0 items
New Products
All Airsoft Guns
Pre-Order Products
GI Shockers

Compare Products


CQB Spotlight Field Spotlight Sniper Spotlight
Airsoft GI Combat Machine M4 RIS AEG Airsoft Gun
Displaying 1 to 6 (of 6 reviews) Result Pages:  1 
by G. BAKER Date Added: Wednesday 30 July, 2014
For: Airsoft GI Combat Machine M4 RIS AEG Airsoft Gun
Product Information:
This gun is excellent. I use it mainly for cqb/field and it performs excellent. I ended up putting a magpul stock, a magpul rail, and a replica aimpoint. With Theese upgrades It performs even better.


The charging handle is not functional.
The mag is a little wobbly
by L. PETERSON verified buyer Date Added: Tuesday 24 August, 2010
verified buyer
For: Airsoft GI Combat Machine M4 RIS AEG Airsoft Gun
Product Information:
Back with some combat experience with this gun! still absolutely amazing! you can't go wrong with it. the iron sights are good when you are looking at the gun but they are not that good during combat. they are very hard to see down because they are so small. i would suggest getting a good red dot or magnification scope for this thing. rails are amazing. bottom rail is a bit wobbly but that is because you can easily remove it to get at the fuse container. stock is flawless. goes in and out smoothly and easily during a battle and has six positions all as firm as the next. the magazine mags enough noise to wake a hibernating bear though and there is no way of fixing it. you just got to live with it. unfortunately you can't remove the front site so you have to mount scopes either on an optics riser or on the carrying-handle. the selector switch is very smooth and locks in well. also this gun is very very accurate. good for field action at 50-80 feet. you can only mount a 2-point sling on it unless you get a 1-point adapter for it to mount on the base of the stock. the dust cover has loosened up and is easier to get open now. still would have prefered the charging handle to open it though. hop up works great too and none of the internals have broken yet, but what more can you expect from a G&G? PEQ box is noisy if you don't pad it because the battery moves around in it. also the ROF is pretty decent with just a 8.4V battery. if i had to guess at it i would say 10 Shots/Second. it is a custom so it does take a while for processing.

Looks menacing and professional
450 round mag*
Sturdy rails
PEQ box
Not that long of a trigger pull
Pistol Grip
great internals

Loud Mag
non functional charging handle
fixed front sight
hard to see through sites in battle

Highly suggested gun. has served me well and is easy to use when you know how to use it. not hard to learn either
by L. PETERSON verified buyer Date Added: Monday 15 March, 2010
verified buyer
For: Airsoft GI Combat Machine M4 RIS AEG Airsoft Gun
Product Information:
Great weapon. i would go into any battle with this rifle. it is a G&G and has amazing build quality. it is plastic, but when people hear plastic, they think "oh it's not as strong and is going to break easily". not this gun! it seems like it is a fiber type plastic because it is so strong. but remember it is plastic! if you trip do not really on this thing to break your fall or anything! because it will break!
Metal: RIS, stock pole (don't know the technical term, but the rod your stock goes onto) barrel, iron sights
Plastic: Upper/lower recievers, grip, LE stock, flash hider, carrying handle
Amazing for such a good price! first time i shot it i hit the can i was shooting at from 30 feet away almost every time i pulled the trigger! and that is without even dialing it in!
yes it does need a PEQ box but i personally like PEQ boxes. just not this one. a nob broke off the instant i pulled it out of the plastic. but it stays on nice, is very easy to use, and does it's job very nicely. just wish it could be a little better build quality.
FPS is aboout 350. perfect numbers i think, cuz it is not to high for regulations

metal where it needs it
weight (due to plastic)
durable plastic
rails (not a trace of wobble in it!)
Mag is 450!!! amazing mag
the whole thing!

the dust cover is hard to get open to get at the hop up. you need to pry it open. I just use a flathead screwdriver. Just keep it in a pouch in my vest
the durability of the PEQ (not bad but i have seen better)
I think the flash hider is glued on but i haven't tried that hard...
disfunctional charging handle (I could care less but there are some people who really care)

the pros heavily outway the cons on this thing! I would get it no doubt! very cheap pricing and very high quality!! everything I expected from a G&G!!!
by L. MOORE verified buyer Date Added: Friday 31 July, 2009
verified buyer
For: Airsoft GI Combat Machine M4 RIS AEG Airsoft Gun
Product Information:
First off, AirsoftGI service was great and detailed. Thanks you guys!

This gun is a beasty CQB weapon. AirsoftGI tested velocity was 335 FPS, and I would say it shoots around 19 to 20 rounds per second with G&P 9.6V 3300mAh PEQ style battery. Although the gun is plastic construction, it is extremely sturdy. Looks like it is going to need heck of beating to actually break this gun. There are slight wobbles on places though. Orange tips are easy to take off. Just blow dry it for a few minutes and stick a screw driver through the bird cage and simply unscrew it. It may require some strength, but it's really not that big of a deal. Range is pretty decent; about what it AirsoftGI says - 120feet - and groupings are quite tight. I got 5 inches grouping at 60 feet, standing up shot. No fancy aiming skills were used. I simply stood on the porch and shot with no concentration of whatsoever. With this accuracy, you can sure hit a human sized target at a hundred feet.
As far as the maintenance goes, it is pretty simple. I'm not going to bore you with how to clean the barrel. You ought to know how. To lube the internal, just pop out both body pins and push forward the upper receiver about half an inch, then very gently lift it up from the lower receiver as if you were disassembling a real M4. Be very cautious because there are wires that run from the R.I.S handguard to the motor. If you are not careful, you may actually end up ripping the wires. After you lift up the upper receiver from the lower receiver, you should be able to see a little hole on the left side of the gearbox. Take your silicon oil and spray right amount into the hole and fire the gun a few times on semi automatic. Be careful though, the silicon oil may spray back out of hole on your face while you're firing :P

That's about it. Five stars.
This gun will not disappoint you.

P.S. This gun uses a PEQ style battery; therefore, the wires are exposed. I strongly suggest wrapping around the exposed wires with electrical tape to prevent ripping and tearing.

Not heavy - plastic construction
Extremely sturdy
Decent range
Excellent rate of fire
Easy maintenance
USMC logo
Crispy fire seletor
No barrel wobble

Wobbly magazine
Wobbly LE stock
Slight robble on the rails - although barely noticable
PEQ box - making the gun front heavy
R.I.S can be difficult to work with
Charging handle not functional
by A. COHEN verified buyer Date Added: Wednesday 29 July, 2009
verified buyer
For: Airsoft GI Combat Machine M4 RIS AEG Airsoft Gun
Product Information:
W. CRAFT said it all, so I hope you'll take your time to read his review. I don't want to bore you with too much detail but this gun is pretty kick ass. When I took it out of the box I thought they sent me a full metal one because it is quite heavy. My father had picked it up and told me it weighed the same a real m4/m16 (He was in the army for Israel). All in all though I love this gun so far and hope that you will buy it too.

-Great Accuracy
-Great feel
-Great RIS system
-FPS is like 350
-Doesn't hurt too much but still stings
-Retractable stock is very comfortable
-Great ROF with a 9.6 battery (When I show anyone they go "Oh Crap!")

-Battery will not fit in hand guard so I have to use the PEQ box
-Slight Magazine wobble (Barley noticeable)
-BB's tend to fall out of the mag when I release it but it is only like 5 BB's...
by W. CRAFT verified buyer Date Added: Tuesday 24 March, 2009
verified buyer
For: Airsoft GI Combat Machine M4 RIS AEG Airsoft Gun
Product Information:
I have owned the ASGI Custom G&G CM M4RIS for about a month now and it has seen a few skirmishes in that time. It must be said that it is a truly excellent AEG. It features the same gearbox as the proline at exactly half the cost. The plastic body is a black nylon/plastic body... not gray ABS plastic like the CA, JG, E1, and TM competition. The range is excellent, and as verified by ASGI techs it does come with a tighbore barrel.

This specific ASGI Custom model comes with a full metal 2-piece RIS foregrip and a DBoy PEQ box. It does not come with a vertical foregrip or panel covers. Externally it is durable, especially the body. There is no barrel wobble as seen with TM variant M4s, although there is a slight barrel tilt issue that will not affect accuracy whatsoever. There are no receiver gaps, loose stocks, rattles, or wobbly barrels that other models may have. The included hi-cap feeds very well... one of the better ones I've used.

Overall I highly recommend this over any other sportline currently on the market for its external build quality and internal reliability. You honestly cannot find a better deal right now. I will add that I recommend a 9.6v battery for this AEG if you are looking for very nice ROF or are looking to upgrade it later. I'm running an 8.4v 1500mAH battery with decent ROF but it will last the day; I doubt it could pull a stiffer spring.

-Build Quality and appearance
-No notorious barrel wobble
-Excellent gearbox and internals
-Tight bore inner barrel
-Easily adjustable hop-up
-Versatility in terms of accessories
-Moveable charging handle and forward assist
-450 Round HiCap

-Slight barrel tilt issue
-Wiring appears to be of a very small gauge
-Plastic body (although durable)
-No metal flash hider included
-No battery/charger included
-Moderate rate of fire on an 8.4v mini battery
Displaying 1 to 6 (of 6 reviews) Result Pages:  1 
Back Write Review

Out of Stock

Airsoft GI 21077 Commerce Pointe Dr Walnut, CA 91789 Phone: (909) 869-0671
GI Tactical 100-A North Providence Rd North Chesterfield, VA 23235 Phone: (804) 320-2535
GI Tactical TX 4720 Highway 121 Suite # 160 Plano, TX 75024 Phone: (469) 362-8779

AIRSOFT GI SUPPORTS Paralyzed Veterans AIRSOFT GI SUPPORTS Wounded Warrior Project

AIRSOFT GI SUPPORTS American Red Cross Airsoft GI Walk-In Store is a drop off location for Toys for Tots

Airsoft GI is part of the NRA Business Alliance AIRSOFT GI is an ASF Member

Copyright © 2016 Airsoft GI
Airsoft GI CAGE CODE   See Airsoft GI Reviews at Bizrate.com
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.
Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.
By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.

DB0 Current Parse Time: 0.353 s with 21 queries