G&P Seal Team Metal Body For M4 (B Type)
[02180 / GP183B]
Displaying 1 to 4 (of 4 reviews) Result Pages:  1 
by J. KERR Date Added: Saturday 02 August, 2008
For: G&P Seal Team Metal Body For M4 (B Type)
Product Information:
The is a full cast aluminum body, It is very thick and very sturdy. The paint is pretty good, but mine was applied in too hot of conditions, which made my paint very course. The laser etched markings are very detailed for the "Skull", although the letters for the various says are not very well aligned. I would expect this of a stencil, but not laser etch. JFYI Military and Govt "logos" cannot be a TM. So all markings will be there, even if you order it from China, as I did.

I want to warn any 416 or 614 owner that the top rails will not line up with the higher RIS. Also if you are not very experienced, or cannot Dremmel you should not by this item, or any of the full metal bodies, as you will need to make modifications to some of your gun parts, and completely disassemble your old body, as this does not come with all the parts you need. One complaint I have is the ejector port cover has no latching mechanism, so you spring it closed. Another complaint is the cocking mechanism is very tight now! and must be forced back into position.

Personally in the future, I will just by all metal guns and just airbrush what I want on them, because it just isn't worth this kind of money.

High quality Aluminum construction:Comes with Hopup: And most other parts you will need: Great detail:

Poor alignment of letters for words: Functionality of gun has been decreased(ejector port, and cocking mechanism): You must dremmel you original cocking mechanism, or your gearbox: The cost in my oppinion is way too high for this Item.
by J. JOHNSON verified buyer Date Added: Thursday 27 March, 2008
verified buyer
For: G&P Seal Team Metal Body For M4 (B Type)
Not sure if I got a lemon or what, but the one I received was horrible! It looked and felt great, but that's about as far as it goes for good things I can mention about this product. The fit was horrible on my TM M4A1. It took several minutes and various other people (all of which were experienced Airsoft Technicians) to install even the gearbox into the lower receiver. It's almost as if the holes were not cut correctly or the entire body was just a hair off. Even with a King Arms, Classic Army, G&P, etc... Hop-Up, I lost about thirty FPS from when it was installed with the original Tokyo Marui Body w/ Two Piece Hop-Up Unit. While I would like to think my G&P Navy Seal Metal Body was a fluke, I must forewarn anybody interested in this product, or any other G&P Metal Body for that matter, that you should be prepared for problems.
by P. WELLUMSON Date Added: Thursday 28 February, 2008
For: G&P Seal Team Metal Body For M4 (B Type)

It took me a few hours to install but after I figured out how to slide the mech-box in it was a piece of cake. (for those who have problems it sounds weird but slide it into the top of the reciever before anything else, than put the bottom of the reciever on and continue to attach all the wires and screws) This body looks amazing, the color is black (exactly the same color as the metal part of the m4 marui butt). The laser engravings are perfect and look great. the other thing i noticed is the infamous barrel wobble associated with the m4/m16 series has been virtually eliminated. My only real gripe is you cant have the stock marui dust cover and it wont pop open when you pull the charging handle like the stock one does. No big deal, and it dosnt affect the playability at all. Overall a great buy if you are looking to make your rifle look and feel a lot better.

-looks great
-high quality metal and powder coat
-fits marui perfectly
-eliminates barrel wobble
-feels very sturdy
-if you know your way around your AEG its a fairly simple install

-Have to buy a metal hop up
-cant have the dust cover flip open like in the stock one.
by N. BUTLER Date Added: Friday 27 April, 2007
For: G&P Seal Team Metal Body For M4 (B Type)
Great product! Very solid metal body. Not made out of cheap pot metal like some other brands. The only modification that I had to do was some drilling of the roll pin holes and wire brushing of the treads where the barrel extension meets the frame. Because of the powder coating being to thick. But now my M4 looks better than ever.
Displaying 1 to 4 (of 4 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 598-1936
GI Tactical 9047 W Broad St. Suite # 5 Richmond, VA 23294 Phone: (804) 447-3334
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8771

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance

AIRSOFT GI Field Partners

Airsoft GI field partner D14 Airsoft

Copyright © 2017 Airsoft GI
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB1 Current Parse Time: 0.128 s with 22 queries