Element Silent Head Set for Ver. 2/3
[04125 / ELE SIL CYL V2/V3]
Displaying 1 to 3 (of 3 reviews) Result Pages:  1 
by C. HENNICK verified buyer Date Added: Monday 22 March, 2010
verified buyer
For: Element Silent Head Set for Ver. 2/3
Product Information:
Just put this in my Vector Arms MP5. Everything seems to be of very good quality. The washers which are rusted in the picture came with a very nice finish so don't let the picture scare you. Both the cylinder and piston head were a little tougher than I expected, but I guess being smashed together in a gearbox over and over takes some resilience.

As others have said, this will not silence your gun. In terms of sound though, I was expecting a kind of "PHUT" but these really give more of a poppy/airy "PUH".

I will confirm the poor air seal. The cylinder head is not the problem - it's great. The o-ring that comes on the piston head is much to small (in terms of skinniness) to fit the piston head. I actually just threw on the o-ring that came with my stock piston head - it was much fatter and the seal is excellent now.

Good quality

Bad o-ring. I didn't chrono with the different o-rings, so I don't know the fps difference, but the o-ring that comes with this package definitely leaks air when you press the piston into the cylinder.
by T. RUSNAK verified buyer Date Added: Wednesday 01 July, 2009
verified buyer
For: Element Silent Head Set for Ver. 2/3
Product Information:
GOOD MATERIALS. i like that it came with the ball bearings for the spring, but i don't know if they forgot to glue mine or what because a day of use and i head a soft thud from my gearbox... i open it up to find the red rubber piece had fallen off and was smashed by my piston... to my surprise the sthing was still in perfect condition! i had to super glue the thing on several times untill it worked, same problem with the rubber on the gold colored piece, my suggestion, check the rubber pieces first before installation or put extra glue on them before hand to save yourself trouble

- increased FPS, very good design
- excellent durability
- softens the impact on cylinder head to improve gearbox life
- comes with ball bearings on piston head

- mine was poorly built where the rubber pieces fell off - not necessarily the case with all of them
by L. WISENBERG Date Added: Monday 06 April, 2009
For: Element Silent Head Set for Ver. 2/3
Product Information:
Product review:

This cylinder head/piston head set or whatever you want to call it is very very good.... The only problem is it actually only lowers the sound by 1.118mps but it is still very durable. Even though i bought this from another website I should have found this website first... I found that the piston head has 1 layer of foam padding with another layer of rubber padding, this rubber padding however has a air bubble for higher durability then they made the rest of it metal. Also the cylinder head has a foam padded back (4mm thick about) that adds even more durability then they made the cylinder head steel! That just makes it 30% over what good is... So far I put 30k rounds through this with a sp150 spring and no wears or tears...

I recommend this with any aeg that you want to turn to a sniper rifle.

I put the following upgrades into and onto my full metal Tsd m16a4:

1.) SP150 Spring
2.) Jbu aluminum piston head with reinforced steel teeth (full)
3.) Systema cylinder set
4.) Steel rails/ris/ras
5.) Reinforced grip
6.) Aluminum stock (from real m16)
7.) Rubber butt plate
8.) Foregrip
9.) Metal spring guide with ball bearings
10.) Systema super-torque gear set
11.) stock src high-torque motor (came with gun)
12.) reinforced 8mm gearbox shell
13.) 8mm oiless steel bushings/shims
then to top it off i put in a 6.02mm diameter barrel and a steel src air nozzle for maximum flow

My guns fps:
540 feet per second
best ammo:
Airsoft gi .28's
rof: 2 balls/sec
range: 310-450 feet!!!!!
years since upgraded: 1 year 2 months


Displaying 1 to 3 (of 3 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 598-1936
GI Tactical 9047 W Broad St. Suite # 5 Richmond, VA 23294 Phone: (804) 447-3334
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8771

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance

AIRSOFT GI Field Partners

Airsoft GI field partner D14 Airsoft

Copyright © 2017 Airsoft GI
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB1 Current Parse Time: 0.129 s with 25 queries