Airsoft GI small logo
KWA KM16 Battle 2GX AEG Airsoft Rifle (Black)
[03900 / 104-01116]
$284.95
by A COMPTON Date Added: Monday 04 May, 2009
Product Information:
This gun is the most high quality gun I have ever held shot and had the pleasure to own. It is made of the same materials as the real M16, fiber plastics and aircraft grade anodized aluminum. There is no wobble and I mean NO wobble. When you get your gun your barrel will not be tightened all the way so to tighten all you need to do Is take off the heat shield and where the barrel meets the receiver there are four small allen screws. To tighten these screws all you need is a 1/16 inch allen wrench. After you do this it should not wobble for a long time. Now, this gun sounds like it has a two piece barrel right? Well, kind of right, but it actually is a one piece barrel with extra reinforcement. It is stronger than my G&G M4 barrel. There is no plastic on this gun just fibers. The fibers are a little stiffer than G&G's fiber. Also, G&G has a couple of measurement issues so overall, KWA has better externals than G&G.

Now for the internals. Let me tell you a little story. When I got my gun, it would fire oddly on semi-auto. Now I just got back from my local airsoft shop and The tested it and it seemed fine there. It worked great on full auto though. Anyways, I called them about two hours after I got the gun and told them what happened. The guy said it sounded like a connection problem, I said Ok, Ill be there to get it repaired ASAP. I decided that I would fire it a little more and see If I could find out the real problem. I eventually came to the conclusion that my trigger assembly was broken, so I took it in and when I got it back they said it was a broken trigger assembly and they just replaced the whole thing. I was relieved. Now, ever since I got it back, I can pull the trigger as fast as I can on semi.

Trigger response is incredible, actually, I am firing at around 17 rounds a second or 1000 RPM. For a gun with an M130 spring stock, this is incredible!!! Three round burst is like a tightly woven shotgun burst that you can fire rapidly! Now one thing on this gun that I saw as slightly annoying was the stock inner-barrel. The stock barrel is of average quality. It does not give consistent shots which means the barrel is not perfectly smooth. I also asked them to put a MadBull Black Python barrel in my gun. After that upgrade, My gun is accurate past 230 feet! Also it raised my guns FPS to 460! giving my gun incredible range. I have been able to pull off shots at close to 300 feet! With .25g bb's My gun is staying at 425 FPS +/-3FPS, very consistent in FPS and that also means in range. I also have been using .3g bb's. With those bb's I am shooting at about 385 FPS.

Now one disappointing thing externally was the carrying handle that it came with. It was strong and made of the same fiber as the stock but it wasn't metal. It was a little annoying for me, but if you don't care, keep it. I replaced it with a G&G carrying handle. Also, when you use G&G mags, there is no mag wobble either. I have held the real M16 and this feels exactly like it. You will be feared on the field if you use this, just be careful, It is a very hard hitter and I have been shot in the back from 50 feet with just a T-shirt on, It hurt a little. This gun does have some recoil when fired on full-auto. This can actually mess with your accuracy a little therefore, to stabilize it, act like you trying to pull the gun apart by pushing forward on the heat shield and pulling back on the handgrip while firing. It works.

I am using a 9.6 4200mah battery. I also own G&G's Gr16 Carbine and Echo1's G36C. This is the best out of all of them.



Pros:
-Best externals I have ever seen or held.
-Great feel and weight
-No wobble anywhere
-Great internals
-Great range
-Great accuracy
-Great rate of fire and trigger response
-Large battery compartment for MASSIVE batteries
-Best motor out of any brand
-Fully upgraded out of the box for sniper, field, or gunner
-Reliability seems to be good now

Cons:
-Plastic carrying handle
-Very few people seem to have problems with there trigger assembly
-Stock barrel is slightly inaccurate
-That's about it though! Con's are not that bad except for the trigger assembly which I'm sure won't happen to most people who buy this! Thanks for reading and God bless!

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Back Write Review
Copyright © 2024 Airsoft GI
Disclaimer:

All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.

Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.

By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.