0 items
New Products
All Airsoft Guns
Pre-Order Products
GI Shockers


CQB Spotlight Field Spotlight Sniper Spotlight
Burst Wizard King Kong Super 2 Mosfet (Deans Connector)
Displaying 1 to 5 (of 5 reviews) Result Pages:  1 
by A. LAROSE verified buyer Date Added: Tuesday 20 May, 2014
verified buyer
For: Burst Wizard King Kong Super 2 Mosfet (Deans Connector)
Product Information:
This MOSFET unit is great! I've gotten two, but the first one came broken, which was really disappointing, but the second one works great! This has way more features than AirsoftGI advertises, and I don't really see why they wouldn't advertise them.

Plug and play, with the option of hardwiring it for extra features. It even comes with everything necessary to hardwire it.
Very easy to adjust how many shots per burst, each burst being between 2 to 9 shots.
Helps to protect trigger contacts, which is very helpful when used with a high voltage battery.
If you hold the trigger on full auto (which would be your burst with this MOSFET) for longer than 0.6 seconds, the gun will begin to fire again in full auto. This helps if you come across a huge crowd of people and need to spray. And 0.6 seconds is a lot longer than you might think. And if you don't like this (it's called "Resume Full-Auto"), you can disable it.
When hardwired, you have the option of pre-cocking (the piston starts halfway back, so the gun will fire immediately after pulling the trigger), sniper mode (you can only shoot once every second), LiPo alarm mode (it detects the voltage of your LiPo and will tell you when it's getting dangerously low), and rate of fire adjustment mode (should be self explanatory). You can also use it to tell you the RoF of your AEG (yeah, that's pretty cool) and set the unit to memorize the amount of shots your mag can make with your burst setting (for example, if your mag can hold 140 rounds and you're using 2-round burst, then you would set it to 70) and have it delay the gun from firing any further until a specified amount of time (this amount of change is changeable); this effectively makes it so that your gun basically stops firing when you're out of ammo, requiring you to reload until you can fire again, just like in real steel.

The first one that I bought came broken.
It's hard to plug in as the Deans are a little oddly sized.
It wasn't free.
There's a LOT of instructions, so you'll have to take your time if you want to fully get the best results.
by B. JACOBSEN verified buyer Date Added: Thursday 13 February, 2014
verified buyer
For: Burst Wizard King Kong Super 2 Mosfet (Deans Connector)
Product Information:
I am very pleased! when I got it it was much smaller than I expected! And it just plugs right I and it's ready to go!

It's size is perfect for putting in a buffer tube

The programing is a little tideous and confusing bit it's worth it!
by J. HALEY verified buyer Date Added: Tuesday 28 January, 2014
verified buyer
For: Burst Wizard King Kong Super 2 Mosfet (Deans Connector)
Product Information:
First one I have ever had. Only one I think I will. It is amazing. I just plugged it in at first, but a few days ago I hard wired it in my gr15 raider. Works awesome. Very simple to instal as well.

-Easy to just plug and play
-also easy to hardwire in your gun(as long as you can get your gearbox apart)
-it works so well, recommend it to anyone.

Takes up a lot of buffer tube space in my m-4. And if your not careful and cover up your connections well, it will short out on the buffer tube.
by J. MATSUMOTO verified buyer Date Added: Thursday 23 January, 2014
verified buyer
For: Burst Wizard King Kong Super 2 Mosfet (Deans Connector)
Product Information:
This works as advertised with simple plug and play install if you want.
My long term plan will be to permanently wire this in but it is convenient to be able to swap it into different guns for testing or temporary use. I did that just to let my son play wiht 3 round burst.

Simple plug and play install.
Deans connectors! This was a huge plus because I usually have to hack off the Tamiya connectors on everything I purchase before using.
Reasonable price for what you get combined with plug and play install option.
Lots of customization options, although it would take a little bit of time to do that.

For an M4 wired to the rear you have to plan on eating up some buffer tube space with this. Sort of prevents me from swapping in a CTR stock if I am going to keep the mosfet.
Keeping this as plug and play means it takes up a bit more space with the extra set of connectors. If you do a permanent install you cut out one set and save that space.
Tweaking options takes a bit of time. (Would be nice to have a USB port and option to plug into your PC to configure.)
by C. GORDON verified buyer Date Added: Monday 02 December, 2013
verified buyer
For: Burst Wizard King Kong Super 2 Mosfet (Deans Connector)
Product Information:
This MOSFET is so simple to use and so very, very effective! And it can be hardwired into the trigger switch to give 100% protection of the switch contacts. Right out of the box the burst is set 3 rounds when you have the fire selector set to full auto. Pull the trigger once and the gun fires 3rds. Continue to hold for .6 seconds and the gun fires at full auto. And that is just the factory setting. Almost everything about this MOSFET can be changed to fit exactly what you want. I haven't even made all the changes I want yet there are so many things you can do with this little wonder. And if that wasn't enough this kit can be hardwired in and there are even more features are unlocked. Another great feature of this MOSFET board is that it is really rather small. I have a crane stock and use 9.6V 1600 MaH crane stock type batteries. The MOSFET and all the connectors fit into the buffer tube with no problems at all. So far I am very, very happy with this purchase. Speaking of money, there are a lot of features for a very, very small price. Amazing!

- Super simple to install, goes between the gun wires and the battery
- The price is almost stupid cheap for all the features you get
- The small size means it fits in all sorts of tight spaces
- Lots and lots of great features

- One of the Deans connectors on my MOSFET is super loose fitting and the other is crazy tight. So much so that the connector that fits the gun wires comes out and the battery connector is so tight that you need a tool to sepperate the connectors. I actually had file down the connectors on the FET so I could connect and disconnect the battery without having to use a tool and possibly shorting out the battery. The other connector I had to use some black electrical tape to make sure it dosn't come apart. Really rather upsetting as this is a huge part of this product and quite an important bit. If Burst Wizard had just used the standard Red Deans connectors instead of the cheap dark red connectors this wouldn't be aproblem and I would happily give this product the highest rating.
Displaying 1 to 5 (of 5 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 869-0671
GI Tactical 100-A North Providence Rd North Chesterfield, VA 23235 Phone: (804) 320-2535
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8779

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance AIRSOFT GI is an ASF Member

Copyright © 2015 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB0 Current Parse Time: 0.242 s with 24 queries