Condor Outdoor Battle Belt Large (OD)
[03641 / 211-001-L]
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Description:
The Condor Outdoor Battle Belt is designed to be a light weight, low drag replacement to a full chest rig or vest. There is enough molle webbing around the belt mount all of the essentials like; magazine pouches, a dump pouch, a molle holster, and maybe a utility pouch. The battle belt is made to be used with a riggers belt. Also, for additional support a H-harness is recommended.
Specifications:
Manufacturer: Condor Outdoor
Model: Battle Belt
Color: OD
Size: L (43"), approx. waist size: 42 - 46
Features:
Light weight, low drag
Molle webbing
To be used with riggers belt
H-harness is recommended for additional support
- Specifications
- Manufacturer: Condor Outdoor
- Color: Olive Drab
- Size: Large
- Material: Nylon Webbing / Padding
- Package Includes: One (1) Battle Belt
see 3 reviews
| Write a Review
verified buyer
verified buyer
verified buyer
Z. POLLAK
|
2009-02-23
Product Information:
Very nice piece. I tempted fate, and waited to try out my ALICE pistol belt to see if I could use it in conjunction with it, and you CAN. Its a tight fit, but I imagine loads better than the riggers belt.
Also, either I got the wrong size, they are sized a little too big(aka a large should be labled as a smaller waist size,) or im just too fat :)
I use this piece in conjunction with some suspenders, 2 triple m4 MOLLE mag pouches/, and my condor drop leg(god i hate that thing) and a dump pouch as my 'recon' or light load out.
Heavier, I throw on my $20 OETech chest rig, 9 more midcaps, and run 1500 rounds when I dont have to move a lot, hah ;)
Any questions, shoot me an IM: BigBabyMoses06
Pros:
Plenty decent construction for airsoft.
2 slots on each bottom side to attach drop legs.
Very comfortable and well padded.
Cons:
First two (top and bottom on each end, 4 in total) MOLLE straps have extra material, and I could not get my pouches in there, so I had to fit it just like the picture shown.
Very nice piece. I tempted fate, and waited to try out my ALICE pistol belt to see if I could use it in conjunction with it, and you CAN. Its a tight fit, but I imagine loads better than the riggers belt.
Also, either I got the wrong size, they are sized a little too big(aka a large should be labled as a smaller waist size,) or im just too fat :)
I use this piece in conjunction with some suspenders, 2 triple m4 MOLLE mag pouches/, and my condor drop leg(god i hate that thing) and a dump pouch as my 'recon' or light load out.
Heavier, I throw on my $20 OETech chest rig, 9 more midcaps, and run 1500 rounds when I dont have to move a lot, hah ;)
Any questions, shoot me an IM: BigBabyMoses06
Pros:
Plenty decent construction for airsoft.
2 slots on each bottom side to attach drop legs.
Very comfortable and well padded.
Cons:
First two (top and bottom on each end, 4 in total) MOLLE straps have extra material, and I could not get my pouches in there, so I had to fit it just like the picture shown.
verified buyer
M. OHANESIAN
|
2010-01-29
Product Information:
IMPORTANT: The size as labeled for these belts is not the same as typical waist size. I ordered the whole setup with the H-harness, battle belt, and pouches. Unfortunately, only the battle belt was on backorder so I had all the stuff waiting for a month before I could try everything together (call ASGI and make sure it is in stock before you order) only to find out that the belt didn't fit. Granted I have a bigger than average waist for a 22 year old (size 46), the belt advertised as 42-46. My size 40 waisted brother tried it on and it fit him perfectly, which tells me you need to order the belt 3 sizes up
Pros:
Very solid, padding is comfortable, has openings on both sides for drop leg and even accommodates my oe tech dump pouch
Cons:
Not enough sizes
IMPORTANT: The size as labeled for these belts is not the same as typical waist size. I ordered the whole setup with the H-harness, battle belt, and pouches. Unfortunately, only the battle belt was on backorder so I had all the stuff waiting for a month before I could try everything together (call ASGI and make sure it is in stock before you order) only to find out that the belt didn't fit. Granted I have a bigger than average waist for a 22 year old (size 46), the belt advertised as 42-46. My size 40 waisted brother tried it on and it fit him perfectly, which tells me you need to order the belt 3 sizes up
Pros:
Very solid, padding is comfortable, has openings on both sides for drop leg and even accommodates my oe tech dump pouch
Cons:
Not enough sizes
N. HALVERSON
|
2013-01-02
Product Information:
This is a great platform to make a Light Weight rig. (I made an APOC rig )
It has enough MOLLE space to have a decent amount of ammunition, if you need more i highly recommend the dropleg MOLLE platform.
The build quality is solid, all the stitching is good and looks like it could hold a ton of gear without ripping.
The belt is alot more comfortable and padded than it looks.
I highly recommend you get the H harness with this. I made a low drag platform from mine, and the load is set right on your shoulders if you use the H harness, allowing you to make as heavy of a dropleg as you want.
NOTICE!!!
if you plan on getting the OE Tech Riggers Belt to go with this. GET 1 SIZE TO LARGE!!!
This belt ads somewhere from 1/4 to 1/2 an inch all the way around your waste. Making the size much greater than normal.
I wear "Large" clothing, and as such got the Large riggers belt. It was a dead match, perfect fit. But when i threaded it onto the belt it wasnt even close. So now i need to order a new belt in XL
Pros:
Build Quality and Material
Size is dead on ( other guy must have gotten one thats improperly labeled)
The color is true OD, not the off ranger grey some companies give you
Very evenly distributes load from a dropleg platform
Cons:
Ups the size of riggers belt you need, DO YOURSELF A FAVOR. take my word, and get 1 size larger. I wish i would have right off the bat...
This is a great platform to make a Light Weight rig. (I made an APOC rig )
It has enough MOLLE space to have a decent amount of ammunition, if you need more i highly recommend the dropleg MOLLE platform.
The build quality is solid, all the stitching is good and looks like it could hold a ton of gear without ripping.
The belt is alot more comfortable and padded than it looks.
I highly recommend you get the H harness with this. I made a low drag platform from mine, and the load is set right on your shoulders if you use the H harness, allowing you to make as heavy of a dropleg as you want.
NOTICE!!!
if you plan on getting the OE Tech Riggers Belt to go with this. GET 1 SIZE TO LARGE!!!
This belt ads somewhere from 1/4 to 1/2 an inch all the way around your waste. Making the size much greater than normal.
I wear "Large" clothing, and as such got the Large riggers belt. It was a dead match, perfect fit. But when i threaded it onto the belt it wasnt even close. So now i need to order a new belt in XL
Pros:
Build Quality and Material
Size is dead on ( other guy must have gotten one thats improperly labeled)
The color is true OD, not the off ranger grey some companies give you
Very evenly distributes load from a dropleg platform
Cons:
Ups the size of riggers belt you need, DO YOURSELF A FAVOR. take my word, and get 1 size larger. I wish i would have right off the bat...
Other Great Deals and Accessories:
Select the item from the Drop Down Menu and click add.
Search Tags: Light Weight Low Drag Low Profile MOLLE Kit Condor
Related products:
