Action Army Teflon Cylinder Set for Type96
[G01G01][11557 / AAC-B02-006]
OUT OF STOCK
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
The Action Army Type96 Teflon Cylinder Set is designed and constructed to be as smooth and efficient as possible. The Teflon coating helps to reduce friction when the piston is cycling, and allows for more efficient compression. If you are looking to build the best and strongest Type96 airsoft sniper rifle on the battlefield, be sure to pick up the Action Army Type96 Teflon Cylinder Set today.
Please Note:
- This part is designed for airsoft ONLY. It cannot be used with real firearms
Specifications:
Manufacturer: Action Army
Model: Type96 Teflon Cylinder Set
Package Includes: Cylinder set
Features:
- Teflon Coating
- Reduces Friction
- Improves Efficiency
Please Note:
- Installation by a professional airsoft technician is highly recommended.
- Specifications
- Manufacturer: Action Army
- Color: Black, Silver
- Material: Metal
- Package Includes: One (1) Cylinder Set
see 2 reviews
| Write a Review
verified buyer
verified buyer
verified buyer
J. DELSENY
|
2013-10-25
Product Information:
I got this cylinder to replace the cheap aluminum stock cylinder that came with my ASG AW.308 (Type 96). I was a little hesitant about the teflon coating, but for the price, I was willing to give it a shot. Over all, it is decently constructed, a solid feel, and a nice weight (I prefer heavy cylinders, rather than light ones that could warp easier). The teflon coating is a lot more durable than I expected, and actually provides a much smoother gliding action for any nylon piston washers than polished SS. The piston seal seems fine, and will likely provide enough of a seal for most standard upgraded springs, however if you plan on using a crazy spring, then a polished SS cylinder would likely provide a better seal. I did notice that the cylinder head had a sharp edge at the nozzle opening (where the BB sits), but a little light sanding with 150 grit paper or deburring tool easily removed that. The only big flaw, for my rifle, is that the machined nut on the end is smaller than the nut hole in my bolt arm assembly. the length is correct, but because it is smaller, the cylinder is not held at that point from rotating slightly. To compensate, I just had to tighten the cylinder screw really well (maybe some thread-lock?) and just keep checking that it hasn't loosened.
I don't expect the teflon coating to last forever, but I purchased this knowing that, and have added some nylon rings in my receiver and smoothed up any edges that come in contact with the cylinder.
Pros:
Decent construction
Solid feel
Heavy weight
Very true (straight)
Smooth action (with nylon guides for piston)
All around good value
Cons:
Sharp lip on cylinder head (easily removed)
Incorrect sizing of machined nut fitting at the end of the cylinder (for ASG AW.308 rifle)
Teflon coating can wear off (no way around this, teflon coatings are what they are, a coating)
I got this cylinder to replace the cheap aluminum stock cylinder that came with my ASG AW.308 (Type 96). I was a little hesitant about the teflon coating, but for the price, I was willing to give it a shot. Over all, it is decently constructed, a solid feel, and a nice weight (I prefer heavy cylinders, rather than light ones that could warp easier). The teflon coating is a lot more durable than I expected, and actually provides a much smoother gliding action for any nylon piston washers than polished SS. The piston seal seems fine, and will likely provide enough of a seal for most standard upgraded springs, however if you plan on using a crazy spring, then a polished SS cylinder would likely provide a better seal. I did notice that the cylinder head had a sharp edge at the nozzle opening (where the BB sits), but a little light sanding with 150 grit paper or deburring tool easily removed that. The only big flaw, for my rifle, is that the machined nut on the end is smaller than the nut hole in my bolt arm assembly. the length is correct, but because it is smaller, the cylinder is not held at that point from rotating slightly. To compensate, I just had to tighten the cylinder screw really well (maybe some thread-lock?) and just keep checking that it hasn't loosened.
I don't expect the teflon coating to last forever, but I purchased this knowing that, and have added some nylon rings in my receiver and smoothed up any edges that come in contact with the cylinder.
Pros:
Decent construction
Solid feel
Heavy weight
Very true (straight)
Smooth action (with nylon guides for piston)
All around good value
Cons:
Sharp lip on cylinder head (easily removed)
Incorrect sizing of machined nut fitting at the end of the cylinder (for ASG AW.308 rifle)
Teflon coating can wear off (no way around this, teflon coatings are what they are, a coating)
verified buyer
N. SWINEY
|
2014-04-02
Product Information:
This cylinder is extremely tough, and will increase the longevity of your MK96 APS2 rifle at least twice over.
Pros:
Teflon
Gets rid of that pesky silver shiny cylinder
Requires no modification to install
Cons:
Tough to install (have a pro do it, took me 2 days to do myself)
Pain to get the bolt back on
Nothing else!
This cylinder is extremely tough, and will increase the longevity of your MK96 APS2 rifle at least twice over.
Pros:
Teflon
Gets rid of that pesky silver shiny cylinder
Requires no modification to install
Cons:
Tough to install (have a pro do it, took me 2 days to do myself)
Pain to get the bolt back on
Nothing else!
|
|
Does this cylinder comes with the cylinder head that's on the picture? | 0 answers 1 asked |
|
|
Compatible | 0 answers 1 asked |
|
|
jg bar 10 | 0 answers 1 asked |
|
|
Compatibility | 0 answers 1 asked |
|
|
stock
when will this be back in stock
3906 days ago Will S
0
0
(I have this same question)
Staff Answer:
We are working to get it back in stock 3906 days ago 0
0
|
1 answers 1 asked |
|
|
Is this an original type or new type cylinder?
On new type cylinders, the end opposite the cylinder head is smooth. They do not accommodate the notches on original type bolt handle and the piece at the end of the bolt assembly.
4070 days ago John H
1
0
(I have this same question)
Original type
4067 days ago
John H
0
0
|
1 answers 1 asked |
Search Tags: APS MK96 Shadoe Ops Bolt Internal Upgrade Spring Maruzen Type 96 Compression
