Madbull M4 Length barrel for M4/M16
[02725 / BARREL-02]
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
The Mad Bull One Piece M4 Length Outer Barrel is constructed from light weight aluminum and fits most of the M4/M16 AEG on the market. This barrel is a great choice if you plan to convert your M16 into an M4 or if you plan to replace an old multi-piece outer barrel. One piece outer barrels are less susceptible to "barrel wobble" and their overall construction is stronger.
Features:
Fits Most M4/M16 AEG On The Market
Light Aluminum Construction
One Piece Reinforce Barrel
NC Processed
- Specifications
- Manufacturer: Madbull Airsoft
see 3 reviews
| Write a Review
verified buyer
verified buyer
verified buyer
C. JANG
|
2008-04-02
This barrel is sweet. If youre looking to replace your regular tokyo marui or any 2 piece barrel this is the one. This barrel is made from strong aluminum which makes it light and durable. It is very easy to install, literally took me 3 minutes without instructions. Also it comes at a very affordable price. Only week point i can see is the two allen screws that keep the adjustable part in place. All in all this is a great one piece barrel that removes barrel wobble and just improves the "solidness" of youre gun.
verified buyer
D. SHEA
|
2008-11-09
Product Information:
Used this to turn CA M15A4 CQB into an M4SOPMOD. SOLID fit. just beware of old type CA uppers it took my gunsmiths hammer and a nylon head to get it into place. No wiggles wobbles or anything to report. I have fit a Madbull Black python TB inner as well as a JBU 6.03 with no sanding or mods required. Price is great. Once again another awesome product from madbull that doesn't cost an arm and a leg. Just make sure you tread lock the lock screws up by the delta ring.
Pros:
SOLID
Great price
Seems to accept different inners without modification
Cons:
Screws could be a liability if ignored
tight fit in upper. ( could be a good thing if you don't plan on removing it
Used this to turn CA M15A4 CQB into an M4SOPMOD. SOLID fit. just beware of old type CA uppers it took my gunsmiths hammer and a nylon head to get it into place. No wiggles wobbles or anything to report. I have fit a Madbull Black python TB inner as well as a JBU 6.03 with no sanding or mods required. Price is great. Once again another awesome product from madbull that doesn't cost an arm and a leg. Just make sure you tread lock the lock screws up by the delta ring.
Pros:
SOLID
Great price
Seems to accept different inners without modification
Cons:
Screws could be a liability if ignored
tight fit in upper. ( could be a good thing if you don't plan on removing it
C. MERTINS
|
2009-08-02
Product Information:
I really like this barrel. It feels very sturdy, the paint is very hard to scratch and it has some nice "Noveske" markings near the tip. I fits nicely on my receiver too.
There is almost no wobble at all, only about half a milimeter to each side that is only noticeable if you grab the tip and intentionally pull it to the sides. Its the best fitting barrel Ive seen so far.
As a side note, I would like to compliment airsoftgi´s service. I ordered this barrel with my brother, but got an INNER barrel instead. I called them, and 2 days after that they sent the correct item, without even waiting for me to ship to them the wrong item first. If someone at gi´s is reading this: I will be sending the inner barrel with my grandmother, who is traveling near you on the 10th. You should receive it on the 15th-16th. You guys honored your word on sending me the right item, Ill honor mine by sending the inner barrel to you.
Pros:
Really sturdy
Very well done
Nice markings
Extremely nice fit
AirsoftGi´s extremely nice and trustworthy service.
Cons:
The adjustable screws on the base of the barrel that allows to adjust the lenght might become an issue if you dont pay attention that they dont get loose.
I really like this barrel. It feels very sturdy, the paint is very hard to scratch and it has some nice "Noveske" markings near the tip. I fits nicely on my receiver too.
There is almost no wobble at all, only about half a milimeter to each side that is only noticeable if you grab the tip and intentionally pull it to the sides. Its the best fitting barrel Ive seen so far.
As a side note, I would like to compliment airsoftgi´s service. I ordered this barrel with my brother, but got an INNER barrel instead. I called them, and 2 days after that they sent the correct item, without even waiting for me to ship to them the wrong item first. If someone at gi´s is reading this: I will be sending the inner barrel with my grandmother, who is traveling near you on the 10th. You should receive it on the 15th-16th. You guys honored your word on sending me the right item, Ill honor mine by sending the inner barrel to you.
Pros:
Really sturdy
Very well done
Nice markings
Extremely nice fit
AirsoftGi´s extremely nice and trustworthy service.
Cons:
The adjustable screws on the base of the barrel that allows to adjust the lenght might become an issue if you dont pay attention that they dont get loose.
|
|
g&g combat machiine fit
will this fit a g&g combat machine M4 shorty? I'm trying to make the barrel longer because the CQB place I played a got shut down.
3406 days ago James S
1
0
(I have this same question)
It should fit a G&G Combat Machine M4 Raider Shorty. However changing the outer barrel length will not make the gun be any more accurate. You would also need a longer inner barrel.
3271 days ago
Henry G
0
0
|
1 answers 2 asked |
|
|
How long it this outer barrel? Also can the size of the outer barrel be good with a Daniel Defense MFR 9" RIS.
Please Respond. Thank you!
3547 days ago EJ J
0
0
(I have this same question)
Staff Answer:
M4 is 14.5 inches 3546 days ago 0
0
|
1 answers 1 asked |
|
|
Fit
Will a Miracle barrel be the right length for this?
3567 days ago Trey D
0
0
(I have this same question)
Staff Answer:
A 365mm Miracle Barrel will work. 3566 days ago 0
0
|
1 answers 1 asked |
|
|
Length
How many inches is this
3577 days ago Jason C
0
0
(I have this same question)
Staff Answer:
should be 14.5 3574 days ago 0
0
|
1 answers 1 asked |
Search Tags: External upgrade conversion thread field carbine M4 M16
People who bought this item also purchased:
