0 items
New Products
Restocked
Pre-Order Products
GI Shockers

Manufacturers

CQB Spotlight Field Spotlight Sniper Spotlight
G&G Polycarb Piston Head w/ Bearings
[04274 / G-10-045]
$17.00
Displaying 1 to 4 (of 4 reviews) Result Pages:  1 
by E. ROBERTS verified buyer Date Added: Friday 20 July, 2012
verified buyer
For: G&G Polycarb Piston Head w/ Bearings
Product Information:
Purchased this piston head to replace the stock plastic piston head in my AGM Scar. Great build quality and will definitely extend the life of the gearbox being made from a stronger polycarbonate material, not to mention, the included bearings will help to relieve any binding or stress from the spring. The o-ring that came with the piston head is to small and does not provide adequate compression. Went to my local hardware store and bought a slightly larger o-ring, which fixed the problem.

Pros:
- Great build quality/construction
- Increased compression over stock after replacing the o-ring with one that is slightly larger

Cons:
- Needed to replace the factory provided o-ring compromise I had to purchase myself from a local hardware store in order to ensure I wasn't loosing any compression.
by J. ARVAY Date Added: Sunday 13 December, 2009
For: G&G Polycarb Piston Head w/ Bearings
Product Information:
I've been running this piston head, with a new and larger o-ring, in a set-up putting out 446 FPS, and there is no damage after roughly 4,000 rounds. This is the original piston head that came in my G&G FS-51, and I thought that I would use it until it broke under the stress of an m140, but it's definately held up well.

Pros:
-Fairly cheap.
-Holds up well under a lot of stress, but I wouldn't go over an M140 with this installed. I'm not sure how much life mine has left in it, and I'd just stick with _M130's.
-Ball bearings.

Cons:
-O-ring is undersized. That's my only complaint, and it's easily changed out.
by J. HERPICH Date Added: Thursday 12 March, 2009
For: G&G Polycarb Piston Head w/ Bearings
Product Information:
G&G Polycarb Piston Head w/Bearings

Pros:
good piston head works much better then my stock one that came with my jg sr16
has good porting


Cons:
it also like any other piston head u buy needs a bigger Oring or just use the one off ur stock piston head like i did
by S. T. verified buyer Date Added: Tuesday 17 March, 2009
verified buyer
For: G&G Polycarb Piston Head w/ Bearings
Product Information:
Bought and put this piston in my Echo 1 G36C. I don't regret it.

Been installed for two months now, still without wear after around 5K rounds and an M110. Stock O-Ring was too small to provide decent compression, and I replaced it with the stock JG O-Ring (for some reason the JG o-ring provided better compression than a #14 size). Compression is now very good, but not perfect.
Bearings do their job and also add 10 or so FPS because they are like a spacer, and add a little extra tension to the spring. Porting is pretty good, and their are several around the head, in a weird teardrop-like shape. They serve their purpose well though.
Also, this is the stock piston head for the G&G Soc 16, which I have heard great things about.

Pros:
Price vs. Quality ratio (low price:high quality)
Bearings relieve spring tension
Bearings act as a spacer and provide ~10 FPS boost
Ported

Cons:
O-Ring too small (almost all piston heads have this problem, both pre-installed and after market ones)

Great piston, definitely recommended.
Displaying 1 to 4 (of 4 reviews) Result Pages:  1 
Back Write Review

Add to Cart

Copyright © 2014 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB1 Current Parse Time: 0.203 s with 30 queries