Valken Energy 8.4v 1600mAh NiMH Crane Stock Battery
[K08E00][14723 / 48054]Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
The Valken 8.4v 1600mAh NiMH Crane Stock Battery is designed specifically for use with a Crane Stock. The battery is pack is separated into two halves to fit the slots of the crane stock around the buffer tube.
Specifications:
Manufacturer: Valken
Voltage: 8.4v
Milliampere Hours: 1600mAh
Cell Type: Nickel-metal hydride (NiMH)
Connector Type: Mini
Recommended Fit: M4A1 hand guard, M733 hand guard, M4 Commando hand guard, MP5A5 hand guard, and MP5SD6 hand guard
Please Note:
This battery will fit in the G4, Combat Machine, G&G, VFC, KWA, and TSD crane stock. If you have any questions about which type of crane stock this battery will fit in please call us at (909) 869-0671.
Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.
- Specifications
- Manufacturer: Valken
Good battery
Pros:
Nunchuck
High rate of fire
Fits in crane stock nicely
Cons:
None
Got this battery with my first airsoft "replica" at the end of last summer(2013). It was only used in my G&G CM M4. I've played around 5-6 rec games, 4 hours play time each game, and it lasted me the whole game, every time, no problem.
Excellent battery, not too low voltage, but not high enough to strip gears, works for me.
Pros:
-Fits in crane stock nicely.
-It's a battery?
Cons:
None yet. Maybe I'll post a re-cap when it fails, but who knows when that'll happen.
|
Will it fit inside lancer tactical M4 interceptor spr?
Crane stock
2297 days ago Romer S
0
0
(I have this same question)
Staff Answer:
yes it will fit 2167 days ago 0
0
|
1 answers 1 asked |
|
lancer tactial m4 evo
will it fit this gun?
3321 days ago dalton t
0
0
(I have this same question)
Staff Answer:
It should 3310 days ago 0
0
|
1 answers 1 asked |
|
Vs 9.6v
This is cheaper but the same mAH rating as a 9.6v, will there be a performance difference in a g4?
3459 days ago wes b
0
0
(I have this same question)
Staff Answer:
It will have a lower rate of fire and trigger response 3458 days ago 0
0
|
1 answers 1 asked |
|
Fit in Rush GR CQW Blowback Aeg? | 0 answers 1 asked |
|
Fit in t15 Raider?
Fit in T15 Raider?
3514 days ago Cody R
0
0
(I have this same question)
Staff Answer:
It should 3513 days ago 0
0
|
1 answers 1 asked |
|
difference
is there a difference between crane stock and nunchuck batteries
3561 days ago cody c
0
0
(I have this same question)
Staff Answer:
No, they are the same 3561 days ago 1
0
|
1 answers 1 asked |
|
how long to charge with wall charger?
Please can someone tell me how long to charge this with a wall charger. I know i should have a smart charger but i cannot afford one right now. Please Help.
3696 days ago john D
0
0
(I have this same question)
Staff Answer:
It would depend on the wall charger, but ASGI recommends only charging for at most 3 hours for an empty battery. 3695 days ago 1
0
|
1 answers 1 asked |