0 items
New Products
Restocked
Pre-Order Products
GI Shockers

Manufacturers

CQB Spotlight Field Spotlight Sniper Spotlight
(Discontinued) SRC Metal Hop Up Unit for MK36
[03971 / SRCSG3602]
$30.00
Displaying 1 to 4 (of 4 reviews) Result Pages:  1 
by S. SQUILLACE Date Added: Wednesday 07 April, 2010
For: (Discontinued) SRC Metal Hop Up Unit for MK36
Product Information:
This product is a defect!!!
if you look at the nubs that lock into the front receiver, one of them is actually bigger than the other making this unit sit approx - 1/8 inch to far from the gearbox making the airnozzle not seat right.
dont break anything just sand that one defective nub down to about the same as the other, its metal it can do that


Pros:
all metal, very nice, defective (i like a challenge), comes with hop bucking and nub,

Cons:
little lose around barell ( use some Teflon tape) , needs some modification, pain in a**
by B. DUNN verified buyer Date Added: Tuesday 08 December, 2009
verified buyer
For: (Discontinued) SRC Metal Hop Up Unit for MK36
Product Information:
This unit doesn't fit any gun other than SRC without extreme modification. The other guy had it almost right but you don't have to break your guns barrell unit to get it to seat with the nozzle, just file the tabs off the unit itself. And you don't have to cut the feed tube on the hop-up off, just cut the feed tube on your magwell almost halfway off. Since it's plastic its way easier. Also be careful when cutting your feed tube, use trial and error and only cut off a little at a time. I goofed up and cut too much off so i had to glue an oring on it to keep the pellets from falling into the gun body.

Pros:


Cons:
by M. JARCHOW Date Added: Friday 28 August, 2009
For: (Discontinued) SRC Metal Hop Up Unit for MK36
Product Information:
Bought this for my cousin's JG G36c when a friend decided to make his first venture of airsoft tech work my rifle, and ended up ripping the entire hop up system out and broke the one I had installed. All metal makes this a durable product for sure... however it has some MAJOR cons that need to be addressed before you consider this.

Be warned, this hop up takes extreme modifications to *several parts* including one internal gearbox piece that make it so going back to stock condition requires replacement parts of the Barrel Assembly, Mag Well, and Air Nozzle. You have now been informed.... enjoy!

Pros:
All metal, and we're talking ALL METAL, except the hop up barrel lock, this sucker is 100% metal and is going to be rock solid and give you great consistency at higher FPS as well as stock.

Fits the thick ICS bucking I bought for my JG MP5 that decided it didn't like it... saved me another $6.

Works after some serious and hardcore modification to multiple parts within the gun...... including the hop up itself.

Cons:
Lots.... but bearable given it was my only option outside of buying a new plastic hop up(i like my guns to be metal and durable... plastic... not cool)

Basically I had to modify three separate parts on my G36c along with the hopup itself before this thing actually decided to work correctly. The first was the gearbox nozzle which had a protrusion on the top that helped the feeding on the stock hop up. This had to be completely removed before the nozzle could go all the way into the hopup and push the BB into the chamber.

Next was the barrel assembly, this irritated me the most, that I had to actually BREAK it in order to make this work because the hop up is too short for JG series G36 rifles. Without breaking it(cutting out the hopup knob stops that you twist the hopup into place with on the outer barrel) the hop up would sit with about 1/8 of an inch to spare reducing my FPS to maybe.... idk 30? It barely shot 30 feet with the maxed hop up. Taking out the hop up knob stops on the barrel assembly let it fall all the way back to the gearbox and solved the compression issue. FPS returned to 330! :D

Third, was the expected mag well issue. Frankly this is fine because I'd rather have the feeding into the hop up be as solid and uniform as possible, this increases consistency at any rate of fire... however I had to modify the hop up itself by dremmeling off a small portion of the inner feeding lip because it would not align right with my mag well(stock G36c mag well)

With several hours of headache and modification to the point of no return completed.... I can now rack out 20rps with my G36c once again full fervor and no reserve without worry of misfeeding! Consistency and range are not much better, but they are noticeably better to a small margin, so i'm happy, so I think I will add a systema hop up bucking and x-style hop up knob and see if that gives me more results. Also, adding a Systema M120 spring kicking it up to about 400-420 fps has given me a nice 30-40 foot range boost and due to the metal hop up my consistency is rock solid.
by J. SCHOENBERGER verified buyer Date Added: Wednesday 17 June, 2009
verified buyer
For: (Discontinued) SRC Metal Hop Up Unit for MK36
Product Information:
I just got this in the mail today for my KWA g36. Well, let's just say that I was less than satisfied. I'm just gonna put it out there so no one ends up wasting their money like me. THIS IS NOT COMPATIBLE WITH THE KWA G36C! In order for me to have been able to get this to fit in my gun, I would have had to saw the whole bottom cylinder off. The cylinder that is perpendicular to where the barrel goes in. The description said "may require modding" but I didn't think that I would have to saw half of the hop up off!

Pros:
Metal
lots of extra part

Cons:
incompatible with KWA g36c
$30 down the hole, I will try to resell it
Displaying 1 to 4 (of 4 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Copyright © 2014 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB1 Current Parse Time: 0.521 s with 31 queries