0 items
New Airsoft Guns / Products
Restocked Airsoft Guns
Pre-Order Airsoft Guns
Warehouse Deals
All Brands

Compare Products

CQB Spotlight Field Spotlight Sniper Spotlight
Madbull Noveske 12" M4/M16 RIS (Black)
[04940 / NRH01 / MB FFHG 12]
Displaying 1 to 7 (of 7 reviews) Result Pages:  1 
by B. LOSIER verified buyer Date Added: Friday 28 February, 2014
verified buyer
For: Madbull Noveske 12" M4/M16 RIS (Black)
Product Information:
Love this rail system! Just be sure you get an outer barrel length at minimum 13inches long.
Looks great, feels great, and has a nice MATTE black finish!
My only complaint is that the rails are NOT milspec. I was able to fit some magpul XTM covers on, but with great difficulty. Plus because they are this way, I was not able to fit one of my front sights on strait. Because of this, I ether need to get another sight, or do some modding to my current one. Any angled/vertical grips you have will still fit fine though.

(PS: This rail DOES also fit on G&P/Magpul AEG receivers with no difficulty)

Looks great
Great MATTE finish
Love the Noveske style
Fits G&P bodies

Rails are not mil-spec. May make some mounts difficult.
by E. BAUMGARTNER verified buyer Date Added: Sunday 19 January, 2014
verified buyer
For: Madbull Noveske 12" M4/M16 RIS (Black)
Product Information:
I have a G&G GR16 (standard M4A1) that is wired to the front. I bought this rail system along with the MadBull Barrett Rec7 14" outer barrel and they look really good together. I had to modify my barrel a little bit to put this rail on, but I'll get to that in a minute. This rail is really long, and I love that. I bought this to make my gun into a SOPMOD Block 2 rifle. This rail is really light, and it has a very high quality feel to it. You can tell that this was created with a CNC machine. It is a nice matte black with Noveske trademarks. It is identical to the real one, except for a few minor differences. The only differences are: there is a small metal bar covering the gas tube hole which can not be removed (so that you don't put this on a real AR15) and the words "airsoft only" are laser etched on each side.
To install you just slide a metal ring down over the barrel, screw it on so the barrel is attached to the upper receiver. After that you slide the rail system on and screw in the 6 allen keys. Before doing this, make sure that the ring is attached very tightly. Otherwise the rail could be lose. The issue I was talking about earlier with installation is that since my gun is wired to the front, the wires poked out too much to screw on the ring. This was solved in about five minutes by grinding a small groove in the barrel for the wires to sit in, and that gave the ring enough space. Also, the fuse box was too big to fit in the rail so I just poked the wires out of one of the holes in the rail system. Simple fix and took less than five minutes. If you purchase this, definitely use the coupon codes. I saved 20% and because of that this rail is much better than any others.

Extremely high quality
Looks sexy
Good for a SOPMOD Block 2 build
Lots of rail space
QD sling swivels

Slight modification was required but it wasn't that bad
Pricey for my budget, but definitely worth it
by D. DEKOWSKI verified buyer Date Added: Monday 25 November, 2013
verified buyer
For: Madbull Noveske 12" M4/M16 RIS (Black)
Product Information:
This rail is really nice. not only is the metal high quality but it is extreamly light! it instantly makes you gun look ten times better.

nice QD attachment points
easy to install
trade marks

the rails are a bit sharp but not too bad
paint scratches
there was a metal bar that wont let my gas tube go in and i cannot figure out how to get it out.
by C. KAM verified buyer Date Added: Wednesday 16 October, 2013
verified buyer
For: Madbull Noveske 12" M4/M16 RIS (Black)
Product Information:
I purchased this for my KWA LM4 and installed it with ease, though I did have to use the Madbull barrel shim kit to align it correctly with the upper rail. This is a very high quality rail and if it's the look you're interested in I highly recommend it.

*One thing to note about this rail system is that even though it states that it's only a 12" rail system, that it's actually 12.658" in length. Ensure that you take this into consideration when planning your build.

*You don't need a special tool to install the barrel nut, a quick and easy way to tighten it is to utilize a strap wrench normally utilized for plumbing. The tool will only cost you about $4 at any Hardware store and won't damage the barrel nut.

- Simple and easy installation
- Very well built
- Light weight
- Licensed trademarks

- May require a barrel shim kit to properly line up the rail with the upper receiver.
- If you wish to still utilize the imitation gas tube you'll have to cut the blocking pin at the rear.
- States "Airsoft Use" on both sides of the rail
- It's missing the Noveske logo engraving on the right side of the rail.
by D. SMITH Date Added: Monday 16 September, 2013
For: Madbull Noveske 12" M4/M16 RIS (Black)
Product Information:
This rail is great. Fits amazingly on my aeg. Just a tip THIS WILL NOT FIT GBBRS ive tryed they need a special barrel nut. It will fit the lm4 though

Lots of rail space
Light weight aluminum
Trademarks look great

None if you have an aeg this is a must. YOU WILL NOT BE DISAPPOINTED
by H. MOE Date Added: Tuesday 25 May, 2010
For: Madbull Noveske 12" M4/M16 RIS (Black)
Product Information:
great product light, great finish i took off my front sight all together, it looks great on my classic army m16 i have no clue Wat the other guy is talking about. it came in a small box, with paper inside a HUGE box. no damage in shipping i could probably drop it from 50 feet when it was in the packaging and it would be fine. i would recommend a one piece barrel if you dont already have one, classic army comes stock with a one piece outer so I was good to go.

lighter than most full metal rails
really nice finish
no woble
nice packaging

not anything really, although you should have a one piece outer
by P. GOLDENBERG verified buyer Date Added: Tuesday 12 January, 2010
verified buyer
For: Madbull Noveske 12" M4/M16 RIS (Black)
Product Information:
I just got this RIS and LOVE it has a sturdy build, installs very easy, looks sweet. 110 is a lot of money but if you want your gun to look cool this is the part. The one thing i found is that if you put it on a CA upper the rails aren't evan but sense it not going on a CA its ok. I give it a 100/10

Looks great, awsome, and pure krunk
Well made
Great finnish
Noveske trade marks

Doesn't look right on a CA upper(in my case not a big deal)
Displaying 1 to 7 (of 7 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 598-1936
GI Tactical 9047 W Broad St. Suite # 5 Richmond, VA 23294 Phone: (804) 447-3334
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8771

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance

AIRSOFT GI Field Partners

Airsoft GI field partner D14 Airsoft

Copyright © 2017 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB0 Current Parse Time: 0.133 s with 25 queries