0 items
New Airsoft Guns / Products
Restocked Airsoft Guns
Pre-Order Airsoft Guns

Compare Products


CQB Spotlight Field Spotlight Sniper Spotlight
King Arms Vertical Grip for RAS
[01530 / KA-TG-09-BK]
Displaying 1 to 7 (of 7 reviews) Result Pages:  1 
by R. TRESTON Date Added: Tuesday 03 November, 2009
For: King Arms Vertical Grip for RAS
Product Information:
this is a great grip!, works very well, very solid, and easy to use. it may not be "ergonomically" shaped but is still very comfortable, and fits on your RIS/RAS very easily. it had KAC (knights armament company) trademarks on it. it is not QD but is fairly easy to remove just turn the nob on the bottom and it comes off. Not being QD is not bad because unless you have a really sturdy QD mount it will ware over time and become loose. it is also a nice matte black color.

very sturdy
KAC trades
easy to install
good color
over all a great grip

none thus far
by J. ARVAY verified buyer Date Added: Monday 15 June, 2009
verified buyer
For: King Arms Vertical Grip for RAS
Product Information:
I'm not sure if I just recieved a lemon or not, but this is the worst vertical grip I've ever come across. Even a cheap JG vertical grip was better in quality than this. This grip doesn't even stay on my rail system half the time.

It's low quality hasn't erupted into an inferno of Chiclone quality and killed me...yet.

-The locking mechanism's threads are not a part of the vertical grip, they are just two pieces that come out of you pull on the bottom of the grip, the knob by which you fasten it to the rail.

-Very loose. I put it on my rail (not any out-of-spec rail like on some DPMS gun, a Madbull Noveske rail) There was at least a milimeter of clearance between the vertical grip and the rail even when it was fully tightened.

-Overpriced. For $20.00, I expect to not have a piece of trash like this.

-Even by putting duct tape on the rail where I wanted this grip to be, it still wobbles.
by B. ALLEN Date Added: Wednesday 14 January, 2009
For: King Arms Vertical Grip for RAS
Product Information:
This is a very reliable vertical foregrip with pretty much nothing bad to say about it. I have it as one of two lower mounts on my Echo-1 614, which had a hard time mounting it since the rails were just barely too wide, but the proper application of some force (remove the barrel from the gun before you do this or you might accidentally bend the barrel) and grease should help you get it on. Unfortunately, it's just as hard to get back off, so unless you intend on never taking it off of that rail again, you may need to file down either the rail or the grip or both, which I did.

It's much more comfortable to hold than the bottom of an RIS rail (such as on the 614 and G36C)

It looks exactly like the Vertical Grip used by the US Army and Marine Corps (and probably other nations' armed forces too)

It is built very well and certainly helps your aiming when not using a bipod or propping up on something.

It may be difficult to mount on Echo-1 guns (I only know about the 614, but other rifles may or may not have similar problems. A friend of mine who has a JG G36C was able to mount his vertical grip with no problem, but I am not sure if the rails on both guns were exactly the same size)

For what it is, $20 seems a bit pricey, but every other vertical foregrip is at least that much unless you get one as a free gift or something.

If you're having a hard time storing your 614, you may want to instead get the folding grip so that you don't have to remove this one every time you're done with it. However, I've heard that the folding grip also has a hard time with the rails.

If you own anything with RIS rails and need something more comfortable, I'd certainly recommend this.
by J. HARRISON verified buyer Date Added: Sunday 06 July, 2008
verified buyer
For: King Arms Vertical Grip for RAS
Solid grip, well built and does its job very well.
by V. PANG Date Added: Thursday 19 June, 2008
For: King Arms Vertical Grip for RAS
GREAT GRIP! fits tightly on the KWA M4 RIS and JG G36C. if you have a bottom rail with no M203, this is a MUST! its really solid and is really comfortable to hold. you have to get this
by B. HEELY Date Added: Friday 18 January, 2008
For: King Arms Vertical Grip for RAS
This seems to be made of the same Nylon plastics as high-quality stocks and pistol grips - the texture grips well even without gloves and it feels like i could take a hammer to it and the shaft wouldn't crack. Excellent strong build, the only thing i would question is the decision to make most of the bulk the securing screw.

The other reviewer is correct in that it is a very tight fit; I had to lean and shove on my Offizier to fit it. To me just means it won't come off!

KAC trades are also a plus.
by D. GRAHAM verified buyer Date Added: Wednesday 31 October, 2007
verified buyer
For: King Arms Vertical Grip for RAS
Ehh, had a rough time with this, bought it for my ECHO DMR, and it would't fit the bottom rail. I had to file it down,works great now, but might need modded a little...
Displaying 1 to 7 (of 7 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 598-1936
GI Tactical 9047 W Broad St. Suite # 5 Richmond, VA 23294 Phone: (804) 447-3334
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8779

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance

AIRSOFT GI Field Partners

Airsoft GI field partner D14 Airsoft

Copyright © 2017 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB0 Current Parse Time: 0.118 s with 21 queries