Tenergy LiPo 11.1V 1000mAh 20C Tri-Panel Battery & Charger Package

[12108 / Black Friday Special]
$48.21
Write Review + Add to Wishlist
ADD TO CART

Please Note: Lithium Polymer batteries MUST be charged with a Lithium Polymer Balance Charger!

Black Friday Special

The Airsoft GI Black Friday Specials are one of the few ways to save money this holiday season. Lithium polymer batteries provide a higher output over traditional NiMH / NiCd batteries. Not only will this package allow you to save more than $10, but the included charger is specifically designed to properly charge your battery quickly and safely allowing you to get out and play.

Tenergy 11.1v 1000mAh Battery

Description:
Lithium Polymer batteries are the newest available batteries for airsoft and other hobby toys. They are designed as a light weight, high output power source. This 11.1v Li-Po battery can deliver more power than 12v Ni-MH large type battery with only half of the size and a third of the battery cells.

Specifications:
Manufacturer: Tenergy
Voltage: 11.1v
Milliampere Hours: 1000mAh
Cell Type: Lithium Polymer (LiPo)
Connector Type: Mini
Recommended Fit: M4A1, AK, M14, MP5, G36

    LiPoSack Use and Safety Instructions:
    Battery safety:

    ∑ Lithium Polymer batteries are volatile. Failure to adhere to established charging guidelines may result in fire, personal injury and damage to property if charged or used improperly.

    The makers of LipoSack or its distributors or retailers assume no liability for failures to comply with these use and safety guidelines.
    By purchasing this product, the buyer assumes all risks associated with its intended use. If you cannot comply with these guidelines please return this product unused to your retailer.


    1) Charge batteries in a safe area away from flammable materials and only on a non-flammable surface in a vented area. Do not discharge batteries below 3 volts/cell. Doing so may result in cell damage and subsequent cell venting upon a subsequent charge.
    2) Do not recharge damaged batteries. Dispose of damaged batteries in the proper manner.
    3) Some Lipo chargers on the market may have technical deficiencies that may cause it to charge the battery incorrectly or at an improper rate. It is your sole responsibility to assure that the charger you purchased works properly. Always monitor the charging process to assure batteries are being charged properly. Failure to do so may result in cell damage or fire.
    4) In the event of a crash, you must remove the battery from the model for observation and place in a safe open area away from flammable materials.

    LipoSack Use Instructions:

    1) Ensure that charger rate is properly set and polarity is correct.
    2) Attach charging leads to battery.
    3) Place battery in LipoSack towards the bottom.
    4) Place LipoSack on non-flammable surface.
    5) Route charge leads through vent at the top seam of the LipoSack.
    6) Close top flap of LipoSack and press hook and loop closure fully closed.
    7) Charge battery using proper charging practices.

Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.

Tenergy Li-Po / LiFePO4 Battery Charger

The Tenergy Li-Po / LiFePO4 Battery Charger is a very basic charger that is able to balance and charge your Li-po or LiFePO4 batteries. This charger extends the life of your battery by charging each cell individually to ensure that the cell is properly charged before use. The Tenergy Li-Po / LiFePO4 Battery Charger features a light weight and durable polymer case and is able to charge a battery with 1-4 cells.

Specifications:
Manufacturer: Tenergy
Model: Li-Po / LiFePO4 Battery Charger
Color: Silver
Package Includes: One (1) Charger

Specifications
Manufacturer: Tenergy
Color: Black / Silver
Material: Plastic / Metal
Package Includes: One (1) Battery & Charger
No reviews | Write a Review
 
Will this fit in the new PXG 9
Im buying the PXG 9 but now need a battery.

50 days ago
Max K
0
0

(I have this same question)
Staff Answer:
it will be a little tight but it will fit. just be mindful of not pinching the wires when you close the stock tube

41 days ago
0
0
1 answers
1 asked
 
Will this also be good for the krytac m4 crb 0 answers
1 asked
 
Will it fit the krytac m4 crb
I need an answer fast please

1667 days ago
Cheryl S
0
0

(I have this same question)
Staff Answer:
It should. If you need to know something right away, contact our customer service department

1665 days ago
0
0
1 answers
1 asked
 
KWA SR10
Will this fit in the SR10 crane stock?

1711 days ago
Andrew H
0
0

(I have this same question)
Staff Answer:
Yes.

1711 days ago
0
0
1 answers
1 asked
 
Fit
Will this fit in a kwa sr10

1715 days ago
Angeluz G
0
0

(I have this same question)
Staff Answer:
It should

1715 days ago
0
0
1 answers
1 asked
 
RM4
Will this fit the RM4 Scout handguard? I'm trying to find the best 11.1 lipo with a good battery capacity that i can fit in the handguard so i don't need a PEQ box

1716 days ago
Zane C
0
0

(I have this same question)
Staff Answer:
It should fit

1715 days ago
0
0
1 answers
1 asked
 
Will this fit in a IWI tar-21
I am getting a new airsoft gun this week and I want something with it to really pack a punch! Tell me if i can use this battery for this wepon. It is an aeg rifle "FYI"

1794 days ago
Caleb R
0
0

(I have this same question)
Staff Answer:
This battery should fit, however we recommend using something like a 9.6v NiMH battery or a 7.4 LiPo battery.

1792 days ago
0
0
1 answers
1 asked
 
Will this fit in a VFC mk16 (SCAR L)?
Will this fit?

1798 days ago
Jason L
0
0

(I have this same question)
Staff Answer:
Yes this will fit.

1797 days ago
0
0
1 answers
1 asked
 
will this fit a kwa cqr
I want to find out asap

1828 days ago
Regina P
0
0

(I have this same question)
Staff Answer:
This should fit.

1826 days ago
0
0
1 answers
1 asked
 
Will this fit into a crane stock?
just wondering if this will fit into the g&g raider crane stock i'm making lipo ready

1879 days ago
Douglas B
0
0

(I have this same question)
Staff Answer:
These will fit in the G&G raider crane stock, however, ASGI only recommends either a 7.4v Li-Po or 9.6v NiMH.

1876 days ago
0
0
1 answers
1 asked

Search Tags: Season Deal Combo Combination Bundle Savings 1000 mah 20 C Lipoly Lithium Polymer 11.1 V Volts Volt
This product was added to our catalog on Monday 14 January, 2013.
Copyright © 2019 Airsoft GI
Disclaimer:

All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.

Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.

By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.