Tenergy LiPo 11.1V 1000mAh 20C Stick Battery & Charger Package
[12107 / Black Friday Special]Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Please Note: Lithium Polymer batteries MUST be charged with a Lithium Polymer Balance Charger!
The Airsoft GI Black Friday Specials are one of the few ways to save money this holiday season. Lithium polymer batteries provide a higher output over traditional NiMH / NiCd batteries. Not only will this package allow you to save more than $10, but the included charger is specifically designed to properly charge your battery quickly and safely allowing you to get out and play.
Description:
Lithium Polymer batteries are the newest available batteries for airsoft and other hobby toys. They are designed as a light weight, high output power source. This 11.1v Li-Po battery can deliver more power than 12v Ni-MH large type battery with only half of the size and a third of the battery cells.
Specifications:
Manufacturer: Tenergy
Voltage: 11.1v
Milliampere Hours: 1000mAh
Cell Type: Lithium Polymer (LiPo)
Connector Type: Mini
Recommended Fit: M4A1, AK, M14, MP5, G36
- The makers of LipoSack or its distributors or retailers assume no liability for failures to comply with these use and safety guidelines.
- By purchasing this product, the buyer assumes all risks associated with its intended use. If you cannot comply with these guidelines please return this product unused to your retailer.
1) Charge batteries in a safe area away from flammable materials and only on a non-flammable surface in a vented area. Do not discharge batteries below 3 volts/cell. Doing so may result in cell damage and subsequent cell venting upon a subsequent charge.
2) Do not recharge damaged batteries. Dispose of damaged batteries in the proper manner.
3) Some Lipo chargers on the market may have technical deficiencies that may cause it to charge the battery incorrectly or at an improper rate. It is your sole responsibility to assure that the charger you purchased works properly. Always monitor the charging process to assure batteries are being charged properly. Failure to do so may result in cell damage or fire.
4) In the event of a crash, you must remove the battery from the model for observation and place in a safe open area away from flammable materials.
LipoSack Use Instructions:
1) Ensure that charger rate is properly set and polarity is correct.
2) Attach charging leads to battery.
3) Place battery in LipoSack towards the bottom.
4) Place LipoSack on non-flammable surface.
5) Route charge leads through vent at the top seam of the LipoSack.
6) Close top flap of LipoSack and press hook and loop closure fully closed.
7) Charge battery using proper charging practices.
LiPoSack Use and Safety Instructions:
Battery safety:
∑ Lithium Polymer batteries are volatile. Failure to adhere to established charging guidelines may result in fire, personal injury and damage to property if charged or used improperly.
Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.
The Tenergy Li-Po / LiFePO4 Battery Charger is a very basic charger that is able to balance and charge your Li-po or LiFePO4 batteries. This charger extends the life of your battery by charging each cell individually to ensure that the cell is properly charged before use. The Tenergy Li-Po / LiFePO4 Battery Charger features a light weight and durable polymer case and is able to charge a battery with 1-4 cells.
Specifications:
Manufacturer: Tenergy
Model: Li-Po / LiFePO4 Battery Charger
Color: Silver
Package Includes: One (1) Charger
- Specifications
- Manufacturer: Tenergy
- Color: Black / Silver
- Material: Plastic / Metal
- Package Includes: One (1) Battery & Charger
|
charger
will the charger that come with this work with a 9.6v battery?
3609 days ago jason d
0
0
(I have this same question)
Staff Answer:
The charger in the package is strickly meant to charge LiPo Batteries. 3609 days ago 0
0
|
1 answers 1 asked |
|
back in stock
I would like to know if the battery and charger pack is back in stock? I ordered it in stock like 3 weeks ago.
3381 days ago Nicholas P
0
0
(I have this same question)
Staff Answer:
Please contact Customer Service for questions about your order 3380 days ago 0
0
|
1 answers 1 asked |
|
Will it fit | 0 answers 1 asked |
|
Battleaxe stoc
will this battery fit in a Madbull Battleaxe stock?
3423 days ago Johnnie L
0
0
(I have this same question)
Staff Answer:
It should fit in the buffer tube 3422 days ago 0
0
|
1 answers 1 asked |
|
VFC VR 16 Fighter Carbine | 0 answers 1 asked |
|
dimensions | 0 answers 1 asked |
|
Will it fit
Will it fit and work well with the krytac m4 crb please answer fast thank you
3495 days ago Cheryl S
0
0
(I have this same question)
Staff Answer:
It should fit. If you need to know something right away, contact our customer service department 3493 days ago 0
0
|
1 answers 1 asked |
|
VFC 416
Will this battery fit in the buffer tube of a VFC HK 416?
3518 days ago Jared N
0
0
(I have this same question)
Staff Answer:
It should 3518 days ago 0
0
|
1 answers 1 asked |
|
VFC SCAR L / SCAR H
Will this fit in the VFC SCAR L or SCAR H
3521 days ago Andrew H
0
0
(I have this same question)
Staff Answer:
It should fit, but will void the warranty 3520 days ago 0
0
|
1 answers 1 asked |
|
Right fit
Would this fit in a buffer tube?
3527 days ago Trey D
0
0
(I have this same question)
Staff Answer:
This should fit in most AEG buffer tubes. 3525 days ago 0
0
|
1 answers 1 asked |
|
Fit
Can this fit in a lancer tactical PEQ box
3531 days ago Eli H
0
0
(I have this same question)
Staff Answer:
no 3529 days ago 0
0
|
1 answers 1 asked |
|
KWA SR10 compatable
Are the tamiya plugs the right size for the KWA SR10?
3537 days ago Trey D
0
0
(I have this same question)
Staff Answer:
Yes. 3536 days ago 0
0
|
1 answers 1 asked |
|
Is this a smart charger?
Will this battery stop charging when the battery is completely charged?
3546 days ago Antonio A
0
0
(I have this same question)
Staff Answer:
Yes it is a smart charger 3543 days ago 0
0
|
1 answers 1 asked |
|
will it fit in an ARX-160 Elite
if so does it come with a charger or no???
3609 days ago Victoria S
0
0
(I have this same question)
Staff Answer:
This should fit, however an 11.1 is not recommended. 3609 days ago 0
0
|
1 answers 1 asked |
|
Will this fit in a magpul pts ctr stock w/ buttpad v.2
Wondering what lipo battery will fit in my magpul stock
3615 days ago Hunter D
0
0
(I have this same question)
Staff Answer:
This may fit, however it all depends on the amount of room inside of your buffer tube. 3613 days ago 0
0
|
1 answers 1 asked |
|
Will the fit a Small-Type Connector on an Apex m4?
The product information says mini connector.
3617 days ago Ryan M
0
0
(I have this same question)
Staff Answer:
A small and mini connector are the same 3616 days ago 0
0
|
1 answers 1 asked |
|
Does This Come With a Lipo sack?
Does This Come With a Lipo sack?
3647 days ago Sten C
0
0
(I have this same question)
Staff Answer:
Thick package deal does not include the LiPo sack. 3647 days ago 0
0
|
1 answers 1 asked |
|
will this work with an er-25
just wondering if it will work well with the gun but also if it will fit in the stock crane-stock
3653 days ago jeremy s
0
0
(I have this same question)
Staff Answer:
It should work. 3653 days ago 0
0
|
1 answers 1 asked |
|
Will this battery work well with my CM032 M14 AEG?
or should I use like a 9.6v LiPo?
3657 days ago Jack u
0
0
(I have this same question)
Staff Answer:
This should work. Keep in mind that using an 11.1v Lipo will put rapid wear & tear on your gun. 3654 days ago 0
0
|
1 answers 1 asked |
|
will this fit in an AR57?
I want to know if this will fit inside of the crane stock inclded with the AR57
3680 days ago Joe S
0
0
(I have this same question)
Staff Answer:
This should fit. 3679 days ago 0
0
|
1 answers 1 asked |
|
Will this fit in a crane stock???
I have an Echo 1 XCR-L Polymer version that has a 9.6v nunchuck battery that fits in the crane stock and i was wondering if this battery should fit as well.
3688 days ago Michael B
0
0
(I have this same question)
Staff Answer:
This should fit in a crane stock okay. 3687 days ago 0
0
|
1 answers 1 asked |