Airsoft GI G4 PWS DMR Venom AEG Airsoft Rifle
[17688]New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Description:
Never before have we built a gun with such a high value per dollar ratio. The base gun is a special Combat Machine M4 Blowback with a crane stock that's wired to the back. The brilliant techs at Airsoft GI have fitted this fine gun with the Madbull PWS Front End Conversion Kit. As a result, the final product is a CQB-range carbine with unique looks and functionality. This is a part of a new line up of guns to be manufactured by Airsoft GI. We've worked out a special program with Combat Machine to build us a special pneumatic blowback M4 with a crane stock, sling mount, and the wires to the back, so we can eliminate the need for a PEQ box and keep a clean look. The Combat Machine was carefully chosen for their high quality, reliability and incredible value. We've dropped the G4 straight onto the ground from 8ft and 9ft with no visible damage to the body, this is the strongest plastic receiver on the market. Additionally, with the innovation and imagination from the Airsoft GI technical team we are building some of the highest quality guns that money can buy.
This incredible offer is only available at Airsoft GI. If you were to buy all these parts individually it would cost over $330.00!
- 170 for the base gun
- 120 for RIS kit
- 40 for the crane stock (assuming the gun is already wired for a crane stock)
Specifications:
Manufacturer: Airsoft GI, G&G
Muzzle Velocity: 390-400 fps
Magazine Capacity: 450 rounds
Battery Type: Nunchuck (similar type batteries will also work, call Airsoft GI if you require more clarification)
Package Includes: Gun, High Capacity Magazine
Features:
Special Combat Machine Model Base Gun
Pneumatic Blowback System
Keymod Rail Interface System
Rear Sling Mount
Crane Stock, wired to rear
450 rounds Magazine
Please Note:
- Scope is not included.
- Battery and Charger not included.
- This product is covered under a 45 days warranty against workmanship and defect, for more details contact Airsoft GI.
- This product is built to order, please allow 1-5 days additional processing time.
- Specifications
- Manufacturer: Airsoft GI
- Muzzle Velocity: 390-400 FPS
- Magazine Capacity: 450rds
- Fire Mode: Safe, Semi, Full-Auto
- Color: Black
- Material: Polymer / Metal
- Battery Pack: Not Included
- Package Includes: One (1) Gun, One (1) High Capacity Magazine
- Outer Barrel Length: 20 inches
- Stock Type: Crane Stock
- Handguard: PWS DI 15" Keymod
- Sight: Flip-up Front and Rear Sights
- Cylinder Head Type: Polycarbonate
- Cylinder Type: G&G Blowback Cylinder
- Piston Head Type: Ported Polycarbonate
- Piston Type: Polycarbonate
- Air Nozzle Type: M4 / M16
- Tappet Plate Type: Version 2
- Spring Type: G&G 120
- Spring Guide Type: Ver. 2 G&G Metal Spring Guide
- Gear Set Type: G&G Standard Ver. 2
- Switch/Wire Type: M4 Rear Wired
- Selector Plate Type: M4
- Cut Off Lever Type: Version 2
- Anti Reverse Latch Type: G&G Blowback Anti-Reversal Latch w/ Detensioner
- Motor Type: G&G Standard Motor (Long)
- Hop Up Type: Plastic
- Sector Gear Clip: No
- Fuse: Yes
- MOSFET: No
- Connector: Small Type
- Quick Spring Change: No
- External
- Primary Build Material: Polymer / metal
- Internal
- Gear Box: G&G Blowback Gearbox (Ver. 2)
- Options
- Spring Release: Yes
|
can you screw on a suppressor
Are you able to screw on a suppressor on this gun
2846 days ago Eva A
0
0
(I have this same question)
Staff Answer:
Most airsoft guns have 14mm CCW threading. 2845 days ago 0
0
|
1 answers 1 asked |
|
Bottom rail?
i cannot tell from the picture, but is there a rail on the bottom of the barrel? I think there is, but I just want to specify.
3176 days ago Nate L
0
0
(I have this same question)
Staff Answer:
Most keymod rails should be able to accept keymod rail sections adapters. 3172 days ago 0
0
|
1 answers 1 asked |
|
Does this gun come with a ~509mm, 6.03 inner barrel? | 0 answers 1 asked |
|
ETA
When will this be in stock
3306 days ago Ethan V
1
0
(I have this same question)
Staff Answer:
We are working to get more in stock as soon as possible 3305 days ago 0
0
|
1 answers 2 asked |
|
range | 0 answers 2 asked |
|
LiPo? | 0 answers 1 asked |
|
dimensions questions | 0 answers 3 asked |
|
blowback | 0 answers 2 asked |
|
What kind of magazine?
Can I use any standard M4/M16 magazine for this gun?
3470 days ago Kai S
0
0
(I have this same question)
Staff Answer:
yes 3469 days ago 0
0
|
1 answers 1 asked |
|
Threading?
What kind of threading does this gun have?
3484 days ago Chris K
0
0
(I have this same question)
Staff Answer:
It should be 14mm CCW 3481 days ago 0
0
|
1 answers 1 asked |
|
Inner barrel length?
Whats the inner barrel length?
3486 days ago Barbara C
0
0
(I have this same question)
Staff Answer:
It should be 509mm 3486 days ago 0
0
|
1 answers 1 asked |
|
Is there blowback on this gun
Does this gun have blowback on it
3503 days ago Gary C
0
0
(I have this same question)
Staff Answer:
It should 3502 days ago 0
0
|
1 answers 1 asked |
|
Range? | 0 answers 5 asked |
|
Does it come with....
Does it come with rails for the Keymod rail system?
3509 days ago Wes G
0
0
(I have this same question)
Staff Answer:
It does not. 3509 days ago 0
0
|
1 answers 1 asked |