Maple Leaf AEG Hop Up Bucking 75 Degree
[S04C04][13388 / MLAEG75]New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Maple Leaf airsoft offers innovative, cutting edge technology in upgrade parts for your gas blowback and electric airsoft guns. Maple Leaf parts are designed to enhance range and accuracy in airsoft guns with a minimum of modification and cost.
The Maple Leaf 75 Degree AEG Bucking has a few upgrades to the standard bucking. On the outer portion of the bucking are four "ribs" for a consistent amount of pressure and increased air seal. The inner hop up knob is similar to a flat hop for a more consistent back spin through every shot. This bucking is specifically designed for AEG's shooting between 350-400 FPS.Specifications:
Manufacturer: Maple Leaf
Model: 75 Degree Bucking
Color: Black
Package Includes: One (1) Bucking
Features:
Four External Ribs for Increased Air Seal
Enhanced Hop Up Knob
Consistent Backspin
Consistent Velocity
Increased Accuracy
- Specifications
- Manufacturer: Maple Leaf
- Color: Black
- Material: Rubber
- Package Includes: One (1) Hop Up Bucking
I skeptically threw this in my P* DMR build just to see what all the hype was about. I must say that I was very surprised that it performed on a level comparable to that of an R hop (which requires far more effort to properly install).
Well worth the money.
As for the fps increase mentioned in the previous review, I did not experience such an effect in my replica (my compression was already stellar), but have had similar results with high quality buckings before. Its simply a matter of improved air efficiency due to the tighter seal that high quality buckings often give.
Pros:
Increases range
Increases accuracy
If you're compression leaves some to be desired, could also increase fps
Cons:
None that I have experienced yet, even after a few thousand bbs have been put through it.
This thing is a beast! If you want to upgrade your range without breaking the bank, go for this! This also increase fps! This is truly the best hop-up you can get for the price! Don't get Systema(only for Systema guns), Echo1, Modify, Lancer Tactical, etc buckings. Those are all either overpriced, or suck. Buy this, and you won't regret it! I'm buying more for all my guns... *Note: Check the Degree before buying: 70 degrees is 350 and below, 75 degrees is 350-400 fps, and on...
Pros:
Cheap, reliable, durable, increases fps, increases range, awesome, awesome, and did I forget to mention: AWESOME!
Cons:
none, seriously, don't ask me, it's really none, well, fine, it's.... nothing...
This little hop up bucking is amazing! The only problem is it doesn't work on miracle barrels without modification. But other than that, I put this on my 365 mm 6.03 madbull inner barrel and i'm able to hit a man sized target consistently at about 200 ft! It is definitely worth the $8, I would recommend this to anyone with an AEG because it will help you shoot further and more accurately.
Pros:
-Increases range and accuracy a lot
-Easy to install
-Sturdy
Cons:
Only that it requires modification to work with miracle barrels
|
Is this better than the bucking in the krytac lvoa-c?
Is upgrading it even worth it on the lvoa
2308 days ago Jessie L
0
0
(I have this same question)
Staff Answer:
The stock hop up unit and bucking are fine in the Krytac. 2205 days ago 0
0
|
1 answers 1 asked |
|
In a KWA CQR mod 1?
I want to buy a kwa cqr mod 1 and id like to upgrade it to have better range and accuracy
3525 days ago David R
0
0
(I have this same question)
This may help but the cqr line of guns from kwa comes with a weak cylinder made for cqc. If you upgrade the cylinder in your cqr the fps will dramatically increase about 380-390 fps with an shs cylinder. This should increase your range as you'll be able to shoot heavier bbs further. I did this to my cqr and it's working very well the 2gx bucking inside your gun should work fine.
3458 days ago
Alan M
0
0
|
1 answers 1 asked |
|
Do you know if this will fit a kwa cqr hop up? | 0 answers 1 asked |
|
will this fit in a kwa m4 hop up? | 0 answers 1 asked |
|
R-Hop?
Would this bucking be able to be used with an R-Hop? As in, is it an true "flat hop" bucking"? Or is there still an inner nub?
3557 days ago Travis M
0
0
(I have this same question)
Staff Answer:
There is still an inner nub. You will need to cut it out. 3557 days ago 0
0
|
1 answers 1 asked |
|
Stock
When will these be back in stock?
3566 days ago Nazneen I
0
0
(I have this same question)
Staff Answer:
We have them on order but we do not have an ETA from the manufacturer. 3565 days ago 1
0
|
1 answers 1 asked |
|
will this fit a madbull percision barrel
i have a 363 madbull persicion inner barrel and wondring if this fits it
3594 days ago Raymond M
0
0
(I have this same question)
Staff Answer:
It should work 3593 days ago 0
0
|
1 answers 1 asked |
|
Hop up
Will the pro win m16 hop up work with this?
3594 days ago Melissa W
0
0
(I have this same question)
Staff Answer:
It should work fine 3593 days ago 0
0
|
1 answers 1 asked |
|
Is there a way to tell which Maple Leaf bucking I have? | 0 answers 1 asked |