|JG Full Metal M4-A1 AEG Airsoft Gun
Polymer Furniture Carbine Retractable Stock High Cap Magazine M4A1 M4
Use the Drop Down Menu below to add items directly to your cart. They include items like the accessories pictured above and other related products.
- Airsoft GI Videos
- Product Reviews
- Questions & Answers
The JG Full Metal M4 is a phenomenal new gun from JG. Forget the JG you think you know, they've turned over a new leaf and have broken into the market for high quality airsoft guns. The internals of this gun are the same reliable, hard hitting internals that are equipped in the JG Enhanced AEGs. The exterior of this M16 can only be described one way, solid! The one piece outer barrel does not wobble at all. The hand guards have a realistic texture and sit very snug inside the TM Style delta ring for an unwavering font hand platform. The Full Metal Body has a very stylish matte black finish. Finally the LE stock is very well made, which equates to higher stability, and more accuracy. With the help of the included MOSFET the gearbox operates like a well oiled machine, smooth as silk. This is without a doubt the best bang for buck full metal M4 on the market!
Muzzle Velocity: 400+ fps
Magazine Capacity: 300 rounds
Package Includes: Manual, Magazine, Battery, Charger, Cleaning Rod
Adjustable LE style stock
Full metal construction
One piece outer barrel
- Red dot sight not included
|Magazine Capacity||300 Rds|
|Fire Mode||Safe, Semi, Full|
|Package Includes||Gun, Manual, Magazine, battery, charger, Cleaning Rod |
|Primary Build Material||Metal|
|Outer Barrel Length||14.5in|
|Stock Type||LE Stock|
|Handguard||Standard M4 Handguard|
|Sight|| Standard Front Triangle Sight and Rear Carry Handle Sight|
|Overall Length Extended||35in|
|Overall Length Retracted||31in|
|Gear Box||Ver. 2 Metal|
|Cylinder Head Type||Plastic|
|Cylinder Type||Type 1|
|Piston Head Type||Plastic|
|Piston Type||Nylon Fiber|
|Air Nozzle Type||M4|
|Tappet Plate Type||Ver. 2|
|Spring Guide Type||Metal|
|Gear Set Type||JG Standard Gear|
|Switch/Wire Type||M4 Front Wired|
|Selector Plate Type||M4|
|Cut Off Lever Type||Ver. 2|
|Anti Reverse Latch Type||Ver. 2|
|Motor Type||JG High Powered|
|Hop Up Type||Plastic|
|Inner Barrel Length||363mm|
|Sector Gear Clip||Yes|
|Quick Spring Change||No|
(see all 18 reviews) or (Write a Review)
|   2014-02-25 20:01:21|
Z. BOND verified buyer
For: JG Full Metal M4-A1 AEG Airsoft GunProduct Information:
Ok I will say this is one of the nicest stock guns I've bought for under 300 got it on sale for 180 chrono it at 405 fps with .2s runs great has good distance.... I'm throwing a tbb in it along with 13:1 shs gears and a better piston head only con is the wiring in the mag well get in the way had to tuck it up better than the manufacture did
Good fps (recomend dumping a few mags before you field it)
Full metal contruction
Good motor for a stock one
Piston is good but recomend upgrading the head
M110 spring stock
Wiring in mag well get in the way
|   2013-11-18 13:56:49|
J. KOPYSCIANSKI verified buyer
Just received the gun and was very impressed with the build quality. Unfortunately the BBs I ordered did not arrive with the gun so a test is yet to come. Very realistic out of the box though!
Solid build with a very realistic look and feel.
Packaged very well compared to other brands I have purchased
All Metal receiver and metal magazine
Was out of stock when ordered and had to wait a few extra weeks.
An extra Magazine would make this the perfect starter.
Battery connections look sort of sketchy. May not hold up too well.
|   2013-10-15 01:06:17|
I bought one of these from a boneyard sale. I was suprised when i opened it up to find everything well intact. All that was wrong was the hop up rubber was ripped a bit. Oh well, cheap replacement part.
When the gearbox was opened i found a lot of nice surprises outside of the high density metal body. The gears were high strenth, there was a sector gear clip installed on it as well.
The cylinder head is polycarb, but that's another cheap upgrade. I would recommend upgrading to a magic box aluminum cylinder head.
The piston was a surprise as well, it was a high strength polycarb body with steel teeth. Needs a better strength head though. I would recommend an SHS aluminum piston head.
The JG motor is too good to replace or upgrade. The motor in my other JG has lasted over 3 years now and still shoots everything.
The wires were a nice set. Silver plated copper, but it's all good quality. Front wired with a mosfet installed, good for high power lipo batteries.
The nozzle is hard polycarb with no o-ring. Still has a good air seal. Recommend replacing with an echo 1 max air nozzle or SHS aluminum airnozzle just for strength.
Tappet plate is kind of an odd design, but gets the job done.
The cylinder is smooth, almost like it was anodized. One port present for air flow and still does its job well.
Haven't done any range shooting yet, but the airflow is powerful, i would guess about 380-400 fps with a rate of fire i would estimate at 12 rounds per second with a 9.6v nimh.
High strength internals
Bang for buck
Tokyo marui compatible
Nice wire set
Front wires get in the way of mags at times.
|(see all 18 reviews) or (Write a Review)
|This product was added to our catalog on Thursday 25 June, 2009.
People who bought this item also purchased: