0 items
New Airsoft Guns / Products
Restocked Airsoft Guns
Pre-Order Airsoft Guns
Warehouse Deals
All Brands
CQB Spotlight Field Spotlight Sniper Spotlight
Action Army 6.03mm Extreme Precision Inner Barrel for VSR 10 (430mm)
[05844 / ASGI VSR10 BRL]
Displaying 1 to 5 (of 5 reviews) Result Pages:  1 
by B. PFLEDERER verified buyer Date Added: Tuesday 18 May, 2010
verified buyer
For: Action Army 6.03mm Extreme Precision Inner Barrel for VSR 10 (430mm)
Product Information:
This tightbore fits flawlessly in a BAR 10. At a range of 150ft the groupings were all within one foot of the target. I immediately saw an increase in range and accuracy after this was barrel was installed. The BB's fly straighter for a much longer time, and possibly an increase in velocity due to a tighter compression in the barrel. I have had no problems with this barrel, and would recommend this to anyone trying to upgrade their VSR 10 or BAR 10. It's definitely a good bang for your buck.

*Note that this barrel length is NOT MADE for the G-Spec.*

Noticeable increase in accuracy and range

Notable increase in velocity

The price is right

by A. TOMKINS verified buyer Date Added: Saturday 03 July, 2010
verified buyer
For: Action Army 6.03mm Extreme Precision Inner Barrel for VSR 10 (430mm)
Product Information:
This barrel was finished well, except for the rear part where the barrel enters and receives hop up. It was badly finished and actually CUT my bbs as they would fly throw the barrel. Absolutely killed my mediocre groupings on my VSR 10 clone until I ground the barrel 'window' so it wouldn't slice the bbs up. Even then, it was a rather wide barrel and I found it didn't fit the kind arms hop up rubber I had purchased although that hop up rubber was rather poor quality anyway.


-Finished well except for the rear
-Tighter bore (if that's what you're looking for)
-Stainless Steel (not cheap, flimsy aluminum)

-Poorly cut on the rear
-Wider than most barrels
by J. JONES verified buyer Date Added: Saturday 26 December, 2009
verified buyer
For: Action Army 6.03mm Extreme Precision Inner Barrel for VSR 10 (430mm)
Product Information:
A cheap tightbore that has a hugely low price
It wont change your groupings, but the bbs will fly quite a bit farther. Better than stock barrel, even if it is wider.
A cheap alterinative to a tightbore barrel for the less serious sniper (such as the ones that only deal with lpegs or mpegs, or plays with his friends, not at competitive events).

It adds a lot of range
amazing price

even with improved range, grouping don't change
wider inner diamater than stock barrel (mesured, a tube will go through easily & smoothly it that is too thick to fit in stock barrel)
by S. KOWALSKI JR verified buyer Date Added: Thursday 08 October, 2009
verified buyer
For: Action Army 6.03mm Extreme Precision Inner Barrel for VSR 10 (430mm)
Product Information:
It's really good but LONG VERY LONG I had to cut like 2 or 3 inches off and the barrel is thinker I had to hammer it all back into the outer barrel part it took me about 1hr 30mins to complete, but it was worth it my gun is crazy still have not been able to speed test it but so far it gos pretty far. Ow and i was just using .20 bbs

increase in accuracy

increase in velocity

increase in range

really long

wider then the stock barrel

a pain to install (put worth it in the end)
by H. FERNANDEZ verified buyer Date Added: Friday 25 September, 2009
verified buyer
For: Action Army 6.03mm Extreme Precision Inner Barrel for VSR 10 (430mm)
Product Information:
I decided to take my chances with the Airsoft GI brand hoping that their products are as good as their service and reputation. Man what a gamble....IT WORKS!!!!!

With the stock JG BAR 10 configuration, I installed this bad boy and it shoots like a miracle. Even with minimal hop up, I found that the BB's travel at longer distances before showing any signs of dropping. In fact I also found that in low wind conditions, I can compensate for deflection using the accessible hop up adjustment. I just add more hop for targets at longer distances instead of raising the crosshairs above the target for compensation (which is the right way to do it =P )

One thing to keep in mind, this is for the VSR 10 or BAR 10 - straight up versions. This inner barrel length WILL STICK OUT past the outer barrel length of the G SPEC versions. I was already aware of this and I wanted the extra length for the theoretical increase in accuracy and hide the excess using the G SPEC's mock suppressor. However, I had to use a precision lathe and an R size drill (0.339" by spec but measures 0.333" physically) to open up the G SPEC's outer barrel in order to create allowance for this inner barrel's 0.331" outer diameter. I do not recommend attempting this mod with a hand drill. If you did not comprehend the numbers or procedure that I just described, don't bother buying this particular inner barrel and attempt to make the mods for the G SPEC. Purchase the correct length for you G SPEC. Any and all modifications you attempt on your airsoft gun are done at YOUR OWN RISK.

-Miracle straight shots

-High grade, hi polished steel

-Longer than standard GSPEC inner barrel.

-Tweek fun! (if you're into machining and you have access to a decent tooled machine shop with a precision lathe)

-Otherwise a perfect fit! Awesome tolerances (ID and OD) great job with the machine work and packaging for shipping (overkill huge box with lots of stuffing to prevent damage during shipping)

-Too long for GSPEC (a CON if you don't have the right tools to modify)

-Airsoft GI is 1 hour and 40 minutes away from my house =(
Displaying 1 to 5 (of 5 reviews) Result Pages:  1 
Back Write Review

Add to Cart

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 598-1936
GI Tactical 9047 W Broad St. Suite # 5 Richmond, VA 23294 Phone: (804) 447-3334
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8771

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance

AIRSOFT GI Field Partners

Airsoft GI field partner D14 Airsoft

Copyright © 2017 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB0 Current Parse Time: 0.127 s with 26 queries