0 items
New Airsoft Guns / Products
Restocked Airsoft Guns
Pre-Order Airsoft Guns

Compare Products


CQB Spotlight Field Spotlight Sniper Spotlight
M4 RIS Unit for G&P, CA, KWA, G&G
[02987 / ECHO CQB RIS]
by J. GILLESPIE verified buyer Date Added: Sunday 15 June, 2008
Absolutely worth the $50 it costs. This item saved me about $65 because I was originally going to purchase the Classic Army RIS unit. It fits perfectly on my CA M15A4 Carbine. It took me a little bit of tinkering to finally figure out how to install it, but it worked and I was very surprised when it was finished. No modification, no dremelling required.

The only flaw, which is a very minor flaw, is that the bottom rail is slightly loose. There is maybe 2mm's of play but i'm sure a little bit of fine tuning can solve that problem.

The top rail is sturdy as sturdy can be. Make sure you don't lose the screw that comes with it. It will be inside the bubble wrap. When you tighten the screw down, that top rail ain't going anywhere.

NOTE: If you are going to install a barrel mounted 203, make sure you position the wiring and the little fuse box between the barrel and the top rail unit.

Install the top rail first. Out of the two pieces, it is the piece that has the rails on 3 sides. On the top rail, there is a little piece that is loose and hangs down. That is the end that connects to the delta ring. On the other end of the rail unit, there is a little piece of metal sticking out slighty (if you look at the pictures you'll see it) you must insert that part of the rail under the forward sight post ring. Make sure the little piece of metal isn't sticking out, it must be caught under the ring. Next, this part is a little tricky and hard to explain. Remember that dangly piece of metal I spoke of? You must get that piece UNDER the delta ring. Once you have gotten the top rail on, you must screw it down using the screw that was provided. When the top rail is in place, look at the top of your gun and make sure the top rail of the RIS unit is lined up with the top rail of your receiver, then screw it down.

My M15A4 has a fuse. Little clear plastic shell type thing. There is a heat shield on the bottom rail. You don't have to take it off to fit the battery wiring or the fuse box. It's a really tight fit once you get it on, but you don't have to do any modification to the rail unit. A battery, regardless its size WILL NOT fit inside the rail unit, so you will need a PEQ battery box. OK, after all the wiring is set up, onto the installation. Look at both ends of the bottom rail unit. On one end, there will be what looks like a groove. That is the end you put in first. Same order you installed the top rail. Insert the front of the rail into the ring behind the front sight post on an angle and then pull the delta ring down as far as you can and snap it into place.

Rating: 4 of 5 Stars! [4 of 5 Stars!]
Back Write Review
M4 RIS Unit for G&P, CA, KWA, G&G
[02987 / ECHO CQB RIS]

Item Discontinued

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 598-1936
GI Tactical 9047 W Broad St. Suite # 5 Richmond, VA 23294 Phone: (804) 447-3334
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8779

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance

AIRSOFT GI Field Partners

Airsoft GI field partner D14 Airsoft

Copyright © 2017 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB0 Current Parse Time: 0.057 s with 25 queries