|| verified buyer
For: Lonex AEG Switch for Ver.3 Gear BoxProduct Information:
A well-needed upgrade from the stock trigger assembly in my Echo 1 SOF 3. I got that gun on eBay brand new for a great deal, but whenever I took t out of the box the trigger kept sticking, so I had to replace it immediately
This assembly slides better than the stock one in my gun. It makes the gearbox function better and feel better with the trigger pull.
I bought a Lonex V3 cutoff lever since it's higher quality anyway.
It's very easy to solder to the contacts if you use leaded water soluable solder and flux. Make sure you put heatshrink over the wires before you solder to the contacts. Tin the wire and tin the contacts with solder before joining the two to make sure there is no cold solder joint (lower resistance, assured connection).
I made my own FET switch and used a fly-back diode for the gun, too.
Feels like a higher quality switch.
No grinding or sticking.
Trigger returns perfectly.
Great for use with an N-Channel FET.
None. Would buy over again, especially at $11.