Tienly GT-45000 RPM Ultra Torque Performance AEG Long Motor
[16024 / M-01-004]
Displaying 1 to 3 (of 3 reviews) Result Pages:  1 
by J. RUSSELL verified buyer Date Added: Tuesday 17 February, 2015
verified buyer
For: Tienly GT-45000 RPM Ultra Torque Performance AEG Long Motor
Product Information:
As previously mentioned, this motor is incredibly powerful. So much so that you shouldn't consider buying it unless you're willing to switch to LiPo- it will take 30-45A *rough estimate due to ammeter not tracking accurately* to spin it to full speed depending on gearbox. If you've got a NiMH battery, it probably won't have enough output to operate the motor. I'm feeding mine with a Matrix 11.1v 25c 4000mAh LiPo.

The motor runs cool, although the cooling can be improved by removing (might void your warranty) the stickers on the sides. They actually cover 25% or more of the intake port because they're probably stuck on crooked like mine.

The connector tabs are kind of irritating to plug into, they're too close to the brush spring post and make insulated wire ends difficult to connect fully. If you have ring terminals, the screws that hold the case together (not intended to be removed obviously) are pretty difficult to turn.

The motor is VERY stiff to turn, the magnets they used could potentially open a miniature black hole and alter physics in their immediate vicinity. Be careful to not stick the motor on a desk with any loose iron/steel tools, they'll be attracted to the motor case with a vengeance and may cause injury. (the Airsoft GI video of this holding up dozens of tools is for real)

The extension bushing/shield is nicely machined and has quality bearings supporting the motor shaft, unlike cheaper OE long types that are just a bushing on the shaft.

Can alter the laws of physics (take that, Newton)
Incredible amounts of torque
Insane ROF
Runs cool as a cucumber on 11.1v
Quality fit and finish
Direct powered brushes (has braided copper wire connecting brushes instead of relying on brush guides)
Keeps all your tools in one spot

None, aside from needing a warning about high magnetic engagement force. Watch your fingers!
by A. CASTOR verified buyer Date Added: Thursday 15 May, 2014
verified buyer
For: Tienly GT-45000 RPM Ultra Torque Performance AEG Long Motor
Product Information:
Tienly GT-45000 Ultra Torque Motor

I have this installed in my VFC M4 with stock internals, miracle barrel and a 7.4V lipo. It's currently chronoing between 379-389FPS and 25-26 RPS. ROF is excellent as well as the trigger response. I haven't fielded this thing yet, but I'm sure it won't disappoint.

VFC M4 "Stinger" @ 320-330FPS

After with Upgrades:
VFC M4 "Stinger" @ 379-389FPS
*Tienly GT 45000
*Miracle Barrel
*Madbull Blue Bucking

* Increased ROF
* Increased Trigger Response
* Lots of Torque compared to Tienly GT-35000.
* Price is a bit high, but worth the money for the increase in ROF and trigger response.

* Heats up quick after test firing.
by C. BINDER verified buyer Date Added: Friday 03 January, 2014
verified buyer
For: Tienly GT-45000 RPM Ultra Torque Performance AEG Long Motor
Product Information:
This is such an amazing motor. It's reduce loud how much it increase the ROF on my gun(kwa erg). And it stays very cool after continuous fire.

-stays cool after long periods of time
-snappier trigger response
-increases ROF
-loads of torque

-I would say price but it's worth every penny.
Displaying 1 to 3 (of 3 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 598-1936
GI Tactical 9047 W Broad St. Suite # 5 Richmond, VA 23294 Phone: (804) 447-3334
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8771

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance

AIRSOFT GI Field Partners

Airsoft GI field partner D14 Airsoft

Copyright © 2017 Airsoft GI
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB1 Current Parse Time: 0.132 s with 25 queries