temperature properties
  • Improved air seal
  • Superior tear resistance

Specifications
Manufacturer: Modify
Color: Black
Material: Rubber
Package Includes: Hop Up Bucking, Flat Spacer
see 10 reviews | Write a Review
verified buyer
M. STANTON | 2014-07-12
Product Information:
the flat hop bucking has impressed me alot and is now installed in three guns i have. i definitely recommend it.


Pros:
comes with both the bucking and the flat hop nub
noticeable difference in both the gun's range and accuracy
not super easy to tear the bucking

Cons:
non that i can think of just be sure that it is properly seated when reassembling
verified buyer
D. MONROE | 2016-04-08
Product Information:
I recommend getting this. its a cheap upgrade to improve the accuracy of your gun. works very well and provides a very straight hop.

Pros:
Accurate
good quality
easy to install if you know how to take apart the hop up

Cons:
the nub can be hard to install but not impossible
A. YEE | 2018-09-08
Product Information:
It is good provides great backspin, did not work in a G&G rotary hop up. For use with non rotary hop up units. Accuracy is consistent, and good. I had to use this in a SHS non rotary hop up. With about 6 o-ring spacers.

Pros:
Easy to install
Rubber is tough
Accuracy is consistent
Great backspin

Cons:
Doesn’t work with rotary hop up units
 
will this work with a kwa sr10 in pair with a miracle barrel?
thanks

3139 days ago
Owen H
0
0

(I have this same question)
Staff Answer:
Yes

3130 days ago
0
0
1 answers
1 asked
 
Pro win hop up
Compatible with The pro win hop up?

3253 days ago
Andreas Pedersen M
0
0

(I have this same question)
Staff Answer:
Yes

3253 days ago
0
0
1 answers
1 asked
 
Compatable with an m4 madbull hop up?
Mad bull?

3366 days ago
James B
0
0

(I have this same question)
Staff Answer:
It should be

3364 days ago
0
0
1 answers
1 asked
 
compatibility of a gr16
would this hop up bucking fit in a g&g m16 electric blowback.

3431 days ago
Max K
0
0

(I have this same question)
Staff Answer:
It should, but you will likely want the softer gray bucking

3430 days ago
0
0
1 answers
1 asked
 
340-360 FPS w/ .30 0 answers
1 asked
 
Will this work with a VSR10 clone?
I have the Well MB07.

3455 days ago
Joseph T
0
0

(I have this same question)
Staff Answer:
No it will not work

3452 days ago
0
0
1 answers
1 asked
 
September 8
Will this work good for a ares s-class M4A1 with a miracle barrel

3480 days ago
Mason W
0
0

(I have this same question)
Staff Answer:
You will most likely want the gray one.

3480 days ago
0
0
1 answers
1 asked
 
Does the bucking work with an H-nub?
The gun I bought this for has a hop-up arm that's molded into the shape of an H-nub, so I can't use the flat nub that comes with this until I get a new hop up unit. Will the H-nub shape arm still work with the bucking, since the bucking has no bump inside it?

3500 days ago
Daniel C
0
0

(I have this same question)
Staff Answer:
It should

3500 days ago
0
0
1 answers
1 asked
 
Can this be used in a spring gun
Can this bucking be used in a spring sniper rifle with a magic box miracle barrel?

3502 days ago
chad H
0
0

(I have this same question)
Staff Answer:
No

3501 days ago
0
0
1 answers
1 asked
 
What is the difference between this and a r-hop? 0 answers
1 asked
 
Kwa sr10
Will this work in a stock kwa sr10?

3527 days ago
Spencer B
0
0

(I have this same question)
Staff Answer:
Yes if installed properly.

3527 days ago
1
0
1 answers
1 asked
 
Installation
Will ASGI's tech department install this for me? Thanks

3539 days ago
Andrew H
0
0

(I have this same question)
Staff Answer:
They can.

3539 days ago
0
0
1 answers
1 asked
 
Installation vid? 0 answers
2 asked
 
what inner barrel should i buy in conjunction with bucking?
what barrel should i use with this bucking. I have a g&g raider-L. And i was thinking of buying this and a barrel. Is the miracle barrel an overkill? Will i get similar results with a cheaper barrel lets say a G&G 6.04mm inner barrel. Since the highest weight bb i will be using is .28g and my fps is like 360.

3580 days ago
Paul S
0
0

(I have this same question)
Staff Answer:
A miracle barrel works well with this style of hop up

3578 days ago
0
1
1 answers
1 asked
 
should i go with this or soft version?
should i go with this or soft version with a gun shooting 350 fps?

3592 days ago
mary k
0
0

(I have this same question)
Staff Answer:
You will most likely get better results with the softer bucking

3591 days ago
0
1
1 answers
1 asked
 
will it work with the kwa br16
they say the kwa m16 needs a kwa bucking only

3592 days ago
michael l
0
0

(I have this same question)
Staff Answer:
It should work with that gun

3591 days ago
1
0
1 answers
1 asked
 
Will the Flat Hop Nub fit in KWA SR7? 0 answers
1 asked
 
I am having this installed in my ak but it shoots under 400
I purchased this then I was reading online that if I put a hard bucking in a gun shooting around 350 I might get some major inconsistencies. Is this true? I downgraded the gun to an m100 but I have really good compression. Not sure on the fps.

3626 days ago
chris s
0
0

(I have this same question)
Staff Answer:
This will work perfectly fine with your AK at that velocity.

3625 days ago
0
0
1 answers
1 asked
 
gas
Does this work for gas guns?

3639 days ago
Jonny M
0
0

(I have this same question)
Staff Answer:
It does not. This is for AEG's.

3639 days ago
1
0
1 answers
1 asked
 
what are the differances between the (hard and soft ) flat hop
I don't know the differences

3655 days ago
Martin S
0
0

(I have this same question)
Staff Answer:
The soft buckings are designed for FPS builds below 400 FPS, the harder buckings are designed for FPS builds above 400.

3654 days ago
0
1
1 answers
1 asked
 
Would this be a good fit for the FMG4 series? 0 answers
5 asked
 
I have a 350 fps gun. Should i get a hard or soft flat hop?
My gun is a stock g&g gr4 g26. I plan on Getting this and a 6.03mm barrel. I use 0.2g bbs and i am not sure if i should get the hard or soft flat hop for my gun

3697 days ago
AnnaMaria F
0
0

(I have this same question)
Staff Answer:
You will first want to start using .25g for this flat hop bucking. At 350 fps, both should work fine, but we recommend the soft bucking for ~350 fps.

3696 days ago
0
0
1 answers
1 asked
 
do you have to take apart your gear box to instal this?
i want to improve my gun, but I'm clueless

3704 days ago
michael c
0
0

(I have this same question)
Staff Answer:
No, but you may need to disassemble your hop up unit to get the flat nub seated properly,

3703 days ago
1
0
1 answers
1 asked
 
does the flat spacer go where the nub usually goes
i want it

3705 days ago
johnny c
0
0

(I have this same question)
Staff Answer:
Yes, that flat spacer will replace the nub in your hop up unit.

3704 days ago
1
0
1 answers
1 asked
Search Tags: Tokyo Marui JG SRC Echo1 VFC G&P AGM King arms Systema G&G upgrade Range Accuracy Firm Compression

For Questions, Answers and Comments:

Talk about the Modify Baton Ryusoku Flat Hop Up Bucking (Hard) with your friends on the facebook comments box below:
Copyright © 2024 Airsoft GI
Disclaimer:

All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.

Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.

By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.