Airsoft GI G4-A2 Fire Brand AEG Airsoft Rifle
[20567]New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Never before have we built a gun with such a high value per dollar ratio. The base gun is a special Combat Machine Blowback M4 with a crane stock that's wired to the back. The brilliant techs at Airsoft GI have fitted a Madbull outer barrel, Official License Noveske Flash Hider, and 7" Madbull Troy TRX Free Float RIS. As a result, the final product is a unique CQB carbine with flush look and sturdy front end. We've worked out a special program with Combat Machine to build us a special M4 with a crane stock, sling mount, and the wires to the back, so we can eliminate the need for a PEQ box and keep a clean look. The Combat Machine was carefully chosen for their high quality, reliability and incredible value. We've dropped the G4 straight onto the ground from 8ft and 9ft with no visible damage to the body, this is the strongest plastic receiver on the market. Additionally, with the innovation and imagination from the Airsoft GI technical team we are building some of the highest quality guns that money can buy.
Attention Airsoft GI Customers:
This incredible offer is only available at Airsoft GI. If you were to buy all these parts individually it would cost over $450.00!
- 170 for the base gun
- 115 for the rail
- 45 for the barrel
- 50 for the flip sights
- 40 for the crane stock (assuming the gun is already wired for a crane stock)
- 30 for the flash hider
Specifications:
Manufacturer: Airsoft GI, G&G
Model: Fire Brand
Muzzle Velocity: 360-380 fps
Magazine Capacity: 450 rounds
Battery Type: Nunchuck (similar type batteries will also work, call Airsoft GI if you require more clarification)
Package Includes: Gun, High Capacity Magazine
Features:
Echo 1 SPR Front Sight
B2 Rear Sight
Special Combat Machine Model Base Gun
7" Troy TRX RIS
Pneumatic Blowback System
Dboys Outer Barrel
Noveske Flash Hider
Rear Sling Mount
Crane Stock, wired to rear
450 rounds Magazine
Please Note:
- Optic, Flashlight, and Vertical Grip are not included.
- Battery and Charger not included.
- This product is covered under a 45 days warranty against workmanship and defect, for more details contact Airsoft GI.
- This product is built to order, please allow 1-5 days additional processing time.
- In the event that the Noveske KX3 Flash Hider is not available it will be replaced with the Noveske KFH.
- Specifications
- Manufacturer: Airsoft GI
- Muzzle Velocity: 360-380 FPS
- Magazine Capacity: 450rds
- Fire Mode: Safe - Semi - Auto
- Color: Tan
- Material: Polymer
- Battery Pack: Not Included
- Package Includes: One (1) Gun, Magazine, KX3
- Outer Barrel Length: 10.5in
- Stock Type: Crane Stock
- Handguard: Troy TRX 7in
- Sight: Iron Sights
- Overall Length Extended: 32.25 Inches
- Overall Length Retracted: 28.25 Inches
- Cylinder Head Type: Polycarbonate
- Cylinder Type: G&G Blowback Cylinder
- Piston Head Type: Polycarbonate
- Piston Type: Polycarbonate
- Air Nozzle Type: M4/M16
- Tappet Plate Type: Ver. 2
- Spring Type: G&G 120
- Spring Guide Type: Ver. 2 G&G Metal Spring Guide
- Bushing Size: 8mm
- Bushing Type: Brass Bushings
- Gear Set Type: G&G Standard Ver. 2
- Switch/Wire Type: M4 Rear Wired
- Selector Plate Type: M4
- Cut Off Lever Type: Ver. 2
- Anti Reverse Latch Type: G&G Blowback Anti-Reversal Latch
- Motor Type: G&G Standard Motor (Long)
- Hop Up Type: Plastic
- Inner Barrel Length: 300mm
- Sector Gear Clip: No
- Fuse: Yes
- MOSFET: No
- Connector: Small Tamiya
- Quick Spring Change: No
- External
- Primary Build Material: Polymer
- Internal
- Gear Box: G&G Blowback Gearbox (Ver. 2)
- Options
- Spring Release: Yes
|
Is it polarstar convertible?
In the near future I would like to convert it. Right now I just don't have time nor the money to do it now
3182 days ago Austin S
0
0
(I have this same question)
Staff Answer:
You should be able to in the future 3181 days ago 0
0
|
1 answers 1 asked |
|
Construction.
What is the construction of the upper and lower receivers? Also what is the construction of the gear box?
3185 days ago elliot m
0
0
(I have this same question)
Staff Answer:
The upper and lower receiver are constructed out of a Nylon Fiber polymer for durability and flexibility. The construction of the gearbox is the same like our other G4 lines and G&G line. 3185 days ago 0
0
|
1 answers 1 asked |