WE SCAR-L Open Bolt 32 rd. Gas Rifle Magazine (Flat Dark Earth)
[08890 / 50103FDE]
Displaying 1 to 4 (of 4 reviews) Result Pages:  1 
by T. SUNG verified buyer Date Added: Tuesday 12 February, 2013
verified buyer
For: WE SCAR-L Open Bolt 32 rd. Gas Rifle Magazine (Flat Dark Earth)
Product Information:
I have six of these and they're great. WE mags have a horrible tendency to leak so what I recommend is that in the order comments, you ask that they test for leaks. They actually do read all of those and I've never had an issue. In store they check for me and it's great. Now with my time with these mags, they have yet to fail me, but I have some advice for when you want to keep them working. ALWAYS, and I mean ALWAYS keep some gas in them. I don't mean full all the time, but some gas will keep all the seals intact. Also, what I've noticed is that the paint on one of mine is really scratched up because I shoved it as hard as I could back into my mag pouch without looking. Honestly though, with the quality of the metal on these mags, and a little maintenance, these mags work great. Cool down isn't too bad either. It definitely can't compare to KWA's performance, but on full fill, it will last the whole mag in almost any weather. On fully automatic, the gas and performance might be hindered by cool down but I don't know of many situations where you will be dumping entire magazines in cold weather.

Full Metal Construction
Reliability (If properly maintained)
Dry Fire option
Holds plenty of gas

Requires maintenance to work
Probably the cheapest gas blow back rifle magazines around
Paint chips
When you're carrying a bunch, it gets really heavy
(I carry six and my vest is now 20 pounds)

Overall, very good product.
by C. HARRIS verified buyer Date Added: Wednesday 03 April, 2013
verified buyer
For: WE SCAR-L Open Bolt 32 rd. Gas Rifle Magazine (Flat Dark Earth)
Product Information:
I now have 7 of these including the one that came with the gun. I don't remember how many I bought from ASGI vs. other places, but it's the same product. I have never had any issues with any of these. I use propane in all of them (my SCAR-L has an NPAS system in it, so NO I don't shoot hot), and have never once had a leak. Each holds a TON of gas, easily enough for one and a half, maybe 2 and a half fills. I don't even really fill them all the way because I usually don't go through them all in CQB. In any case, they're great.

Real Capacity
Holds 1.5-2.5 fills of gas
Never leaked

The ONLY thing I can think of that might be a con is that they're a little hard to load. It comes with a feeding tube, but that's awkward. Speed-loaders only work if you get a good one and have the right technique for it. I, honestly, end up loading mostly by tube, then the rest by hand. In-combat I've used a speed-loader before but it takes some time. Be prepared to drop some dough on buying mags.
by C. HARRIS verified buyer Date Added: Monday 13 May, 2013
verified buyer
For: WE SCAR-L Open Bolt 32 rd. Gas Rifle Magazine (Flat Dark Earth)
Product Information:
Great Magazine. Reliable, sturdy, and I have a bunch of them now. Never had any problems.

Good seal
No leaks
God gas capacity

Capacity, that's it. It's only 30-some rounds, which kind of sucks for airsoft, but the way I play (CQB and SOME outdoor) that's ok.
by J. POWELL verified buyer Date Added: Friday 21 December, 2012
verified buyer
For: WE SCAR-L Open Bolt 32 rd. Gas Rifle Magazine (Flat Dark Earth)
Product Information:
First off, this is the Version 1 WE STANAG magazine for their open chamber GBBR's, not the newer Version 2. That means you get all the design flaws of this magazine.

Out of the box, the two I ordered didn't leak. However, considering that the three I already have all had issues before I fixed them, we can assume that these will develop similar issues.

The biggest issue is the seal between the reservoir and the back plate, over time the plate can warp slightly and start to leak. This is a relatively easy fix using blue gasket maker, which I did before I even fired the gun with the new magazines. A guide to do this fix can be found using Google.

The second issue is a small metal plate underneath the feed lip, over time this will start to leak. It can be fixed using superglue or JB Weld around the edge of the plate, I would recommend the latter.

Also, you need to be careful if you ever decide to remove the fill valve, the stock ones are very weak and will snap if overtightened even a fraction of a turn. If this happens new valves are pretty much your only option, and the Madbull ones are much sturdier than the stock ones.

It doesn't leak out of the box.
It only cost $32.97 when I ordered it.
Can be changed to hold 35 rounds relatively easily.
Holds enough gas for over 70 shots on semi auto.

It will most likely start to leak shortly after you get it.
Fill valve is weak and will snap with barely any torque.
Internal components are pot metal.
Extremely poorly designed.
Displaying 1 to 4 (of 4 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 598-1936
GI Tactical 9047 W Broad St. Suite # 5 Richmond, VA 23294 Phone: (804) 447-3334
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8771

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance

AIRSOFT GI Field Partners

Airsoft GI field partner D14 Airsoft

Copyright © 2017 Airsoft GI
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB0 Current Parse Time: 0.133 s with 22 queries