0 items
New Airsoft Guns / Products
Restocked Airsoft Guns
Pre-Order Airsoft Guns
Warehouse Deals
All Brands
CQB Spotlight Field Spotlight Sniper Spotlight
Action Army Specialized S-Trigger for VSR10/BAR10
[09273 / B01-011]
Displaying 1 to 5 (of 5 reviews) Result Pages:  1 
by M. BURKE verified buyer Date Added: Monday 06 June, 2016
verified buyer
For: Action Army Specialized S-Trigger for VSR10/BAR10
Product Information:
I just recieved this along with my brand new Jg vsr 10. Fairly easy install, after properly adjusting the trigger and lubricating the trigger pull was AMAZING.

Super sturdy
Nice looking finish
Does not look or feel cheap

by B. LEE verified buyer Date Added: Sunday 28 April, 2013
verified buyer
For: Action Army Specialized S-Trigger for VSR10/BAR10
Product Information:
The thing is pretty decent especially when you consider it is $100 less than the Laylax Z-Trig. However that does come with its drawbacks...

Overall, a great value for $121, which, with a 20.5% discount, equates to sub $100 for a nice trigger mech.

-Build quality is of course lesser than the Laylax, but the functionality remains almost identical
-Nylon guide rings are smooth once lubricated
-Steel seems to be properly machined and doesn't show any wear after 1000 rds on a M170 spring.

-Internal spring broke, easy replacement if you know where to buy extension springs.
-Disassembly and reassembly is extremely annoying, especially if you don't know where something goes.
-Stock o-ring is not a good fit for the cylinder, as it is too small. Size is #13 from Home Depot or McMaster-Carr.
-Spring guide stopper and piston sear are much too thick for the receiver, a generous amount of sanding and cutting was required to make the bolt pull smooth.
-The rubber pad is scantily glued on, so it fell off after a few hundred rounds. It's not bad, but I replaced it with sorbothane just for good measure.
by A. OSBORN verified buyer Date Added: Thursday 06 June, 2013
verified buyer
For: Action Army Specialized S-Trigger for VSR10/BAR10
Product Information:
I've had this part in my gun for over a year and it is fantastic. My jg bar-10 is completely upgraded and has an m150 spring. It shoots about 530 fps and this part has worked great once broken it. I had to do some sanding to get it to fit the way i want it to, but its pretty easy to do. Overall, i would highly recommend this product.

can hold an m150 no problem
made of very good material
piston is very light and good compression
lightest trigger pull you'll ever feel

I had to do a bit of sanding on the part that pushes up behind the spring guide for it to fit right (easy to do)
Had to take it apart to screw in the rear screw to the receiver, then assembled it after it was screwed in. (Need an angled allen key or some tech skills)
Sanded down trigger guard to get it to fit
by G. VOLPE verified buyer Date Added: Sunday 11 November, 2012
verified buyer
For: Action Army Specialized S-Trigger for VSR10/BAR10
Product Information:
bought this because it was 100$ less than the laylax, there was a lot i had to do to this in order for it to fit into a jg bar 10 and when i mean a lot i do mean A LOT. the screws that come with any zero trigger are junk so id suggest getting better ones and the rear screw is above the trigger so it is impossible to screw in. i had to re drill the top of the vsr inner shelling and re tao it to a bigger bit and countersink it in so i could screw it in from the top. other than that it works great so far. used this along with a few other upgrades from airsoft gi and was able to get 250ft+ shots at people during a few games today and it felt great with this light trigger pull.

works great
seems like it was last a long time
really light pull

ton of modifications to get it to work
need to buy new screws
need to drill
by J. DUFRANE verified buyer Date Added: Wednesday 01 February, 2012
verified buyer
For: Action Army Specialized S-Trigger for VSR10/BAR10
Product Information:
I have this in my fully built BAR-10. I wasn't sure really what to expect since i had never shot a "Zero Trigger" sniper before. The box it comes with is really nice so it gave e hope it would be pretty good. Installation was tedious and it is not the same size or shape as the stock trigger assembly. You must disassemble the rear hex screws to put the back screw in, and then reassemble the trigger assembly onto a small square piece you screwed in. The large pin that holds the spring guide and the piston catch fit tightly into place and i had some issues with cocking the bolt while the large pin was fully pushed in but after a while it broke in and works fine now.OVERALL- I would recommend this over the laylax because the trigger pull is pretty nice and the laylax one is twice as much. The trigger pull is under an inch towards you and is lighter than any aeg ive shot but its nothing groundbreaking. better than stock and seems really sturdy so far. The piston is also very nice and smooth. I had to break off the front part of my trigger guard for it o fit and sand down the inside sides of it for it to work

Cool box with asian writing on the back (always a good sign)
Trigger assembly and piston are both top notch
Light trigger pull
Half the price of the Laylax Zero Trigger

Modification to trigger guard required
Main Pin was a B**** to break in for it to work properly
Displaying 1 to 5 (of 5 reviews) Result Pages:  1 
Back Write Review

Add to Cart

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 598-1936
GI Tactical 9047 W Broad St. Suite # 5 Richmond, VA 23294 Phone: (804) 447-3334
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8771

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance

AIRSOFT GI Field Partners

Airsoft GI field partner D14 Airsoft

Copyright © 2017 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB0 Current Parse Time: 0.130 s with 28 queries