The Modify Modular Torque Up Gear Set for TM Gearbox Ver.2 is a drop in gear set that is good to go right out of the bag. The gears are held together and fall right into place, this item comes with metal bushings, and no shimming is required. This is the best way to change the gears in your Version 2 and 3 gearbox and save time on shimming. This is a "Torque Up" gear set, which means that the gear set is designed for high power springs.
2010-02-03 11:59:50 J. KEENAN verified buyer Product Information:
In the shop:
I almost never give anything five stars. Although I am very impressed by this product. Very well built very solid, not enough "O's" in smooth to describe the motion of the gears. Dropped right into the TM V2 mechbox, and everything stays in place while wrestling with the spring and closing the box. No shiming, no worries about gear alignment. Package includes new bushing and anti-reversal latch, and everything is a perfect fit.
In the field:
The high torque gears handle the M120 spring without breaking a sweat. Also reduced the ROF to a very nice place. Enough BB's per burst to lay some fire, yet easy on the magazine, less mag changes.
There is little doubt this product will be in my other two TM's before 2010 is over.
Ease of install
Keep in mind this model is only for TM mechboxes.
2008-09-10 00:00:04 S. ALLEN Product Information:
These gears are simply amazing. I installed them in my TM Mp5SD, it has a reinforced piston and a 120 spring, as well as a high torque motor. They were so dang easy to install, and I plan on ordering them again for my M4.
I highly recommend them!
Also, the Anti-Reversal latch has a notch in the top of it, making it very easy to release the piston if it gets stuck. These are the best gears I've ever used.
After 15000 rounds, they are still going strong.
Easy to install
Great Anti-Reversal latch
Not enough gear grease. But most people have a tub of it lying around!
2008-03-15 18:14:17 G. MASHBURN verified buyer As it says, definitely does not not work on CA or Systema V2 7mm gear box I tried it in both of mine. Also reversal latch is just a bit to tall on the shoulder and caused some back spin and miss feeds
Some of you may know that I have been working on my airsoft guns for approximately five years now. From AEG's to GBB's. I've always had a reason to repair or upgrade a few guns here and there. I've been playing Airsoft for about six years now. I usually prefer the fast paced CQB games, but I do play Milsim games when asked to. I started playing airsoft at a place called Airsoft Playground before Tac City North was around. On days that I do play, the most common type of Airsoft Gun I see on the field is an AEG. A lot of people, back then, were not very knowledgeable on the internal of an Airsoft gun. To start off, different airsoft guns have different versions gearbox. However, the types of parts inside are all the same. One of the most important parts is the gears, which operate the internal of the airsoft gun.
Airsoft GI sells a wide variety of gears from different companies suitable for your limits and desires. To those just looking to increase the durability of your gun, Echo 1 Performance Gear Sets have different ratio gear sets from speed to torque. Continuing up the ladder, for those that are looking to increase both performance and durability, Siegetek gears are the way to go. The type of material Siegetek uses as well as the precise specification of every tooth spacing and diameter on the gear shaft are what give them their name. Siegetek, former RiotSC, has manufactured gears for some time now but it is only recently that Airsoft GI has finally carried these amazing products. Whether, you want a high speed setup or a designated marksman rifle that shoots at 600+ feet per second, their selection of gears can handle them all. The only downside is that currently, they are only offered to airsoft guns that use a Version 2 or a Version 3 gearbox.
Don't think Echo 1 and Siegetek are the only two brands that I would recommend. Airsoft GI carries gears from manufacturers such as Modify, Bravo, and Prometheus, which are great gears as well. Some manufacturers such as SHS, X- Hightec, Combat Squad, etc. also manufacture great gears; however, in my opinion, they are not as well made as Siegetek. Once you have decided what gear set you want, next is the installation. For those that are just beginning to learn to upgrade their gun, its important that you find a qualified technician, whether its a recommendation from a friend or a store tech and you trust. The techs at Airsoft GI are highly qualified for any work done to any gun.
When I work on my airsoft guns, I try to depict the best way to achieve maximum efficiency while maintaining my desired velocity and rate of fire. I would choose a gear set with a given ratio to calculate an approximate rate of fire output on a certain Lithium Polymer battery. I would then polish my gears to reduce friction between the shafts and bearings. By polishing those critical areas, any grease and lubricant applied will be evenly distribute along those surfaces, and prevent them from going to unwanted places.. I use a different lubricant for the compression parts, but that will be another article..
In conclusion, by determining the right set of gear and reducing as much friction on the surface as possible, you could achieve a reliable,
long lasting setup. But most importantly, unless you are working on your own guns, itís important that you have the right technician for the job. I am Marq, be safe, and get out and play airsoft.
Please Note: Please be respectful and do not use any profanity. Any questions regarding the removal of the orange tip will be deleted.
Will these fit in a G&G gearbox
I have a G&G CQB-R and I was wondering if there were compatible with that gearbox.
34 days ago
(I have this same question)
Staff Answer: This product should fit okay in a G&G gearbox.
34 days ago
1 answers 1 person asked
This product was added to our catalog on Saturday 20 October, 2007.
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them. Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law. By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.