0 items
New Products
All Airsoft Guns
Pre-Order Products
GI Shockers

Compare Products


CQB Spotlight Field Spotlight Sniper Spotlight
Airsoft GI Magpul CQB Airsoft Gun
$180.00 $158.40
Displaying 1 to 6 (of 6 reviews) Result Pages:  1 
by C. MURDOCK Date Added: Tuesday 19 January, 2010
For: Airsoft GI Magpul CQB Airsoft Gun
Product Information:
wolud i b able 2 put a red dot sight or scope and remove front sight


by T. LOVERING verified buyer Date Added: Saturday 26 September, 2009
verified buyer
For: Airsoft GI Magpul CQB Airsoft Gun
Product Information:
I got my version of this gun with the full metal version of the JG s-system, since AGI was continuously out of stock on the plastic version. While it cost me an extra $90, I think it was well worth it, making for a much more robust gun. It is solidly constructed, shoots hard, and comes with a mosfet pre-installed.

The addition of the Magpul parts gives the gun a very distinctive look, to the point where some people haven't recognized it as an M4. Getting the flash hider off will give you some heartburn, but with the help of my dremel I was able to remove it. The Socom Noveske hider adds to the look, but I've since replaced it with a stubby "silencer".

I've also replaced the front sight with a fold down version since it gets in the way of any optics you want to mount. I'm also in the process of adding the Magpul PTS UBR stock, although it's proving to be a headache. You need to saw off part of the rear receiver tube, since it's so long, and with the mosfet in the rear wiring, there is only room for the very smallest 7.4v lipo.

Overall, this is a great gun, that people will be afraid off.

Great construction (if you get the full metal version)
Unique looks
Great value even at $275
Surprise mosfet

Front sight is a pain
Stock required some tightening
by J. ADAMS verified buyer Date Added: Thursday 06 August, 2009
verified buyer
For: Airsoft GI Magpul CQB Airsoft Gun
Product Information:
when I recieved this rifle I was blown away by its performance. When I purchased the rifle its fps was listed as 330-350, when I read the chrono slip that comes packaged with the rifle and see 433 a full 100 fps higher than the original listing CQB was the last thing on my mind. Moving on, the battery is a standard nunchuck 8.4v 1500maH. The rate of fire for this rifle is astonishing for an 8.4v, almost = to a 9.6v on an ECHO 1. Warning the battery is an extremely tight fit, once it's in it isn't coming out. If you plan to install the shown flashider or any other barrel extension, you will hate this gun for about 10 min then go back to loving it. First there is the standard allen screw on the bottom, as if that wasn't enough there is a set screw on the right side and industrial strength glue, IN ALL SERIOUSNESS BE CAREFULL the set screw will destroy the threading if you do not either remove it or drill through it and the outer barrel (this has no adverse affects on the threads if done right).

high fps
high rof
very accurate
great hop up
functional charging handle and dust cover
upgrades to full metal for $95 (in my case it was a necessity, they ran out of the regular base gun)

battery is a tight fit
orange flashider is difficult to remove to install amplifier
paint scratches off easily
waiting, as most of these parts are popular (i.e. MOE handguard, KX3)
finding the handguard rails before they sell out is near impossible
by J. VELADA verified buyer Date Added: Tuesday 07 July, 2009
verified buyer
For: Airsoft GI Magpul CQB Airsoft Gun
by E. YOST Date Added: Saturday 04 July, 2009
For: Airsoft GI Magpul CQB Airsoft Gun
Product Information:
To start off this gun is amazing. I do have a few problems though that can be easily fixed the stock would not stay fixed in place on notches (Can be fixed by getting into the screw and tightening it I still have to find out how though) As for the Silencer that comes with it I have not has a chance to put on. They also sent me two different silencers one a full metal m4 one and the Noveske KX3 pictured. I need to go out and buy a small allen wrench to take off the plastic orange flash hider. Then I may call airsoft gi and ask them how they would put it on. Very minor problems that don't affect the brilliance of this gun at all.

Almost full metal (hard, durable plastic)
Large battery space.
Crane Stock
Sights are good
Overall awesome
Good RoF

Somewhat loose stock(just need to be tightened)
Not many cons then again I'm not a complainer
by S. MONFORT verified buyer Date Added: Monday 22 June, 2009
verified buyer
For: Airsoft GI Magpul CQB Airsoft Gun
Product Information:
For a low priced AEGs this ASGI custom seemed to fit the bill. It had just enough flare to it to make it stand out from the crowd, but kept with a solid clone base and reliable internals. Unfortunately the AEGs was far less illustrious than expected upon arrival. The parts that were described did not come with the AEG and did not come assembled as described. The base is your standard JG M4 CQB and is all in good shape, but what was extremely dissapointing was the Flash-hider that was said to come with it. First off, note that this is not the Madbull version, but the Socom Gear one...so dont expect to adjust the amplification of the flash-hider, but I was aware of that prior to ordering.

The main problem arose because the AEG came with a glued in orange flash-hider. If you remove the Flash-hider to install the replica Noveske, you void all warranties. I thought to myself, "I paid for the that Flash-hider, so I want to use it" and I removed the glued in flash-hider which left the threading in bad shape with caked on glue and stripped threads. At that point, that is considered a modification and that too voids the warranty. All this would also have been fine with me since having been a 10 year airsoft veteran I was aware that warranties aren't worth the paper they are printed on most of the time, but when I tried to install the Amplifier, it turns out that it does not fit the JG barrel and will not screw in at all. The orange safety flash has not only glue and the small screw to fasten it to the outer barrel, but also a small metal rod inserted which make removal a very difficult task without total destroying the threading on the rifle barrel.

So now I have an AEG which I was forced to void warrantied on in order to create the rifle they advertised, which I cant create because ASGI forces you to void any warranties which release them from any liability and a Flash-hider which does not fit and cannot be returned because a) it had to be opened to try to install and b) they don't accept any returns on accessories, period.

On a side note, the Flash-hider advertised in both the pictures and in the description was a Noveske Kx3 replica, but they senf a KFH one instead. If you wish to have the rifle described, you will need to set some extra cash aside for a new outer barrel and make sure they send you a Kx3 Amplifier rather than the KFH model.

Now, the AEG itself is quite nice and it seems very well built. Nothing feels loose nor poorly fabricated. I would easily venture to say that the plastic body of the JG actually feels sturdier than a TM one and I would have no reservations of putting a plastic AEG to the test in the field or in a CQB environment. The Magpul mag gives a bit of a hi-tech look to itand the PTS MOE foregrip changes the weapon's footprint enough were it still feels like an AR-15, but gives it a totally unique appearance on the field.

Low price.
Unique styling with PTS foregrip (the foregrip makes it resemble something that would have come from a FN plant...pretty neat)
A Magpul midcap is preferable over the hicap, especially since many group have hi-cap restrictions these days.
Very clean JG design and feel very sturdy...much more that alot of the other M4s i've owned in the past (CA, TM, and ICS)

Battery is a bit difficult to set in stock.
Glued in orange flash hider makes it nearly impossible to attach the Amplifier one.
Noveske KFH amplifier is sent instead of KX-3 as shown.
Be prepared to buy a separate outer barrel to truly create this AEG.
Displaying 1 to 6 (of 6 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 869-0671
GI Tactical 100-A North Providence Rd North Chesterfield, VA 23235 Phone: (804) 320-2535
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8779

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance AIRSOFT GI is an ASF Member

Copyright © 2016 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB0 Current Parse Time: 0.564 s with 24 queries