Airsoft GI small logo

Burst Wizard King Kong Super 2 Small Tamiya Connector Mosfet

[S04J02][16004]
$37.99
( 8 Reviews ) ❤ Add to Wishlist
ADD TO CART
Also available at: CA Walk In Store
Orders over $179 qualify for free shipping
Free Shipping for orders over $179 No Coupon needed
New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
The Burst Wizard King Kong Super 2 ( BWKKS2 ) MOSFET for AEG allows the user to easily and nearly seamlessly flip between burst firing mode into pure MOSFET mode. This plug-and-play MOSFET system contains a large amount of features but contains even more programmable features when hardwired to your AEG. With almost every field, thereis some sort of firing limitation, what is more easily and economically accomplished than installing the BWKKS / BWKKS2 into any of your AEGs. Adaptive Smart Resettable Fuse is our proprietary feature that protects your valuable AEG in the event that your gearbox / motor is lockup or wiring short. It will cut off power to the motor in a fraction of a second to prevent any real damages done to the gearbox, motor and wiring regardless of battery types, battery voltage, your AEG power rating and battery draining conditions. Overall, this is a great addition to your AEG to increase the overall function as well as longevity without breaking the bank.

Specifications:
Manufacturer: Burst Wizard King Kong Super 2
Modes: Programmable
Package Includes: One (1) MOSFET System

Features:
Programmable Fire Modes
Pre-Setup ROF Adjustment
Compact Design

Specifications
Manufacturer: Burst Wizard
Color: Black, Red
Material: Rubber, Silicone, Metal, Plastic
Package Includes: One (1) MOSFET System
see 8 reviews | Write a Review
verified buyer
M. SNYDER | 2014-03-21
Product Information:
greatly improves your gun everyone should get this now

Pros:
improves your gun , makes your battery last longer , and has amazing trigger response time

Cons:
none it is a great must have piece in anyone arsenal
M. SUN | 2014-03-26
Product Information:
This is a great little mosfet. It's really useful for all sorts of things.

Pros:
Small and easy to use
Sniper delay and mag delay for extra realism
If you have midcaps, mag delay can make your gun stop firing when you run out of ammo

Cons:
Might not fit in really small battery compartments
verified buyer
J. ZALUSKA | 2014-04-01
Product Information:
This MOSFET is really easy to use, and it has way more settings then I would have ever imagined. The plug and play aspect of it made all the difference in the world, although it comes with the option to hard wire it if that's what you are looking for. Very impressed!

Pros:
Ease of use
Lots of settings
Change on the fly

Cons:
Not always timed with the gearbox.
 
Will this fit an M4/M16 0 answers
1 asked
 
Will it fit in ARX-160?
I have the Beretta Umarex ARX-160 Elite. Will I be able to use this mosfet in it?

3247 days ago
Michael P
0
0

(I have this same question)
Staff Answer:
It should work

3246 days ago
0
0
1 answers
1 asked
 
Ump
I have a H&K Ump and the battery compartment is pretty small. Will the mosfet wizard fit in there.

3251 days ago
Erik S
0
0

(I have this same question)
Staff Answer:
No

3248 days ago
0
0
1 answers
1 asked
 
Braking
Is this a active braking mosfet

3285 days ago
Collin M
0
0

(I have this same question)
Staff Answer:
Yes, all King Kong MOSFETs have active and adjustable active-braking.

3284 days ago
0
0
1 answers
1 asked
 
Protection
will this protect a HK M27 gearbox from 11.1 lipo damage?

3294 days ago
Zach F
0
0

(I have this same question)
Staff Answer:
It will help protect the trigger contacts

3291 days ago
0
0
1 answers
1 asked
 
will this work for the lancer tactical ak74u connector
will this work for the lancer tactical ak74u connector if not witch type of connector will.

3383 days ago
Abdullah G
0
0

(I have this same question)
Staff Answer:
It should

3379 days ago
0
0
1 answers
1 asked
 
Will this work?
Will this work with the jg ak -47 ris?

3391 days ago
Keith K
0
0

(I have this same question)
Staff Answer:
It should

3387 days ago
0
0
1 answers
1 asked
 
Restock?
when will you restock

3438 days ago
zane z
0
0

(I have this same question)
Staff Answer:
We are working on getting more in stock

3437 days ago
0
0
1 answers
2 asked
 
anti reversal latch
With the mosfets active braking feature will it be okay to remove the anti reversal latch from my v2 gearbox?

3501 days ago
jeremy s
0
0

(I have this same question)
Staff Answer:
No, you still need the anti reversal latch

3498 days ago
0
0
1 answers
1 asked
 
Can you program it to stop shooting when there is no bbs feeding.
Basically will it be able to simulate the mag emptying and stop shooting.

3507 days ago
Grant B
0
0

(I have this same question)
Staff Answer:
No

3506 days ago
0
0
1 answers
1 asked
 
Will this mosfet limit an AEG to semi-auto?
I play at a CQB field that is semi-auto only. The semi-auto in my favorite AEG broke though, keeping me from using it at that field. If I install this mosfet can I program it to limit me to one shot fired per trigger pull even when my gun does nothing to mechanically limit me to semi-auto?

3509 days ago
Haines T
0
0

(I have this same question)
Staff Answer:
It is possible

3508 days ago
0
0
1 answers
2 asked
 
can this fit a cyma cm032a m14?
just curious

3526 days ago
Dorion H
0
0

(I have this same question)
Staff Answer:
It should

3522 days ago
0
0
1 answers
1 asked
 
Lipo battery
Will it stop the gun from shooting before the lipo dies

3535 days ago
drew r
0
0

(I have this same question)
Staff Answer:
Lipo protection is a programmable feature

3534 days ago
0
0
1 answers
1 asked
 
Will this work with the RM4?
I'm not sure if this would mess up my RM4, because of the precocking setting. Would this also precock the kinetic feedback system, or just the spring? If it doesn't then the whole gun would be out of tune, when shooting.

3539 days ago
Donna P
0
0

(I have this same question)
Staff Answer:
This will work with the RM4. You can take off the pre-cocking setting on the burst wizard.

3536 days ago
0
0
1 answers
1 asked
 
If i put this in will it protect my gear box from a 11.1 volt lipo?
I really want to get a lipo battery but I don't want to break my gun so would it stop it and may it not burn out any of my gear box?

3540 days ago
Howard E
0
0

(I have this same question)
Staff Answer:
It mainly depends on what airsoft gun you have.

3540 days ago
0
0
1 answers
1 asked
 
Will this work on the SRC Ak beta?
Just wondering. I know it's not sold on ASGI unfortunately so I don't expect for you guys to know but if you do, it would definately be appreciated. :D

3542 days ago
Angel C
0
0

(I have this same question)
Staff Answer:
If the connector is a small tamiya, then yes.

3539 days ago
0
0
Just wondering. I know it's not sold on ASGI unfortunately so I don't expect for you guys to know but if you do, it would definately be appreciated. :D

3542 days ago
Angel C
0
0

(I have this same question)
Staff Answer:
If the connector is a small tamiya, then yes.

3539 days ago
0
0
2 answers
1 asked
 
Will this fit in a buffer tube?
Will this fit In a mil-spec buffer tube?

3549 days ago
Tyler Q
0
0

(I have this same question)
Staff Answer:
it should, however it depends on what battery you're using

3549 days ago
0
0
1 answers
1 asked
 
Trigger contacts
Will it protect your trigger contacts like other mosfets?

3549 days ago
Nazneen I
0
0

(I have this same question)
Staff Answer:
Only if it is hard wired into the gun

3549 days ago
1
0
1 answers
1 asked
 
Will this fit in the g&g firehawk
I'm thinking of getting the g&g fire hawk and running it with a 11.1 so will this fit and does it offer lipo protection thanks

3553 days ago
Anh Dao H
0
0

(I have this same question)
Staff Answer:
Yes this will fit.

3550 days ago
0
0
1 answers
1 asked
 
will this protect my internals from lipo damage without hardwiring it? my gun is totally stock and isn't designated as "lipo re
Want to switch to lipo

3557 days ago
casey b
0
0

(I have this same question)
Staff Answer:
No it will not protect your internals. It will prevent you from burning out your trigger contacts

3556 days ago
0
0
1 answers
1 asked
 
how do you hardwire this mosfet into a dboys m4 wired to the rear?
Want to go lipo so looking to hardwire this in to my gun to protect my internals

3557 days ago
casey b
0
0

(I have this same question)
Staff Answer:
It comes with instructions on how to do so

3556 days ago
0
0
1 answers
1 asked
 
Will this fit an src
I have an src sr4 it is a model ge-0501

3565 days ago
Bryce M
0
0

(I have this same question)
Staff Answer:
If you have enough room, it will work

3564 days ago
0
0
1 answers
1 asked
 
which connector do i need
i have an src sr4 the model is a GE-0501

3566 days ago
Bryce M
0
0

(I have this same question)
Staff Answer:
Most likely the small connectors

3564 days ago
1
0
1 answers
1 asked
 
Has anyone had any problems using this with the vfc HK416 and a 9.6 1600 nunchuck? 0 answers
1 asked
 
What's wrong with my mosfet?
After the burst my gun would fire an extra 1-3 bbs, it wasn't doing that this morning. I disconnected it from my gun and pulled the trigger on auto and let go and no bbs came out. I plugged the Mosfet back in and it did it again, then it wouldn't do anything at all. I didn't do anything different then i usually do. I never spilled water on it or anything liquid. Any suggestions?

3569 days ago
Daniel h
1
0

(I have this same question)
did they answer your question about your mosfet

3286 days ago
Ramon R
0
0
After the burst my gun would fire an extra 1-3 bbs, it wasn't doing that this morning. I disconnected it from my gun and pulled the trigger on auto and let go and no bbs came out. I plugged the Mosfet back in and it did it again, then it wouldn't do anything at all. I didn't do anything different then i usually do. I never spilled water on it or anything liquid. Any suggestions?

3569 days ago
Daniel h
1
0

(I have this same question)
Staff Answer:
Please contact our sales department at 1(909)869-0671

3569 days ago
1
0
2 answers
2 asked
 
Is the mosfet comparable with a 11.1v Lipo?
One of the feature the mosfet has is that it protects the gun from power surges. Will the 11.1v lipo set off the fuse. Also the mosfet doesn't do anything to re-route the transfer of electricity through the trigger contacts because of it's easy connect characteristics. So trigger arching will still be an issue correct?

3594 days ago
julian l
0
0

(I have this same question)
Staff Answer:
It is a feature that has to be activated, and you should experience little or no arching if it was hardwired correctly

3592 days ago
0
0
1 answers
1 asked
 
could it fit an elite force m4 cqb?
I recently just got an aeg so i could have a dmr,field,and cqb gearboxes and new barrels and i want different settings on the burst wizard and the crane stock isnt exactly big so

3606 days ago
Jake D
0
0

(I have this same question)
Staff Answer:
It should be able to fit.

3605 days ago
0
0
1 answers
1 asked
 
which one will work
Will this one work for the a&k Masada or do I need the large one? Also will this work with a g&g gr18 like?

3607 days ago
David K
0
0

(I have this same question)
Staff Answer:
You will most likely need a the small connector.

3606 days ago
0
0
1 answers
1 asked
 
Trigger Arcing 0 answers
2 asked
 
Can I Remove The Burst Function And Keep The Full Auto Function
I love all the features besides the burst

3615 days ago
Jake D
0
0

(I have this same question)
Staff Answer:
Yes, it is possible to have semi and full auto with the Burst Wizard.

3613 days ago
1
0
1 answers
1 asked
 
Will this fit a KM4
I have a KWA KM4, and an 11.1v lipo, would this fit? (The Lipo does not fit into the battery tube, it just sits directly on the inside of the butt plate). It is a tight fit just to fit my battery in, how much space does this take up? If there isn't enough room, I heard about hard wiring it into your AEG, how does that work, and how much would that cost? Would I be able to change settings after it is hardwired? Thanks!

3626 days ago
Jacob D
0
0

(I have this same question)
Staff Answer:
This will easily fit inside the buffer tube with space left over. Hard wiring means opening the gearbox and soldering the gate wire to the contacts. This will allow you to have more settings.

3625 days ago
0
0
1 answers
1 asked
 
Can you eliminate the burst to full auto delay completely?
I play a lot of CQB and like to have just full auto. Can I eliminate the delay?

3639 days ago
Ryan K
0
0

(I have this same question)
Staff Answer:
Yes you can eliminate the delay.

3638 days ago
2
0
1 answers
1 asked
 
Will this fit into an ics cxp16L? 0 answers
1 asked
 
Whhat would be the programming setup times for a Mil-Sim CYMA M14 SOCOM 16? 0 answers
1 asked
 
Am I able to replace my semi-auto with burst?
I would like to switch my semi-auto to burst whilst keeping my full auto selector.

3660 days ago
River H
0
0

(I have this same question)
Staff Answer:
No, it will only replace the full auto function.

3660 days ago
0
0
1 answers
1 asked
 
Can you disable the precocking function?
I have stock jg m4 internals and I don't want to fink them up!

3669 days ago
David R
0
0

(I have this same question)
Staff Answer:
By default, the pre-cocking function is set to off.

3669 days ago
0
0
1 answers
1 asked
 
If i add this to my gun, will i need a fuse anymore?
Title

3672 days ago
Mitchell B
0
0

(I have this same question)
Staff Answer:
The fuse should not be needed.

3669 days ago
0
0
1 answers
1 asked
 
is it small enough to fit in the battery well of an Ares TAR-21?
the Ares TAR-21 has a small well for the battery, will this be to cramped for all the components. or is there a lipo small enough to accommodate the space with the burst wizard.

3673 days ago
Jesse V
0
0

(I have this same question)
Staff Answer:
I should fit with a small lipo.

3672 days ago
0
0
1 answers
1 asked
 
Which should i choose small, or large tamiya connector?
I have a KWA CQR MOD 2, and would like to purchase one of these burst wizards, so I can have programmable fire modes on my gun, but one problem which type of connector fits the KWA CQR MOD 2 small, or large tamiya connector?

3673 days ago
Susie G
0
0

(I have this same question)
Staff Answer:
Small Tamiya.

3673 days ago
0
0
1 answers
1 asked
 
Will this protect my internals if i put a lipo battery into a gun
that's not lipo ready?

3682 days ago
John U
1
0

(I have this same question)
Staff Answer:
This will protector your connectors, but your internals will still suffer more wear & tear than 9.6v NiMH or 7.4v Lipo.

3681 days ago
0
0
1 answers
2 asked
 
Does this only change the full auto function?
Can I only change the full auto function to burst function or can I change the other functions (semi auto, etc.) instead of the full auto function?

3683 days ago
Danton N
0
0

(I have this same question)
Staff Answer:
This product should only change the full auto function.

3682 days ago
0
0
1 answers
1 asked
 
could this fix my full auto issue?
I have a matrix m4 and it started firing full auto randomly when the battery gets connected and i was wondering if this mosfet could fix the problem cause it controls the power sent to the motor or something... idk

3683 days ago
Gregory W
0
0

(I have this same question)
This could help, but check your wires to make sure they are all connected correctly or frayed.

3249 days ago
Ryan D
1
0
1 answers
1 asked
 
Can i use this on a Magpul Masada?
Can i use this on a Magpul Masada? Since it has a micro swtich. Thanks.

3683 days ago
Kevin L
0
0

(I have this same question)
Staff Answer:
This should work.

3683 days ago
0
0
1 answers
1 asked
 
Will this work with 9.6v 2000MaH NiMh bat?
I have a 9.6v 2000MaH NiMh battery and am wondering if this will work

3687 days ago
Anthony G
1
0

(I have this same question)
Staff Answer:
The Burst Wizard is meant to be used with any type of battery and should not have any issues with this one.

3686 days ago
0
0
1 answers
1 asked
 
Does it protect the wires?
So i'm not really familiar with mosfets and recently I got two 2200 mah 20c lipos for RC and they burnt up my wires, so can I use this to protect my wires and still use the lipos i have?

3689 days ago
Keaton C
0
0

(I have this same question)
Staff Answer:
This product should be able to protect your gearbox and wires okay.

3689 days ago
0
0
1 answers
1 asked
 
Will it work with a microswitch trigger
My gun has a micro switch trigger in it. Will this product work with it? I have an elite force m4 cqb

3690 days ago
John H
0
0

(I have this same question)
i believe so and i too have and elite force m4 cqb

3606 days ago
Jake D
0
0
My gun has a micro switch trigger in it. Will this product work with it? I have an elite force m4 cqb

3690 days ago
John H
0
0

(I have this same question)
Staff Answer:
This should work with the King Kong Mosfet unit.

3689 days ago
0
0
2 answers
2 asked
 
Can I put this mosfet into another mosfet?
Well i have a A&K Masada and i put a mosfet on it to replace the stock connections to prevent bad arc-ing. Now i see that the burst wizard can do alot of things but i already have a basic mosfet. So can i still put this on my acr?

3698 days ago
Christopher P
0
0

(I have this same question)
Staff Answer:
That configuration may cause problems for the gun, and is not recommended by ASGI.

3696 days ago
0
0
1 answers
1 asked
 
Is it really worth $37?
I've been manually burst firing ever since my first AEG years ago. is it really worth almost $40 just for an attachment that just dose it for me?

3699 days ago
David M
0
0

(I have this same question)
This is a programmable device, you can have custom settings as opposed to just three round.

2789 days ago
Luke R
1
0
I've been manually burst firing ever since my first AEG years ago. is it really worth almost $40 just for an attachment that just dose it for me?

3699 days ago
David M
0
0

(I have this same question)
It will make your gun last longer and also ultimately up the performance i think it's actually a good deal!

3481 days ago
James E
1
0
I've been manually burst firing ever since my first AEG years ago. is it really worth almost $40 just for an attachment that just dose it for me?

3699 days ago
David M
0
0

(I have this same question)
It's not just a burst function. It's a "smart" mosfet. The burst is just a feature added to it, along with other things.

3695 days ago
Gabriel S
2
0
3 answers
1 asked
Search Tags: Mosfet Electrical Burst Plug & Play And Easy Installation Adjustable Magazine Delay AEG Pre Cocking PRecocking

For Questions, Answers and Comments:

Talk about the Burst Wizard King Kong Super 2 Small Tamiya Connector Mosfet with your friends on the facebook comments box below:
Copyright © 2024 Airsoft GI
Disclaimer:

All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.

Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.

By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.