0 items
New Airsoft Guns / Products
Restocked Airsoft Guns
Pre-Order Airsoft Guns

Compare Products


CQB Spotlight Field Spotlight Sniper Spotlight
Echo 1 Complete 7mm AEG Gearbox for E90
[04805 / ECHO E90 MB]
$60.00 $46.80
Displaying 1 to 3 (of 3 reviews) Result Pages:  1 
by S. CHAPMAN Date Added: Wednesday 14 September, 2011
For: Echo 1 Complete 7mm AEG Gearbox for E90
Product Information:
I got one of these as a replacement for my old gearbox, and loved it! However, I replaced every part of it, except the gearbox shell, AR latch, cylinder head, and air nozzle. This is NOT because the stock parts are low quality, I just happened to have better parts in a ziplock bag. Anyway, onto the review. I opened the gearbox to see globs and globs of green goop, which E1 passes off as grease. CLEAN THIS OFF! My gun got about 3bps more after I cleaned this gearbox (which means that the "grease" actually slowed the gears down!). The gears are full metal, and appear very solid. Unfortunately, you will have to shim the gears. There was only one shim in the entire gearbox. However, I could not find any wear on the stock sector gear (others got replaced, but the sector MUST be V6-specific, so I kept the stock one) after several thousand rounds. The bushings are (I believe) made of brass, which is better than nylon, but could be better. The AR Latch is solid metal, and has held up very nicely to a 1400rpm setup. The upper assembly of the gearbox was... standard for a Chinese AEG. The piston was some form of polycarb material, but had no metal teeth, which is unfortunate considering the strong spring in this gun. Also, despite the VERY strong spring (I've been told it is an M140), the gearbox only puts out about 380fps. This is because the stock compression is absolutely horrible. Nearly 0% compression between the piston head and the cylinder. I replaced these parts (the stock cylinder was brass, and functioned well enough, though). The stock cylinder head does its job well, and held air when lubricated and fitted inside the new cylinder. The stock air nozzle is clear plastic, but gets the job done. The tappet plate is also clear plastic, so I replaced it with a King Arms one. The stock tappet NEVER failed me, but I was just uncomfortable with the clear plastic build material. The stock spring guide was made entirely of what I believe to be steel, but has no ball bearings (not even washers, which was disappointing). While the stock spring guide was a vast improvement over the plastic one I received in my P90's original gearbox, and I don't think it would break any time soon, I had a ball bearing spring guide (V2, btw) sitting in my room, so I swapped it out. The stock motor has a decent amount of both torque, considering the fact that it is a stock motor. However, it has NO speed. It gets about 900rpm on a 9.6v battery running either the stock M140 or an M100 spring. If you want a high fps, the stock motor is fine, but it can NOT be used for a high speed setup. The gearbox shell itself seems to be made of solid metal (not cheap pot metal used in my A&K gearbox, which snapped in half), and has held up to everything from a 400fps setup to my 1400rpm setup. One complaint I have about this gearbox is the wiring. The wires appear to be VERY low-quality. They are thin and stiff, probably 20awg. My first P90 gearbox came with much nicer wires. I replaced these stiff ones with 16awg low-resistance wiring. Another issue with this gun is the semi-auto trigger contact. Now, this may be a problem with ALL P90's, so don't take this too badly. However, after about 6 months of use, my semi-auto contact wore down (not the contact itself, I suppose, but the little hook that grabs it and pulls it back). Due to this, semi-auto has nearly quit working. There appears to be no way to either prevent or repair this issue. However, like I said, I've heard that this is a problem with ALL V6 gearboxes. All in all, this gearbox is pretty good. The only parts in it that NEED replacing are the wires and the piston. Otherwise, clean it up a bit and you have a pretty good V6 gearbox!

-Strong shell
-Decent spring guide, spring, cylinder, cylinder head, air nozzle, gears, bushings, AR-latch
-Okay motor

-lack of shims
-No metal teeth on piston
-Clear plastic air nozzle and tappet plate
-Semi-auto function fails after awhile (may be all P90s, not just E1)
by B. RAVINERA Date Added: Sunday 26 September, 2010
For: Echo 1 Complete 7mm AEG Gearbox for E90
Product Information:
Echo1 did an awesome job with this v6 gearbox for the P90. I used this and replaced all the poopy parts in my JG/KS P90. :D btw, T. Bickford, if your gun is shooting 2 or 3 shots on semi auto, that means the gearbox is slightly too far inside your gun. basically for every semiauto trigger pull, the tappet plate pushes the switch to the point it hits the full auto end of the gearbox momentarily. probably add some spacers or something....

Great to get for replacement parts and what not
Easy to upgrade if needed
Does what its meant for and more :)

none, and predicting there wont be any

(If you're having the problem as the guy below me is having, its an easy and quick and inexpensive fix :P in anycase, i dont think its a problem, coz WHO DOESNT LIKE A BURST FEATURE?!?!?!?! :D)
by T. BICKFORD Date Added: Monday 15 June, 2009
For: Echo 1 Complete 7mm AEG Gearbox for E90
Product Information:
This gearbox is very well built and very sturdy. shoots fast and hard. if you need a replacement v6, this is the one to get.

fast powerful
mostly metal
echo 1??

a few cheap feeling plastic pieces, but they work well
one small flaw; i dont know if this is only mine but after a few thousand rounds mine wore out a little bit and now for some reason when my p90 is on semi it shoots 2 or 3 instead of 1. not sure if my gun or gearbox. oh well, still works well

if you are even considering getting this, just buy it. XD
Displaying 1 to 3 (of 3 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 598-1936
GI Tactical 9047 W Broad St. Suite # 5 Richmond, VA 23294 Phone: (804) 447-3334
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8779

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance

AIRSOFT GI Field Partners

Airsoft GI field partner D14 Airsoft

Copyright © 2017 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB0 Current Parse Time: 0.178 s with 24 queries