0 items
New Products
Restocked
Pre-Order Products
GI Shockers

Manufacturers

CQB Spotlight Field Spotlight Sniper Spotlight
Airsoft GI PE Reinforced Sear Set for VSR 10/BAR 10 Series
[05951]
$55.00
Displaying 1 to 5 (of 5 reviews) Result Pages:  1 
by A. TOMKINS verified buyer Date Added: Friday 17 December, 2010
verified buyer
For: Airsoft GI PE Reinforced Sear Set for VSR 10/BAR 10 Series
Product Information:
I ordered this to contemplate installing it either in my HFC VSR clone or the Echo 1 m28 I ordered. I decided to do the VSR since I upgraded the spring. Since this was the only sear set in stock and the cheapest, I ordered it (only to see it go on sale a few days later, oh well).

First off, this is made by some Tiawan company called 'www.action-army.com' whose website is incomplete. Second, at first appearence, this are heavier and rougher than the stock sear set. I tested with a magnet and to my surprise, the included springs were not steel! The searset itself was, however, my magnet wasn't attracted to it quite as much as some steel gears from an AEG I had, meaning this must have something else mixed in or are just low iron content (either way, bad news bears).

Trying to install these was a nightmare from hell. The trigger box needed tons of drilling to work with it, the spring guide stopper's hole was not wide or deep enough, and I constantly had trouble getting it to catch my piston. It would work (and you really had to yank the bolt to get it to click) and then every so many shots it would lock up and I'd have to push the first sear down. The third time it locked up, I push down with a decent quality steel screw driver, and the peg on the side of the first sear SNAPPED. Um, what the heck? I thought this was supposed to be good quality steel? Upon further inspection I noticed that the metal when you looked on the inside looked EXACTLY like the cheap porous pot metal that broke off one of my CA M4's bodies. Only difference is this did have some sort of iron or steel in it.

All in all, I am EXTREMELY disappointed in the quality of this. For 55 dollars I expect a drop in it fit that works like a dream. The end user should not have to go through this amount of pain and time to make it fit, regardless of how much cheaper it is than the competitors (and even other brands are starting to not seem so expensive considering they probably WORK as intended).

If ANY other brand of sears is in stock, I highly recommend those instead. These sears are not worth the 55 dollars of your hard earned cash. If they were 35 bucks like they were this weekend, I'd consider it, but when it requires this much time to make it work, its just not worth more than 20 bucks to me.

Pros:
-Cheap
-Springs included

Cons:
-Requires tons of drilling to make it fit
-Low quality metal in both unit and springs
-Pieces SNAPPED OFF from me just apply pressure with a screw driver to unjam it. Even my anti-reversal latch in my Chinese AEGs has taken more pressure and lived.
-Overpriced for the true quality of it (cast metal junk, seriously, if you company who made your specific VSR through any amount of steel into their mixing process, it'd probably turn out just as good if not better)
-Overall worth it if its on sale for less than 40 bucks, but not if you have to pay 55 bucks or shipping.
-If it were me, I'd use you stock sears and some pen/pliers/misc springs so they catch the piston until you can purchase a better quality brand.
by T. REED verified buyer Date Added: Tuesday 07 September, 2010
verified buyer
For: Airsoft GI PE Reinforced Sear Set for VSR 10/BAR 10 Series
Product Information:
I installed this set in my TM G-SPEC and it has worked well for a few months. The metal is good quality and action is smooth. However it was not a drop in upgrade. There was a fair amount or filing and sanding required to get it to fit right and work. The guide stopper needed the most work. Watch the top tech sniper challenge for an idea of this.

Pros:
Great value
Quality material

Cons:
Not a drop in piece
by L. THOMAS verified buyer Date Added: Monday 26 April, 2010
verified buyer
For: Airsoft GI PE Reinforced Sear Set for VSR 10/BAR 10 Series
Product Information:
This is a very well made product. As far as I can tell if is made out of a very high quality metal. But like most things it is not perfect. The sear of this set has a tendency to not catch and this allows the gun to slam fire. Which is totally unacceptable for it makes having a precision weapon such as a sniper next to useless.

Pros:
High quality metal.
House brand.
Comes with extra springs in case you lose yours while installing. (I used them any way)


Cons:
Fails sometimes.
Makes firing accurately impossible
by J. FERREL verified buyer Date Added: Friday 09 April, 2010
verified buyer
For: Airsoft GI PE Reinforced Sear Set for VSR 10/BAR 10 Series
Product Information:
Good piece Only problem is unless you are planning on using these sears and the springs that come with them as replacement parts but still keeping your gun low powered (i use my VSR indoors so 350 FPS max) DO NOT use the springs that push the sears up from the trigger box. this spring is rather strong and wont have enough pressure on it by a weak spring so it will not fire! But if you throw in a strong spring it works fine!

Pros:
seems solid
Nice packaging
Not that expensive
will hold a heavy duty spring

Cons:
NOT REALLY A CON! but - spring that comes with is to strong for low fps springs in your bolt.
by A. DIMOVICH Date Added: Monday 22 March, 2010
For: Airsoft GI PE Reinforced Sear Set for VSR 10/BAR 10 Series
Product Information:
got these along with the rest of the ASGI PE upgrade parts becuase my jg bar 10 came slam firing, these worked for about 200shots, gun is slam firing again at the cause of this is pointing at the spring guide stopper, the actual trigger sear and piston sear are good but the stopper is no good stock one was better but now i cant find it so yaaaah.....frustrating right

Pros:
better than stock sear set, comes assembled

Cons:
spring guide stopper sucks
Displaying 1 to 5 (of 5 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Copyright © 2014 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB4 Current Parse Time: 0.422 s with 27 queries