0 items
New Airsoft Guns / Products
Restocked Airsoft Guns
Pre-Order Airsoft Guns
Warehouse Deals
All Brands
CQB Spotlight Field Spotlight Sniper Spotlight
Masamune Extreme Precision 6.01mm AEG Inner Barrel for M16A2/M14 (510mm)
[06170 / D01-020]
Displaying 1 to 5 (of 5 reviews) Result Pages:  1 
by W. BIELANOS verified buyer Date Added: Monday 03 May, 2010
verified buyer
For: Masamune Extreme Precision 6.01mm AEG Inner Barrel for M16A2/M14 (510mm)
Product Information:
ok so i tested this in my g&g m14 with modify torque ups an amp high torque motor and an m150 spring also a green g&g hop up and an scs nub. The gun fired 530fps with .2s. Using this set up i recieved less than impressive results, even with .36g bbs. however, upon further research (internet, talking to another sniper at my local field) we discoverd that 6.01 mm barrels have problems holding target at such a high fps (his gun shoots 550fps on a .2 and he uses a db customs 6.01)the moral of the story is, if your going to buy a 6.01mm barrel use it in a gun that shoots below 450fps or your accuracy will suffer go with a 6.03

-nice barrel
-increases your fps
-quality metal
-nice finsh (inside and out)

hop up window looks like it was shodily cut
-bad gorupings with high fps (all 6.01s)
by C. LEWIS verified buyer Date Added: Monday 08 March, 2010
verified buyer
For: Masamune Extreme Precision 6.01mm AEG Inner Barrel for M16A2/M14 (510mm)
Product Information:
The barrel I purchased was wildly shooting bbs to the right. Same issue as the guy below me. On careful inspection the window for the bucking was cut incorrectly and had a lip that was pushing the bucking over and causing the spin to be put on the bb incorrectly therefore forcing it right as it came out of the barrel.

The bad thing is, another person on my team order this same barrel and his does the EXACT SAME THING!!! Thats at least 3 barrels that I know of with the same issue! Before people go spouting out that we didn't test it right, we tested it in 3 different guns, all with bucking aligned correctly, and took the same 3 guns and tested with an EDGI barrel aligned in the same way. The ASGI barrel caused the right spin and the EDGI didn't....its the barrel, no question about it.

Contacted ASGI about this and they were less then helpful. Said they don't replace inner barrels. I am contacting them again about it and hopefully will receive a new one that is cut correctly, we'll see.

- cheaper than EDGI or other barrels

- BAD quality control, at least 3 barrels with bad cuts is just sad
- mutliple barrels with the same issue, and ASGI doesn't seem to want to do anything about it
by A. HOLZTRAGER verified buyer Date Added: Saturday 16 January, 2010
verified buyer
For: Masamune Extreme Precision 6.01mm AEG Inner Barrel for M16A2/M14 (510mm)
Product Information:
Well I have been airsofting for a while and I wrote a pretty detailed review about my KWA SR-10. I have listened to all the hype and watched the videos about these barrels. I would like to give my personal thanks to Airsoft GI for making these barrels available as a mass produced alternative for companies like DB Custom and PDI who are ripping customers off for barrels that dont COST anymore to make than 6.03 tightbores.

When these became available I quickly bought 2 of them even though I heard the rumors about the quality not being as good as should be. Today I installed the barrels in my KWA M16 and KWA SR-10. Due to problems with my KWA M16 that was not related to the barrels Im gonna skip to my SR-10. The stock barrel in the SR-10 is obvioulsy very good since its KWA and I did some shooting tests with it before and after replacing the barrel that I will not include in the review.

The ASGI 6.01 barrel greatly increased accuracy and FPS. I was confused at first when I was getting flyers with the new barrel (many more than before) but I believe it was because I was already shooting at the upper end of the FPS limit for .25s and the increase in FPS from the barrel made the BB to unstable. I then switched to .3s and had much better success with performance.

Great barrels, Great buy

Notice: The ONLY ammo I use in my guns are KSC .25s or KSC .3s made by KWA=best performance available

-Increased Accuracy/Groupings
-Increased FPS

-Increased FPS much more than I was expecting and will now only be able to shoot .3s (personal con)
by A. BRAHIM verified buyer Date Added: Wednesday 24 February, 2010
verified buyer
For: Masamune Extreme Precision 6.01mm AEG Inner Barrel for M16A2/M14 (510mm)
Product Information:
You get what you pay for, and if you pay less you might have to work more, as in my case. The cut for the hopup nub to poke thru was not clean, it had remnants of metal still protruding from the cut. THis caused my shots to curve wildly to the right, and I had to take a nail file and shave it down. Other than that rigmarole, the shot groupings are nice and the barrel performs.

Tight groupings

Shoddy manufacturing (the cut in the barrel for the nub to poke thru had a lip of metal protruding, causing my shots to go wildly to the right)
by K. WHITE verified buyer Date Added: Tuesday 02 February, 2010
verified buyer
For: Masamune Extreme Precision 6.01mm AEG Inner Barrel for M16A2/M14 (510mm)
Product Information:
Ok, so I finally got my M16 up and running for testing. Let me start out by saying I have a G&G M16 A3 and thats what I used to test the barrel.

Again I am testing Airsoft GI's 6.01mm precision barrels.They seemed to be made out of Aluminum. They are thick like the Prometheus barrels not thin like a mad bull. It fit right in and was the correct length.


I tested it at 100ft, 160ft, and 200ft. Ranges were measured. No to little crosswind.

At 100ft it was 10 for 10 with about a 8 inch target. The flightpath was straight and level.

At 160ft it was still 10 for 10 with a 12 inch target. With the hop up on and the round came up slightly and the dropped back down when it stalled out just as the BB hit the target.

At 200ft it was 8 for 10 with a 16 inch target.

Also, you could still hit area targets at about 200ft + ranges, however you needed to Kentucky wind it and I doubt someone would feel it if they hit them. It would keep their head down though and you might get a lucky shot.

Over all I am very happy with the performance of the barrel, especially for the cost. If you have another questions let me know. I highly recommend this barrel, especially over a mad bull and a Prometheus, both of which are good barrels in their own right. This one is simply better in cost and performance.


Displaying 1 to 5 (of 5 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 598-1936
GI Tactical 9047 W Broad St. Suite # 5 Richmond, VA 23294 Phone: (804) 447-3334
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8771

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance

AIRSOFT GI Field Partners

Airsoft GI field partner D14 Airsoft

Copyright © 2017 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB0 Current Parse Time: 0.131 s with 24 queries