0 items
New Products
Restocked
Pre-Order Products
GI Shockers

Manufacturers

CQB Spotlight Field Spotlight Sniper Spotlight
CM050A Full Metal AK PMC Blow back AEG Airsoft Gun
[05803 / CM050A]
$192.88 $183.24
Displaying 1 to 6 (of 6 reviews) Result Pages:  1 
by B. BAGGETT Date Added: Friday 22 November, 2013
For: CM050A Full Metal AK PMC Blow back AEG Airsoft Gun
Product Information:
This gun is pretty good, I have had a few guns (not any high end ones) and this one was probably the best. The fps out of the box is around what asgi says, I don't own a chrono so I never tested it. I originally bought it in 2012 on Hitguns.com, they had the lowest price and I'm and airsofter on a budget. I do not airsoft frequently and so there is not too much wear and tear. The front sight did break off when it fell against my floor, though, and the rear sling mount broke off. However, the fps has cooled down to around 370 (it was chronoed when I was at a game) and you can see the bbs. The accuracy and range of this gun are great out of the box, as it wears down the range goes down but the accuracy stays constant. The hop-up on the gun is also great and is really easy to adjust. With my gun I use MAG ak-74 style/ plum mags with this gun, I tried using a drum mag with it, and I tried my buddies G&P mags in it (G&P MAGS will GET STUCK IN the MAG WELL). If you want to know the stock will not fold fully with a drum mag. On mine their was no roof to the mag well, so when putting the mags in there is an open space and a lip that the mag could get caught on. And If you don't know you could break the lip off of the mag, I did with my drum mag. I have had no performance problems with it though, the blowback still works also, and the selector switch comes loose frequently. It is not like most where you take off the cap and tighten the screw, for mine the cap is the screw, and there are no slots for a screw driver, you just have to use either your hand or a wrench. Also the stock wobbles some, I don't care but one of my friends bitches about it all the time.

I guess you might want to know about the cosmetics and internals. I have not opened the gearbox so I cannot tell you anything about it, but it is a cyma version 3 and they are tanks. The externals are mostly metal, except for the hand guard, flash hider, and mag. The rails are nice, their is no room on the side rail though. I am not sure what else to tell you. Out of the box it can compete with higher end guns, with proper maintenance it could stay competitive.

Overall I am very satisfied with this gun and would recommend it to anyone. I'm giving it a five because, for your money you can get everything you want out of it.

Pros:
Great out of the box, and good at holding up over time
The hop-up is shockingly good.
nice range and accuracy
Rails for customization
Takes MAG mags, for other airsofters on a budget.


Cons:
Front sight broke of in a fall
G&P mags get stuck in the mag well, and the stock does not fully fold with a drum mag in. (NO tommy guning it)
Selector switch is different
rear sling mount broke
by J. HOFFMAN Date Added: Wednesday 10 July, 2013
For: CM050A Full Metal AK PMC Blow back AEG Airsoft Gun
Product Information:
I've had the gun for some time now and fielded it stock at an FPS of 397 with .20 gram BBs. I haven't handled the gun with kid gloves so I've found a few problems in build quality that makes me slightly more hesitant. The receiver and stock is all steel, which is a huge plus personally, but the steel ends there. The front sight, gas block and sight block are all pot metal. Attaching a more modern flashhider required me to cut a piece of the muzzle off thanks to the the liberal use of glue required to make the orange tip 'permanent'. Perhaps with more patience I might have found another way but I only had hand tools. The gas block itself has already sheared in half after accidental force was applied to the cleaning rod, which also fell out on the field. I am currently looking to get them replaced with real steel Romanian AK parts and the broken parts are held in place with superglue. Luckily, it's invisible except on close inspection. Until that part gets replaced, I would not trust the bayonet lug with a GP-25 or 30. As a random note, the M9 rubber bayonet does not fit the AK style bayonet lug. The sling point is another concern. Compared to the rest of the gun, it is very flimsy and while it hasn't failed, it has warped with the weight of the gun on a 1pt sling system. The folding stock is not perfectly consistent and occasionally folds on the fire selector switch when the gun is in semi-automatic. This was easily fixed with cutting the finger plate of the lever slightly so the stock would not get damaged. The issue was maybe half an inch of metal but at the cut portion, rust has already appeared. The pistol grip is a VERY specific design and most pistol grips for AKs do NOT work on this gun. I attempted to swap out the grip for a JG grooved finger grip but there was no chance of it fitting. Same with a SAW pattern grip in store, even after professional adjustments to the grip itself. Due to the receiver's design, loading a magazine into the gun is more difficult than with Marui style gun. The magazine well isn't as forgiving and does take more practice to become proficient. I've noticed there is a pin holding the receiver and the barrel assembly together that moves its way out. A punch or hammer tapped screwdriver will push it right back into place.

But in game, the Cyma was outperforming most other guns on the field in terms of range and power. Accuracy and grouping left something to be desired but the barrel is still stock so that is to be expected. Due to the gun firing exactly 397 and field limits at 400, I was advised against a tighter barrel or risk having to downgrade the spring. I currently use .25 BBs but am going to start testing with heavier because the hopup is maybe on a quarter, if that, to maximize range and consistency and I am confident the gun can handle heavier.

Even with the quality problems of the pot metal and the annoyingly specific parts here or there on the gun, I would fully recommend this gun to any mid-level player looking to step up to a modernized AK platform and willing to put some TLC into it and fix some manufacturing defects.

Pros:
Major pro over all other AK platforms: Folding the stock does not get in the way of adding a claw mount over the receiver cover for additional optics

Steel Receiver
Simple to fold stock
Power just shy of local field limits (397fps w/ .20)
Adequate rail space for optics, foregrip, light/laser and bipod
Stock does not get in the way of full face masks
Unique sounding blowback system

Cons:
Pot metal gas and sight block
Flimsy sling attachment point at base of stock
Slight manufacturing defect in folding stock and fire selection lever lining up
Unique pistol grip attachment point
Cleaning rod not secure
Loading requires proficiency with the AK platform (only a con to the inexperienced)
Receiver body pin jiggles out from use
by T. ACUNA verified buyer Date Added: Thursday 11 April, 2013
verified buyer
For: CM050A Full Metal AK PMC Blow back AEG Airsoft Gun
Product Information:
I bought the airsoft gun for my PMC/Mercenary loadout. It's very solid well made, I finally shot it and used it to some extent just performing tactical maneuvers and I was very impressed. I bought a mini foregrip and a red dot scope for it, to customize the gun. I haven't used it in a skirmish or game yet. But when I do I'll write another review.

Pros:
Great fps, shoots very far and very straight after adjusting the hopup which was quick and easy
The foregrip and red dot scope help me to stabilize and acquire targets easier which for me is awesome!!!

Cons:
The only con I've ended up having is that the stock battery that comes with it is very week. I charged the battery one day then used the gun the next day and within about an hour or so the battery died.
by S. DO verified buyer Date Added: Friday 12 August, 2011
verified buyer
For: CM050A Full Metal AK PMC Blow back AEG Airsoft Gun
Product Information:
Great gun very powerful, one of the best ak's from CYMA

Pros:
Powerful
Full metal
feels good to handle(thats what she said)
the ability to add scopes and such


Cons:
battery kinda hinders the blowback
the charging handle kinda jams( alittle if you dont lube it a bit)
blow back scratches the gearbox( not a bit deal though just a tiny scartch)
by J. PRUITT Date Added: Friday 17 December, 2010
For: CM050A Full Metal AK PMC Blow back AEG Airsoft Gun
Product Information:
Please note, this gun is given 5 out of 5 based on the "Class it is in" pro-line guns will be far superior that what is found here.

Internally it features a full metal gear box, standard "top wired" kit, soldered motor (bleh) and full metal 7mm bushings no bearings.

Gears are steel and cut well, standard ratio. Piston + Piston head made out of a low quality polycarb, the piston head and spring are connected so its a bit rough on consistency. Spring guide is not the old clear plastic, new poly carb no bearings.

Barrel and Bucking are not sealed together with lock tight, bucking has "v cut" in it to allow for a better grip on the bb. Its a nice improvement.

Metal is heavy but solid. It isnt great but if you wanted more quality, you'd pay more. Grips are made of a low density fiber. Nicer than abs plastic, not as great as G&G or CA grips...

I hate the stock, but thats just me. It is solid, clicks into place - doesnt fly around when closed.

Selector plate is standard, it will come lose.

Blow back is AMAZING but you need to make sure your battery is placed properly. Wires will jam the blow back if not careful. But anyways, this blow back system is much nicer than the full wood version. It is lighter, takes less power, and provides the same amount of "cluchink!" as the big heavy weight blow back system the full wood ak provides.

Pros:
Blow Back functionality is simple and less stressful.
Battery space for a 9.6
Gear box build - easy to upgrade
Strength of internals is a vast improvement over older cymas
Metal body
Realistic flash hider and design.

Cons:
Battery and charger are not that great, never are.
The non-spinning spring due to being attached to the piston head.
battery can jam blow back
by Y. JACOBSON verified buyer Date Added: Friday 23 July, 2010
verified buyer
For: CM050A Full Metal AK PMC Blow back AEG Airsoft Gun
Product Information:
This gun is a BEAST!!! had it for 2 months and still shooting strong.the RIS is pretty good but you should buy a top rail ontop of the reciver. since of the EBB it will be a bad idea to make this gun a support weapon and this gun is really accurite up to 200 meters!! i put a bottle rocket where the unjamming rod was and it didnt work to well, but all and all a great gun and wont let you down!

Pros:
Pros:
Full metal
Mags hold alot of bbs
The wire stock
ROF on 9.6v
400+ FPS
RIS
Scope mount already on
U CAN SHOOT BOTTLE ROCKETS OFF IT!!!!

Cons:
Cons:
Black paint scratches off pretty easliy
Sling mount really weak
the bottom rail for grip
Mag wobbles(eletric tap fixes problem)
Price?
Not that user friendly
Stands out sometimes(so you will be shot first)
flash hider is hard to take off
some optics wont work well on this gun
Displaying 1 to 6 (of 6 reviews) Result Pages:  1 
Back Write Review

Add to Cart

Copyright © 2014 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB5 Current Parse Time: 0.414 s with 26 queries