Intellect 9.6v 2000mAh NiMH Nunchuck Battery
[V07B05A][02772 / ERBAT6 / 603235]Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Description:
The 9.6v 2000mah Intellect Cell battery pack is designed to fit into the hand guard of the M4 series that normally only have space for a conventional mini battery. The battery fits in the M4 hand guard by splitting the battery pack into 2 sections that go around the barrel. Due to its higher voltage this battery will give your AEG a faster rate of fire and it is a must for your upgraded M4.
Specifications:
Manufacturer: Intellect
Voltage: 9.6v
Milliampere Hours: 2000mAh
Cell Type: Nickel-metal hydride (NiMH)
Connector Type: Mini
Recommended Fit: ICS M4 Battery Box, M4A1 hand guard, M733 hand guard, and M4 Commando hand guard
Please Note:
For best performance we recommend insulating
the wire connections with electrical tape.
Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.
- Specifications
- Manufacturer: Intellect
I bought this for my socom gear DD M4, and it is pretty much amazing.
But the real question for me was if it would fit in my magpul moe hanguard.
After taking the metal shell off my mofset (prolly not the greatest idea but whatever) then wrapping the mofset wires on one side, the battery on top and bottom, and the tamiya connectors on the other side, i manage to get it to fit, which i am so tahnkful for. Amazing bang for teh buck!
Pros:
Cons:
I ordered two of these batteries for my Masada and they did not disappoint! I had a 9.6 small that died so quick, but these batteries last, and not to mention that they give you a higher fire rate! Overall, they're great and I love them. Would run them on any gun with the space for these batteries.
Pros:
Insane Duration- I tested them all day on my Masada and my friend tested one on his M4 S-System and they were phenomenal on how long they lasted!
Fire rate- My Masada's fire rate(even though it's high on an 8.4 already) it took a jump on the fire rate.
Cons:
I don't see any cons, but they do take up some significant space in my gun's handguard, and not to mention they don't fit on certain guns.
I ordered one with one of the airsoft gi custom CQRs, and this battery exceeded my expectations. The battery has a large amount of life to it, and it gives my weapon a great trigger response and great ROF. Intellect is a great battery company overall, and I would definitely suggest this battery.
Pros:
- Large battery life (Went through an entire night operation without any sign of it losing life)
- Great voltage output
- Does what you think it does!
Cons:
- size might be cumbersome (I use it in a PEQ2 box)
- For all I know, it doesn't fit inside of a MOE handguard. I might be wrong, I haven't actually tested this, but the dimensions might be too big.
|
play time
how long will this battery last before i have to recharge?
3477 days ago christopher s
0
0
(I have this same question)
Staff Answer:
It depends on how much you are shooting 3476 days ago 0
0
|
1 answers 1 asked |
|
will this fit in a lancer tacticak m4 mk18.
hi
3494 days ago garett e
0
0
(I have this same question)
Staff Answer:
No 3494 days ago 0
0
|
1 answers 1 asked |
|
KWA G36C/KWA Magpul PTS RM4
Will this battery fit in a KWA H&K G36C or KWA Magpul PTS RM4 Scout Electric Recoil (ERG)?
3498 days ago Stefan S
0
0
(I have this same question)
Staff Answer:
Most likely not 3498 days ago 0
0
|
1 answers 1 asked |
|
fit ? | 0 answers 1 asked |
|
Will it fit
PEQ 15
3538 days ago jakob N
0
0
(I have this same question)
Staff Answer:
No 3536 days ago 0
0
|
1 answers 1 asked |
|
will this fit?
will it fit in the Umarex H&K Full Metal MP5 SD5 AEG
3542 days ago matt k
0
0
(I have this same question)
Staff Answer:
It should be able to fit in the stock. 3539 days ago 0
0
|
1 answers 1 asked |
|
Will this fit ?
In a
Umarex H&K Full Metal MP5A5 AEG Airsoft Gun (3 Round Burst/by VFC)
[R14A00][14989/2278063]
Crane stock style battery
3558 days ago Mason G
0
0
(I have this same question)
Staff Answer:
No it will not 3556 days ago 0
0
|
1 answers 1 asked |
|
Will this fit a JG M4 Tactical system handgaurs
what will want fast fire rate
3585 days ago Ed M
0
0
(I have this same question)
Staff Answer:
You will need a 9.6v 1600 mAh crane stock battery 3584 days ago 0
0
|
1 answers 1 asked |
|
G&G GR4 G26 w/ built in laser and light | 0 answers 1 asked |
|
Will this fit?
Would this battery fit in the MagPul USA MOE M4 Rifle Length Handguard even if very tight?
3605 days ago Brandon W
0
0
(I have this same question)
Staff Answer:
This battery should be able to fit. 3605 days ago 0
0
|
1 answers 1 asked |
|
will it fit in the umarex tavor tar 21
im tempted to get this battery along with the tar 21 but i need to make sure it will fit. if it doesnt, what do u suggest?
3629 days ago sean n
0
0
(I have this same question)
Staff Answer:
It should not. A 9.6v nunchuck 1600 Mah or 1600 Mah in Mini configuration should work. 3627 days ago 1
0
|
1 answers 1 asked |
|
will this fit in a g and g m4 hand gaurd
and if it doesn't what batty will
3632 days ago randall a
0
0
(I have this same question)
Staff Answer:
It should fit. 3627 days ago 0
0
|
1 answers 1 asked |
|
will this fit in a Apex Full Metal Carbine MK13 Mod 3 AEG or a Airsoft GI Desert G4-A3 Version 2 Carbine?
will this fit in a Apex Full Metal Carbine MK13 Mod 3 AEG or a Airsoft GI Desert G4-A3 Version 2 Carbine?
3635 days ago Alex S
0
0
(I have this same question)
Staff Answer:
This battery will not fit in either airsoft gun. 3633 days ago 0
0
|
1 answers 1 asked |
|
will this fit in g&g crane stock
Will this fit in g&g crane stock
3653 days ago Michael H
0
0
(I have this same question)
Staff Answer:
This will not fit in a crane stock very well. The 1600Mah variant of the battery should fit in a crane stock. 3653 days ago 0
0
|
1 answers 1 asked |
|
Will this fit in the cyma cm042 ak47 battery in stock version?
I want to know if it will fit in the stock of the gun?
3693 days ago Daniel P
0
0
(I have this same question)
Staff Answer:
It should fit okay. 3693 days ago 0
0
|
1 answers 1 asked |
|
would this be good for a Mk18
Would this be good for a G&G Combat machine mk18
3703 days ago nathan m
0
0
(I have this same question)
Staff Answer:
This battery will not fit in the crane stock of a G&G Mk18 Combat Machine. You will need to buy a 9.6V 1600Mah Nunchuck battery: http://www.airsoftgi.com/product_info.php?products_id=14727 3702 days ago 0
0
|
1 answers 1 asked |