Madbull Noveske 9" NSR KeyMod M4/M16 RIS (Black)
[W10E04][14084 / MB NOV NSR 9]Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Madbull is pleased to announce the release of ultra light-weight, uber ergonomic Noveske NSR handguard for the airsoft market! The NSR was designed with the goal of being the lightest and smallest free floating forend option to the M16 family of weapons. The KeyMod system offers a mounting platform for a variety of accessories and components. The KeyMod self-contained components/mounting hardware index and V-block onto the platform, achieving a secured and accurate hold to the system, while separate lugs take the recoil force off the fasteners. The pass through attachment method eliminates the need for loose screws and backing plates that can easily be lost, or difficult to install. Another advantage of the KeyMod system over the 1913 system is the direct attach eliminates the need for the 1913 system as a "middle Man" thereby reducing weight and accessory off-set from the center of the handguard. The Noveske NSR is the next evolution in rail section technology, don't get left behind!
Specifications:
Manufacturer: MadBull
Model: Noveske NSR
Color: Matte Black
Package Includes:
- Noveske NSR Rail
- Six (6) Barrel Nut Screws
- Barrel Nut
Features:
Keymod System for Variety of Accessories
Ultra Lightweight Rail System
Ergonomically Slim and Sleek
Smooth Textured Matte Black Finish
Component Placement at Eight Different Angles
User Friendly Mounting KeyMod Accessories
- Specifications
- Manufacturer: Madbull Airsoft
I got this for an m4 build I have to say I really like it, but let's get into the pros/cons
Pros:
Really nice finish
Very,very light rail
Thin rail makes it easy to grip
Very nice looking rail
Cons:
Finish can scratch easily.
No instructions (but it is pretty self explanatory on how to install it).
It isn't true to the real Noveske NSR rail because on the bottom side it isn't the keymod system, it just has holes to screw on a rail.
Doesn't come with a 9" rail slot to start off with.
9" hand guard comes right to the back side of the muzzle threads on my ICS M4 making a suppressor look fantastic
1 5/16 " Inner diameter, so if you want a suppressor to fit inside, there is your maximum size
Installs very quickly, but does require the G&P barrel nut to fit G&P and ICS rifles, along with a pack of shims.
The hand guard fits very well in the hand for shooters who like to use a C grip with the thump over the top rail or right along side it.
Fit and finish is good, the paint has some texture to it, and while it seems a bit cheap, it has so far held up fine. The rail mounts tightly to the barrel nut and the barrel nut is nice and snug on the upper receiver.
Here is my only gripe, the bottom is not keymod, and no 1913 rail section is included, though the bottom does have threaded holes to attach a section. for the price, a section really ought to be included.
Pros:
Lightweight
Easy install
Looks sharp
Cons:
bottom is not keymod, and no rail section is included despite the hand guard being setup to accommodate one.
This fit well on G&P upper (Vltor) madbull upper (PWS body 2 pin type) and classic army standard m15a4. Sturdy. Has great roll marked trades. Looks nice.
Pros:
Looks good. Nice trademarks.
Cons:
No keymod on bottom.
Keyholes are not chamfered. So will not fit Noveske brand NSR panels.
Have to figure out how to keep it stationary as there is no way to keep it from rotating even with a low profile gas block and gas tube installed.
I used a judicious amount of locktite on the barrel nut.
Other airsoft NSR type keymod (unbranded) rails similar have a set pin where the gas tube would go into the upper receiver tube.
|
suppresor compatability
What is the inner diamater on this rail system?
3377 days ago Alex O
0
0
(I have this same question)
Staff Answer:
The only mock suppressor that will fit will be the Gemtech Outback 3377 days ago 0
0
|
1 answers 1 asked |
|
WIl it fit a polarstar pr15?
WIl it fit a polarstar pr15?
3382 days ago Noah W
0
0
(I have this same question)
Staff Answer:
it should 3381 days ago 0
0
|
1 answers 1 asked |
|
Rails
Are the rails sold separate?
3512 days ago Trey D
0
0
(I have this same question)
Yes they are but i cant find any on GI, which means you will have to buy the real thing :/
3356 days ago
Clayton G
0
0
|
1 answers 1 asked |
|
Fit
Will this fit a kwa sr10
3542 days ago Angeluz G
0
0
(I have this same question)
Staff Answer:
It should 3542 days ago 0
0
|
1 answers 1 asked |
|
FIt | 0 answers 1 asked |
|
Will this fit on a KWA Cqr Mod 2
Will it fit?
3546 days ago Tyler S
0
0
(I have this same question)
Staff Answer:
It should fit 3546 days ago 0
0
|
1 answers 1 asked |