Airsoft GI small logo
Airsoft GI account icon
Airsoft GI wishlist icon
Systema Metal M16 Hop Up Unit (Gray)
[00372 / SYS-ZA0724]		 $45.00
by S SPANOVICH Date Added: Tuesday 08 January, 2008
this is very easy to install, however I do see where you are coming from. I was new once, and i'm still new. but its easy to install

Assuming you have bought the chamber and nothing else, you will need 3 things to get this working

-The actual hop up chamber, and all its accessories (especially the little bead or rubber that it comes with, DO NOT LOSE THAT)

- An actual hop up buckling, Definately go with systema or prometheus. On first choice go with systema, but if its not available, go with prometheus, or on a last resort, get guarder. Stay away from G+P and Madbull

and of couse you will need a barrel. It doesn't have to be a tightbore obviously.

now for the actual procedure

take the barrel, and find the part with the groove in it. Get the buckling, and find the groove on it. If all is right, the grooves should line right up, and the the little "hole" in the barrel should be covered by the buckling. However, the grooves MUST line up, otherwise the hop up thing is worthless.

so line the grooves up, and slide the buckling onto the barrel. Beware, the guarder silicon buckling is quite stubborn, and might require some silicon grease. The systema buckling will slide in quite easily.

next, after you've got step 1 + 2 done, you stuff the hop up buckling (with the barrel obviously) into the actual chamber. Now this part HAS to be done right. The groove on the barrel, that is alligned with the hop up buckling, should be pointed DOWN as you push it into the chamber.

Once that is done, you basically just start putting everything in its place. however there is one more important step that also defeats the purpose of the hop up, if it is done incorrectly.

The little bead of rubber (that I mentioned earlier) should go "on top" of the buckling. this is kind of hard to do, but it is not impossible.

take the chamber and look down into it withOUT the top white piece that goes on. you take the rubber bead and set it on the part of the buckling that you see. It HAS to be on the buckling. then when you are done with that, you put everything together.

if you got the systema buckling, there is a brass ring that comes with it. all you do on that, is slide it from the tip of the barrel and slide it down into the chamber. Don't force it though.

Hoped this helped, if there are any other questions concerning this. Write another review.

Sam

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Back Write Review

My Account

Information

Categories

Customer Service

Promotions

Airsoft GI Field Partners

  • Airsoft GI field partner D14 Airsoft
Customer Service: 1.909.869.0671
Phone Hours: 09:00-17:30 PST (M-F)
Copyright © 2024 Airsoft GI
Disclaimer:

All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.

Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.

By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.