0 items
New Products
Restocked
Pre-Order Products
GI Shockers

Manufacturers

CQB Spotlight Field Spotlight Sniper Spotlight
Element High Speed Gear Set with Piston
[04183]
$40.00
Displaying 1 to 4 (of 4 reviews) Result Pages:  1 
by E. EDICA verified buyer Date Added: Saturday 18 September, 2010
verified buyer
For: Element High Speed Gear Set with Piston
Product Information:
Got these as a test. Ive always wanted to build a high speed setup and never really had a reason to have one myself. Since Airsoftgi had a sale for these gears I said why not so I put together my Stubby m4 with a crane stock and sd front end and matched these gears up with a 7mm bearing gearbox,m110 spring,bearing spring guide,bearing piston head and a GP 120 motor. I do all my own work and tech work for my team and others in my area. After shimming the gears for an hour (I wanted everything perfect) it was ready to rock and roll. put it a 11.1v lipo 15c 1100mah buffer tube battery and tried the fps got around 367 and 25.1 RPS not too bad. I did put in my Tenergy 11.1v 20c stick lipo and tried again the RPS jumped to 33.2 rps ill never need that much but its nice to know these gears can handle that.

Pros:
cost of the gears either on sale or not isnt all that expensive and you get shims and a piston
decent quality
cheap enough if they break get better ones
easy to install
fits perfectly in a CA mechbox

Cons:
piston needed alittle hand finishing (sanding and cutting off excess plastic from when they molded it
shims suck i threw mine away (used modify brand shims)
needs a sector chip
by M. PATTERSON verified buyer Date Added: Friday 06 August, 2010
verified buyer
For: Element High Speed Gear Set with Piston
Product Information:
So far I installled them very easily. The gears went right in the 8mm ball bearings with no modification. They are very soild and work great. However the piston is standard quality, its good for a back up. But if your just looking for a gear set for 8mm bearings, its a good buy.

Pros:
Good easy to istall gears for 8mm bearings.
Great quality metal, very soild.
Comes with piston.

Cons:
Piston is standard quality.
by B. HOLT Date Added: Wednesday 10 March, 2010
For: Element High Speed Gear Set with Piston
Product Information:
Ive had these gears for probably a year or two now and they are still in perfect condition. I am pulling an m90 or m100 (depends on what field im going to) and firing at 26rps. The shafts were a bit big though when i installed bearings but it just took a few minutes of filing. However, unlike the gears, the piston is just okay. Its nothing special, comparing it to a stock CA piston, the stock CA piston is a bit better quality wise. Im giving then 4 1/2 stars but im in a good mood so ill go with 5...

...however, results may vary as ive heard element's quality control is bad so maybe i just got lucky with a good gearset

Pros:
-inexpensive
-gears are amazing, holding up very very well... probably fired 30k rounds through them with little to no wear
...great gears,what more can i say

Cons:
-piston is of lower quality
-gear shafts are a bit larger than standard but in a way i guess this is better as you can always file it down... on the other if you order gears with too small of a shaft, there's nothing you can do about that.
by M. LARWOOD Date Added: Thursday 11 February, 2010
For: Element High Speed Gear Set with Piston
Product Information:
I got these to try out in my high speed MP5. Out of the packaging they seem quite nice, the metal appears to be of high quality. The piston is plastic which makes sense because of it's weight and it will most often be used in high speed setups. However, I'm thinking the piston will break anytime now... When I tried to put the gears in my gearbox I noticed that 3 pegs were not fitting in the Modify 7mm ball bearings that I installed. So I broke out the file and an hour later I finally got both sides of all 3 gears to fit nicely in the bearings. When I closed the gearbox and got it all back together, I pull the trigger and the piston only comes _ half way back. I assumed that because the gears and piston are a combo that they would have decent timing and angle of engagement; however, this is not so. Once I have the time I'll be taking out the second tooth to see if I can get the gun running smoothly but until then, these were a waste of time and money.

Pros:
Low cost.
High quality metal on the gears.
Comes with shims.

Cons:
Mine needed alot of filing down to fit in my bearing bushings.
Poor stock AoE.
Low quality plastic in the piston.
Displaying 1 to 4 (of 4 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Copyright © 2014 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB4 Current Parse Time: 0.818 s with 30 queries