0 items
New Products
Restocked
All Airsoft Guns
Pre-Order Products
GI Shockers

Compare Products

Manufacturers

CQB Spotlight Field Spotlight Sniper Spotlight
A&K M4 RIS for Real Delta Ring
[04593 / IU-M4R2]
$39.99 $33.99
Displaying 1 to 5 (of 5 reviews) Result Pages:  1 
by M. TERLIZZI verified buyer Date Added: Saturday 14 February, 2015
verified buyer
For: A&K M4 RIS for Real Delta Ring
Product Information:
This product is solid, two piece, full metal, and well designed. When I ordered this RIS I was just looking for a low price rail system not really knowing what to buy and when I saw this, there were no reviews or ratings on it and I just took a chance on it because I trust Airsoft GI. I was truly satisfied with what I received in a little more than a week. The top half has the top and side rails on it and the bottom half has the bottom rail on it. The bottom half not only locks in place with the Delta ring, but it has an addition curved piece of silver metal that slides in place to lock with the top half, ensuring it being secure, and keeping dirt and water out of the bottom. I am very pleased with the RIS and am glad to see that more people have aquired this item because as of the writing of this review, it has multiple reviews of it and is out of stock.

Pros:
The pros of this RIS is that it is sturdy, and can take a lot of hard use. It does not scratch as easily as the other metal parts of my D Boys M4, but that is because the rail system is made of a more durable metal which is good. I have a peq battery box holding two 9.6 volt batteries, and a big vertical fore grip on it which weighs quite a lot together, so the RIS can take some weight.

Cons:
The only cons for this rail system that I had were personal, not likely to happen to anyone else who acquires this. When I received the package the right side of slot T26 had a big gash in it, but it wasn't sharp, it was VERY smooth, I just painted black paint over it and that's the end of that, everybody can make mistakes, even machines that make thousands of these. Another con is that since I'm new to air soft I didn't quite put it in right and only after I put it in and forced it in wrong did I realize that you have to take that big plastic cover on your electrical wire to have the rail fit. Now the bottom doesnt go into the delta ring right and can pop out if you push it a little, but I've grown a habit of not touching it and it is all working out great. There are really not any cons for this magnificent rail system.
by A. BONNES verified buyer Date Added: Tuesday 25 December, 2012
verified buyer
For: A&K M4 RIS for Real Delta Ring
Product Information:
This rail is a nice piece for the money. It's made of aluminum or at least an aluminum alloy but it doesn't feel cheep. I picked this up to put on an ICS and the description is right when it says it will only fit on real steel style barrel nuts, because ICS does not use real style so I had to get a new one.

A few things I fount annoying are the edges are sharp and that it doesn't say in place. The sharp edges can be taken care of by putting rail covers on. When I say that it doesn't stay in place I mean it likes to rotate within the mounts. The best way I can think of to remedy this problem would be to get a fake gas tube which will hold the rail in place, but I have not tried this. One other thing is that there is not enough room to put a battery inside but that is common with rail systems.

Pros:
Made of Aluminum alloy
Feels strong and solid
Good price for the build quality

Cons:
Sharp edges
Can rotate in the mounts
by C. CONNORS verified buyer Date Added: Monday 28 January, 2013
verified buyer
For: A&K M4 RIS for Real Delta Ring
Product Information:
A perfect RIS system for an M4 with a real style delta ring, It has nice white numbers painted on to show you wich side is ment to face forward. It also helps you remembered where you mounted attachments (If you are anything like me you configure your gun in different ways alot and it is helpful to remember where you mounted grips and lasers/PEQ boxes) WARNING: If you have a front-wired gun you WILL I repeat WILL have to delete the fuse. Be ready to solder when you get it. I recommend this more for a gas gun or a stock-wired gun.

Pros:
Nice numbering
Full metal
Simple to install besides fuse removal

Cons:
You have to remove the fuse if your gun is wired to the front
by K. VU Date Added: Thursday 17 December, 2009
For: A&K M4 RIS for Real Delta Ring
Product Information:
Got this for a gift. Amazing construction, amazing look with the white painted numberings. Overall great RIS, only complaint is, mounted on the older CA m15a4's, even with the screw all the way tight, it doesnt stay in place, likes to turn if you try, but if you just leave it then it'll stay, hoping theres a way to fix it but its an amazing piece!

Pros:
Numberings look great
Durable, not cheap.
Cheap


Cons:
Doesnt stay in place
by A. BLACKWELL verified buyer Date Added: Thursday 29 January, 2009
verified buyer
For: A&K M4 RIS for Real Delta Ring
Product Information:
I got this R.I.S for my WE-Tech GBB M4. I was trying to see if it would work on the GBB or not. When it arrived, I took hold of it and found that this R.I.S was heavier than the CA R.I.S. I fix it to the WE-Tech GBB M4 and found it fit the We-Tech perfectly. The only thing is the bottom R.I.S wobbles a little. I put some plumbers tape on the edges and "WO LA" quick fix. Now the M4 is pretty front heavy.

Pros:
Heavy.
Metal.
Good price.
Fit WE-Tech GBB M4.
Top Rail is a good fit.


Cons:
Bottom R.I.S wobbles a little.
Displaying 1 to 5 (of 5 reviews) Result Pages:  1 
Back Write Review

Out of Stock


 
Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 869-0671
GI Tactical 100-A North Providence Rd North Chesterfield, VA 23235 Phone: (804) 320-2535
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8779
AIRSOFT GI SUPPORTS

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance AIRSOFT GI is an ASF Member

Copyright © 2015 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB2 Current Parse Time: 0.351 s with 29 queries