0 items
New Products
All Airsoft Guns
Pre-Order Products
GI Shockers

Compare Products


CQB Spotlight Field Spotlight Sniper Spotlight
Airsoft GI FMG4-A5 13" Next Gen. DMR AEG Airsoft Gun
Displaying 1 to 8 (of 8 reviews) Result Pages:  1 
by E. BURK verified buyer Date Added: Saturday 31 January, 2015
verified buyer
For: Airsoft GI FMG4-A5 13" Next Gen. DMR AEG Airsoft Gun
Product Information:
Really good, solid and full metal. The range is amazing and I can hit a lamppost accurately at 150ft. The stock magazine is a little wobbly but most others are not. Would recommend! However I did have to have it rma d because the hop up broke. Other than that though, the gun is amazing.

Full metal
Hits hard
Sexy gun

Hop up broke but got an rma
FPS(above regular rifle limits on my field, but they accepted ifpt as a sniper)
Other than that none!
by J. CARMINATI verified buyer Date Added: Saturday 25 October, 2014
verified buyer
For: Airsoft GI FMG4-A5 13" Next Gen. DMR AEG Airsoft Gun
Product Information:
Nice DMR, quick note if you go to take it apart you need to press the bolt release when separating the upper and lower receivers. This thing is solid, it has no wobble anywhere. The crane stock is a little smaller then some of the others, I use big nimh so im switching it to a full stock. It has a real buffer tube so make sure you have an ar wrench. I haven't found one that will work yet.

-full metal
-509 inner barrel
-bolt catch and release (just for show)
-good accuracy and fps out of the box ~390-400 with .25g bbs

-there isn't much that I don't like about it other then trying to find a full stock is a pain
by T. BECKWITH verified buyer Date Added: Monday 02 June, 2014
verified buyer
For: Airsoft GI FMG4-A5 13" Next Gen. DMR AEG Airsoft Gun
Product Information:
Time to get a magnified sight because this gun has some range.
I bought this gun in February and waited until May for this to arrive and it was defiantly worth the wait. I have used this gun once at my local field and was vary happy with it. It shot a nice 371fps completely stock using .25's and was reaching out very far.

Nice FPS of 371
With .25's I could shoot trough leaves and small amounts of foliage
Solid metal and not going to break if you drop it
Bolt release has a nice metal sound and is ideal for fine tuning your hop-up

Has noticeable left and right deviation after about 100ft. and I would suggest a tight bore barrel
Heavy and you will find yourself not holding it up a lot because constantly shouldering the gun would be a pain
Due to the weight and length of this gun you will nee a short and strong sling to hold this

In my opinion the pros heavily out weigh the cons and all the cons i can live with and that is why I would if I could rate this gun 6/5
by D. SHAW verified buyer Date Added: Thursday 30 January, 2014
verified buyer
For: Airsoft GI FMG4-A5 13" Next Gen. DMR AEG Airsoft Gun
Product Information:
This is an amazing airsoft gun! This is just about the best one I've ever owned, and for such a decent price. From stock to orange tip, this gun is solid quality. The barrel is ribbed, which you can't really see from the image, but it's nice. The rail system is also really nice, and looks even nicer with the rail covers on it. The upper and lower receiver is made of full metal, and you can feel the quality when you pick it up -- this thing has some weight. The one thing I didn't really like about this Airsoft gun was the real-steel setup on the buffer tube -- meaning this buffer tube won't be compatible with most of your Airsoft sling points, stocks, or adjustments. It will also require a real-steel buffer tube wrench to take it off.

This gun also came with a flashmag, which I must admit is a really nice addition. I also liked the AirsoftGI trademarks that were laser-sketched onto the receiver.

High quality
A great rail system
Nice mag included
Plenty of rail covers
Functional bolt catch
Great performance out of the box

Real-steal buffer tube setup
It's a pain in the ass to reassemble the functional bolt catch if you disassemble this gun
by K. CHEELY verified buyer Date Added: Saturday 18 January, 2014
verified buyer
For: Airsoft GI FMG4-A5 13" Next Gen. DMR AEG Airsoft Gun
Product Information:
Really good gun, got it for my B-day back in September and it has not failed me since. I have played a handful of games with it since and everyone who has been hit by it says it stung for ten minutes or so. I plan to go to Operation Reclamation II with it and hopefully it won't let me down.

incredible range
feeds well with all my mags (D-boys and the Lonex one that comes with it)
comes with a Lonex hicap flash mag
accurate evan at long range
comes with twenty rail covers
comes with flip-up iron sights
crane stock

I don't really have any complaints about the gun except for the stock can't fully retract with my battery though.
by D. SHAW verified buyer Date Added: Wednesday 18 September, 2013
verified buyer
For: Airsoft GI FMG4-A5 13" Next Gen. DMR AEG Airsoft Gun
Product Information:
This gun is beautiful, words cannot even explain it. I thought the pictures looked amazing, but when I opened the box I felt like someone in a movie, when the light shines on their amazed face. This gun is nice and heavy, while also being decently balanced. Some guns are far too front heavy, while this one somehow maintains a rather even weight throughout. Some may find the weight a con, but for a DMR, it doesn't really matter as much as it would if you were another class. The RIS is super long, giving you enough space to put every attachment on Airsoft GI's website on it and still having enough room for a scope. The crane stock is nice, pretty average in my opinion. It wasn't a stock that blew my mind like the rest of the gun did, but that's okay. The battery goes in the crane stock, so I couldn't complain. The magazine that comes with it is a standard M4 magazine, but it's extended about an inch, which really stumped me until I learned that it was longer by comparing it with another M4 magazine. The flash hider has a small pin or Allen screw in it, which was kind of a bummer because I'm not sure if I can get it out if it's a pin. One small thing that I noticed was that the upper receiver moves forwards or backwards about half a millimeter if you grab the RIS or pick it up by the RIS. I wouldn't have noticed it if it didn't make a small clicking noise whenever it happened. I'm not sure if it's a pin that's a sliver too small, or what. Other than that, this gun is phenomenal.

- Heavy
- Easy to hold
- Wired to the back (some people like that, some don't)
- Long barrel (with a suppressor you could go up to 715mm)
- Solid feel
- Great iron sights (has a latch that holds down the back sight [spring operated])
- Comes with a larger than normal M4 magazine
- Nice logos (Airsoft GI all the way)
- Full Metal construction
- Lock-back bolt catch
- Operation bolt release
- Nice trigger
- Decent crane stock

- The 0.5mm wobble I get on the upper receiver (granted it's probably not anything to be worried about, but now that I've seen it, it cannot be unseen)
- Pin holding in flash hider (a pain to remove)
- Pistol grip isn't my personal favorite
- Nothing else, it's mostly personal issues

This was worth every penny! I cannot wait to upgrade this into the terror of the field!
by H. CRUDELE verified buyer Date Added: Wednesday 14 August, 2013
verified buyer
For: Airsoft GI FMG4-A5 13" Next Gen. DMR AEG Airsoft Gun
Product Information:
I have recently purchased this gun and I must say it is amazing.

the flash mag
I absolutely love it!

the only thing is that the high capacity mags I had doesn't work that well with it
by D. MATTEO verified buyer Date Added: Tuesday 23 April, 2013
verified buyer
For: Airsoft GI FMG4-A5 13" Next Gen. DMR AEG Airsoft Gun
Product Information:
This is a wonderful gun. VERY solid. Beautiful exterior. My motor was a bit low, and the front sight post was crooked, other than that this gun has been flawless. The stock is a bit peculiar. You need a real steel AR stock wrench to take it off instead of removing a phillips head from inside the buffer tube. This means you need a specific tool to disassemble the gun before you even touch the gearbox. You also can only wire the battery to the back of the stock, as the would-be cut-outs for the front are solid in this case. Performance is unmatched. I'm hitting a man-sized target, every time, outdoors at about 70 meters without upgrade. Nice hop-up unit. Active bolt catch. This replica is not small. Stock fully extended, it is about 3" shorter than my L96 and about 7" longer than my full-sized AK47. I love the weight. i believe it was 9lbs (though i have a scope and bipod so dont quote me). Blistering muzzle velocity. Anyone hit with this inside 50ft is likely unhappy. The quadrail is gorgeous. Very nice solid flip-up sights. Comes with a Flash mag, rail covers, obviously crane stock.

Beautiful exterior
Nice hop
Strong metal body
Full metal gearbox
Flip-up sights
Crane stock
Flash mag

Crane stock
Displaying 1 to 8 (of 8 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 869-0671
GI Tactical 100-A North Providence Rd North Chesterfield, VA 23235 Phone: (804) 320-2535
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8779

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance AIRSOFT GI is an ASF Member

Copyright © 2016 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB0 Current Parse Time: 0.469 s with 34 queries