G&G M4/M16 450 rd. AEG High Capacity Magazine (Tan)
[04038 / G-08-066]
Displaying 1 to 6 (of 6 reviews) Result Pages:  1 
by M. LEMING Date Added: Wednesday 15 October, 2014
For: G&G M4/M16 450 rd. AEG High Capacity Magazine (Tan)
Product Information:
Capacity: 408 bbs. Fully winding spring: 107 spins. BBs fed when fully wound: 307 before misfeed (+6 before empty). Magazine fully rewound. 41 bbs fed before unwind. 5 more bbs before misfeed. 9 more bbs were fired before magazine would not feed. 40 bbs left in magazine.

These are my field's go-to rental mags, for good reason. They hold a lot and feed well. My field just got about ten of these with some new G&G CMs we purchased. We have some of these magazines in gray that are 6+ years old. Sometimes a screw will go missing from the bottom. Hard to go wrong with these.

Feeds ~310 bbs without rewinding. Feeds reliably. Looks good. Tan matches well with G&G's tan rifles. Solidly built. Fairly large capacity.

Does not hold as many bbs as advertised. 40bbs left that it would not feed. Takes a little while to wind the spring all the way.
by C. FRAZIER Date Added: Sunday 01 June, 2014
For: G&G M4/M16 450 rd. AEG High Capacity Magazine (Tan)
Product Information:
I bought this mag to use in my KWA CQR Mod 1 with KWA metal lower. I have trouble with a lot of mags fitting in my KWA mag well, most are too tight and have to be filed down. This mag fits perfectly with little wobble. My only gripe with this mag is it does not keep up with my rate of fire. I am just running a 7.4 lipo so mine does not shoot real fast.

Well built
Nice capacity
Good finish
Fits in my KWA mag well

Slow feed rate, no clue why but it won't keep up with my semi or full auto
by J. ABROLAT verified buyer Date Added: Tuesday 15 April, 2014
verified buyer
For: G&G M4/M16 450 rd. AEG High Capacity Magazine (Tan)
Product Information:
I own four of these and I haven't had any problems with any of them they are very well made.

Fit snug
Last forever (I have been using these for three years and still going strong)

nothing stands out these are very good mags
by G. FURE Date Added: Sunday 02 February, 2014
For: G&G M4/M16 450 rd. AEG High Capacity Magazine (Tan)
Product Information:
This is a great mag, especially if you have a tan gun. It's metal, and pretty durable. My friend has broke 2 of them, I have no idea how mine holds up great. These are metal, but still lightweight. The wheel is easy to wind, but it still takes forever, like most high caps.

Holds a lot of bb's
wheel easy to wind

weird color, a little bit off from my tan gun
wheel-winding takes forever
by A. AMBROSE Date Added: Sunday 26 September, 2010
For: G&G M4/M16 450 rd. AEG High Capacity Magazine (Tan)
Product Information:
This magazine is superb. It is by far one of the best hicaps that I've owned. The magazine not only keeps up with the high rate of fire of my G4-A1 tan (about 22 bps) but once you wind it fully, it can shoot out all 450 rounds without needing to be wound again!

A side note, this magazine is actually scaled 1:1 to a real M16 magazine, so it's about an inch longer than most normal magazines.

High Capacity
No winding after initial wind
Goes well with tan guns
Full metal

Price, but you get what you pay for, and more!
by G. PHELOS Date Added: Thursday 06 November, 2008
For: G&G M4/M16 450 rd. AEG High Capacity Magazine (Tan)
Product Information:
I bought this mag and it was good it was like all my other mags i bought but it was a bad color i never bothered to paint it because of the way it can mess up your gun i never recomend painting mags for that reason it is a great clip though i world highly recomend it

fast winding
fair price
easy to put bb's into

bad color
Displaying 1 to 6 (of 6 reviews) Result Pages:  1 
Back Write Review

Add to Cart

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 598-1936
GI Tactical 9047 W Broad St. Suite # 5 Richmond, VA 23294 Phone: (804) 447-3334
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8771

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance

AIRSOFT GI Field Partners

Airsoft GI field partner D14 Airsoft

Copyright © 2017 Airsoft GI
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB1 Current Parse Time: 0.123 s with 30 queries